Yicong YT500 SMP Series Wifi Projector User Guide

May 15, 2024
Yicong

Yicong YT500 SMP Series Wifi Projector

Yicong YT500 SMP Series Wifi Projector

 Due to continuous improvement, actual product may differ from the manual. Manual is for reference only.

Safety Reminding

  1. Please read this manual carefully before using.
  2. National standard power cable and power cord with grounding is suggested, so as to ensure stable power supply.
  3. If found projector defected, do not attempt to repair it by yourself. Please contact with your distributor or factory directly.
  4. No looking directly at the lens while projector is working.
  5. This product can only be repaired by professional technical personnel.
  6. No cloth, blanket or any other material that could stock ventilation holes should be placed around the projector while it is working.
  7. No water-proof function for this projector, no such apparatus as vase or cup should be put around the projector.
  8. If don’t use projector for long time, turn off it and cut off the power supply. Use factory original foam and other shockproof material for transport.
  9. It’s a normal phenomenon that there may come out hot air or odor from the vent during using.
    Original mobile data cable suggest to used for wired connection. And Original mobile charger suggest to be used for charging.


Remarks:

The original factory provides one-year warranty, please consult the agent for more warranty information.

Product Details

Product Details
Product Details

Interfaces Functions:

  1. USB
  2. IR Input
  3. Earphone
  4. 12V IN
  5. 5V IN
  6. Input
  7. ESC
  8. Right
  9. OK
  10. Left
  11. Power key
  12. Focus
  13. Lens
  14. Tripod Hole

Remote control

Remote Control

  1. Mute
  2. Power/off
  3. La›t/FB
  4. Play/Pau›e
  5. Ne×t/FF
  6. UP
  7. 0K
  8. Left
  9. Right
  10. Down
  11. Menu
  12. EGC
  13. Vol –
  14. Vol +
  15. lnput

Note: Remote should be target at the IR receiver

Operation Instructions

power on/off

Power supply choose

1.5V/12V Power supply
Use Power bank or cellphone power adapter outlet to connect with Micro USB(as Pic.1),switch on power bank, projector enter into standby status.

Operation:

  1. Button conrol
    Long press power button(Pic.2) to turn on/off projector while porjector is in standby status.

  2. Remote control
    Press power on/off key(Pic.3) on remote to turn on/ turn off projector while projector is in standby status.

Focus

Put the projector with lens vertical to the wall or screen, turn on the projector and then adjust focus adjusting handle (As Pic.4) until the picture is clear.

Input Illustration

Insert USB card to related place as pic 5 shows. Select relevant icon and enter into the submenu.
Movie for video files, Photo for picture files, Music for audio files, E-book for TXT files And press OK to display.

Support Formats

Multimedia Audio MP3/APE/OGG/AAC/FLAC/ATRA
Photo JPEG/BMP/PNG/GIF
Video MKV/AVI/MOV/MP4/TS/ASF/FLV/PMP/MPG/VOB/WMV
E-book TXT

3. Earphone Connection
Connection 3.tmm earphone port with outer audio devices as below pic.

Earphone Connection

Android Wired Connection

  1. Choose “phone screen”

  2. Choose “Wired screen”

  3. Use original mobile data cable insert to USB port on projector

  4. Click “View” to download app.

  5. Click “Download”

  6. Click “Install”

  7. Click “Open”

  8. Click “Ok”

  9. Click “Allow”

  10. Click “ok”

  11. Click “Open”

  12. After finish, if some part of smart phone model no. not Synchronized successfully. Pls go to next step cooperation.
    Android Wired Connection

  13. Unplug USB cable to reinsert to connect it.

  14. Click “OK”

  15. Click “Allow”

  16. Done
    Android Wired Connection

When android phone wired with projector in the firs time. The solution to the problem of not popping up the download prompt window.

  1. Choose “phone screen”

  2. Choose “Wired screen”

  3. Use original mobile data cable insert to USB port on projector

  4. No prompt to download after connection.

  5. Click “Setting”

  6. Click “Developer Options”

  7. Click “Click “Select USB configuration”

  8. Choose “MIDI”

  9. Click “VIEW” after poppoing up a screencap

  10. Complete the wirecast function setting according to “Android mobile phone wired connection operations steps” on page p9-p14.

IOS Wired Connection

  1. Choose “phone screen”

  2. Choose :Wired screen”

  3. Use original mobile data cable insert to USB port on projector

  4. Click “Trust”

  5. Put mobile password

  6. Done
    IOS Wired Connection

Android Wireless Connection

  1. Choose “WiFi”

  2. Locate and open the network button

  3. Choose “phone screen”

  4. Choose “Wireless screen”

  5. Choose Wireless Connection

  6. Choose “HccastFEDD3C_mira”

Android Wireless Connection

Airplay for IOS

  1. Choose “phone screen”

  2. Choose “Wireless screen”

  3. Come into iPhone screen mirroring interface

  4. Choose “screen mirroring” in iPhone setting

  5. Search select device in screen mirroring to connect it

  6. Airpaly is done
    Airplay for IOS

Wireless connection (DLNA function)

  1. Choose “WiFi”

  2. Search wifi to connect with it

  3. Enter your password and connect

  4. Enter into mobile setting

  5. Connect with same wifi as projector

  6. Open the video player

  7. Choose TV mark in play video

  8. Find right device to connect

  9. Wireless connection is done

After wireless projection is successful, exiting the mobile app does not affect the display

Product details

Image system TFT LCD Color 16.7M
Life 30000Hours Contrast 3000:1
Resolution 320*240 Max Resolution 1920*1080
Lamp LED Power Supply 12V 2A / 5V 2A
Power Consumpution ****

24 W

| Operation| Manual
Lens| Multichip lens| Projection Size| 16~100inches
Projection Dist| 0.5~4.0m| N.W| 250 g
Product Size| 110‡90‡ 0mm| Speaker| 4Ω2W
Aspect Ratio| 16:9 / 4:3| Output| Headphone
Input| USB| |

Product View

Warranty Card

Phone|
---|---
Name|
Date of purchase|
Vendor name|
Mode|
Commodity no|
Credential number|
Seller’s Phone|

Warranty Terms

  1. 1.When a consumer purchases a product, the sales entity will complete the warranty card information.
    Incomplete or altered warranty card information No warranty is granted.

  2. The product enjoys one year free warranty from the date of purchase. Maintenance for more than one year will be charged for maintenance;

  3. When the product is warranted,the warranty card and proof of purchase should be provided to the maintenance unit (the credential is not valid);

  4. The following conditions do not enjoy the free
    Warranty service during the warranty period:

  5. Failure or damage caused by improper installation, use and improper storage;

  6. Failure or damage caused by unauthorized disassembly and repair;

  7. Due to force majeure (flood, fire, earthquake, lightning, grid failure and other force majeure factors) Barrier or damage.

FCC Warning Statement

Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.
This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation.
This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications.
However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

  • Reorient or relocate the receiving antenna.
  • Increase the separation between the equipment and receiver.
  • Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
  • Consult the dealer or an experienced radio/TV technician for help.

This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions:

  1. This device may not cause harmful interference, and
  2. this device must accept any interference received, including interference that may cause undesired operation.

RF Exposure Statement
To maintain compliance with FCC’s RF Exposure guidelines, This equipment should be installed and operated with minimum distance of 20cm the radiator your body. This device and its antenna(s) must not be co-located or operation in conjunction with any other antenna or transmitter.

Read User Manual Online (PDF format)

Loading......

Download This Manual (PDF format)

Download this manual  >>

Related Manuals