RYOBI RLT4125 Electric Grass Trimmer Edger Instruction Manual

: May 15, 2024
: RYOBI

RYOBI RLT4125 Electric Grass Trimmer Edger

INSTRUCTION MANUAL

Model: RLT4125

The highest priorities in the design of the electric lawn/edge trimmer you purchased were safety, efficiency and reliability.

DESTINY

The electric lawn/edge trimmer is intended for outdoor use only and by the operator in a standing position.
The product is intended for cutting grass, light weeds and any similar plants at ground level. When pruning to height, the cutting plane should be approximately parallel to the ground, and when shaping the vertical plane of the bushes, approximately vertical.

The device should not be used to trim hedges, bushes or other plants when the cutting plane is not parallel to the ground.
You must not use the product for any purpose not specified above.

GENERAL SAFETY WARNINGS

WARNING

Appropriate safety precautions must be followed when using this device. To ensure the safety of yourself and other people, please read this manual before using the device. Please keep these instructions for future reference.

WARNING

This product is not intended for use by children or persons with reduced physical, mental or sensory capabilities. Make sure that children do not play with the product.

WARNING

Some regions have laws restricting the use of the product. Information on this can be obtained from local offices.

TRAINING

Never allow children or anyone unfamiliar with these instructions to operate this product. Local regulations may limit the age of the operator.
Read all instructions carefully. Become familiar with the control devices and the principles of proper operation of the product.
Bystanders, children and animals must be kept at least 15 meters away from the work area. If another person is in the area, stop the product.
Never use the product when you are tired or under the influence of alcohol, drugs or alcohol medicines.
Please remember that the operator or user is responsible for causing an accident or endangering the safety of persons and property.

SAFETY RULES FOR OPERATING ELECTRICAL DEVICES

The plug must fit into the electrical outlet. You must not modify the plugins in any way. Do not use any adapters to connect devices with a grounded power cord. Using original plugs and matching power sockets reduces the risk of electric shock.
Avoid the possibility of accidentally starting the device. Before connecting the product to a power source, always check that the switch is in the Off position. Do not carry the product while it is plugged in with your finger on the switch.
Avoid body contact with surfaces that are grounded or connected to the neutral pole, e.g. pipes, heating and cooling installations. Body contact with ground or ground increases the risk of electric shock.
Do not use the product when there is a risk of thunderstorms or lightning.
Do not expose this product to rain or water. Water entering the device poses a risk of electric shock.
The device should be powered by a residual current device (RCD) with a tripping current of no more than 30 mA.
Before each use, check the power cord for damage. If you notice any signs of damage, take the device to an authorized service center for repair. Always unwind the coiled power cord when in use as coiled cords may overheat.
If it is necessary to use an extension cord, make sure that it is suitable for outdoor use and that it has the parameters (power of the connected devices) to enable the connection of the product. The extension cord should be marked “H05RN-F” or “H05 VV F”. Check for damage before each use.
Always unwind it during use as the coiled cables may overheat. Do not repair damaged extension cords. They should be replaced with a product with the same parameters.
Do not use the product if the power cord is damaged or worn.
If the power cord or extension cord is damaged during operation, the device should be immediately disconnected from the power supply.
Do not touch electrical cables while the device is connected to the power supply.
Make sure that the power cord is placed in such a way that it cannot be damaged by cutting, cannot be stepped on, snagged or damaged or otherwise exposed way.
Do not lift or carry the product by the cord electric.
Keep the power cord away from sources of heat and oil and sharp edges.
Make sure the product is powered on appropriate voltage. The supply voltage of this product is indicated on the nameplate. NO connect devices to AC power voltage other than the rated voltage.
Make sure the switch is in the position Off before disconnecting the device from the power supply.

PREPARATION

Full eye and ear protection should be worn while product handling. If you work in a place where there is a risk of falling objects, please do so wear a helmet.
Hearing protection may limit ability operator to hear warning sounds.
You should pay close attention to potential ones hazards in the work area.
Wear thick, long pants, high boots and gloves.
Do not wear loose clothing, shorts, jewelry and not to walk barefoot.
Long hair should be tied up to keep it in place above the shoulders and not be caught by them machine.
Before use and after any impact check that no parts are damaged.
Broken switch or other damaged or the worn part must be properly repaired or replaced by an authorized service point.
Make sure the cutting head is properly positioned installed and securely fastened.
Never use the product if any the cover, deflector or handle are not properly and properly fixed.
Consider the environmental conditions in which they are intended work to be performed. They can’t do it on the job site there are wires, wires, sticks, stones or debris, because if hit by a knife they can be rejected.

STRING TRIMMER (FOR EDGES) – SAFETY WARNINGS

The product should only be operated under light daylight or with appropriate artificial lighting.
Avoid using the device on wet grass.
Do not walk backwards when using the product.
Stand steady and maintain balance. Don’t reach too far far. Reaching too far may result in loss of balance.
Always stand firmly on slopes. You should walk while working, do not run.
Bystanders, children and animals must be found at least 15 meters away from the site work. If there is another person in the area, stop the product.
The cutting head must be below the belt line.
Do not use the product with damaged or missing covers covers installed.
The fishing line must not be replaced with a metal cable.
Keep hands and feet away from cutting elements throughout the work, and especially during starting the engine.
Note: The blades continue to rotate after the engine is turned off.
Pay attention to objects rejected by cutting elements. Before starting work you should remove small stones, debris and other foreign objects from the workplace. Wires or strings may remain caught by the cutting device.
Turn off the power and remove the plug from the socket network before doing the following:
servicing
leaving the product unattended
cleaning the product or removing a blocked one object
replacement of accessories
damage control after object impact
damage control in case the product falls into unusual vibrations
maintenance
Small blade attached to the mowing guard allows you to cut freshly unrolled fishing line appropriate length to ensure optimal work. It is very sharp. You should not touch it especially when cleaning the tool.
Keep vents clear free from contamination.
Make sure the cutting head is properly positioned installed and securely fastened.
Make sure that all safety features, covers and handles are properly and securely fitted fixed.
Do not modify the product in any way; this may result in a greater risk of personal injury operator or other persons.
Only use the manufacturer’s cutting line.
Do not use any other cutting accessories.
In the event of an accident or breakdown, proceed immediately turn off the device and disconnect it from the network. You shouldn’t turn the product on again until it is fully powered checked by an authorized service center.

TRANSPORT AND STORAGE

Before storing or transporting the product: stop it and wait until it cools down. Before putting it away devices to their storage location, please store them disconnect from the power supply and roll up the power cord.
Remove any contamination from the product. Belongs
store the device in a cool, dry and a well-ventilated place that is inaccessible for children. Don’t hide it near the elements corrosive substances, such as garden chemicals or de-icing salts. Do not store outdoors.
When transporting the product, it must be secured it from moving or falling so that it does not cause personal injury or damage to the device.

MAINTENANCE

WARNING
Only original spare parts should be used, accessories and attachments from the manufacturer. Otherwise Otherwise, it may lead to personal injury and poor performance and to void the warranty.

WARNING
Servicing requires exceptional care and knowledge.
It may only be performed by a qualified person service personnel. Product servicing is required have it done by an authorized service representative. Down repairs, use only identical replacements.

Turn off and disconnect from the power source before undertaking maintenance or cleaning work.
You can perform adjustment and repair activities described in this user manual. For others repairs, please contact an authorized person service point.
Only nylon should be used for replacement continuous fishing line with the diameter given in the specification table in this manual.
After pulling out a new cutting line, always before When you turn on the device, set it to normal working position.
After each use, clean the product with a soft, dry cloth. Any damaged part should be repaired properly repaired or replaced by an authorized service center service point.
Regularly check that all nuts, screws and bolts are securely tightened to ensure that the product is in a safe condition.

Even if the product is used as directed, it is still not possible to eliminate specific ones risk factors. The following hazards may occur when using the device and the operator should pay particular attention to the following points:

Body injuries caused by vibration.
– Hold the product by the appropriate handles and follow time recommendations work and exposure.
Hearing damage caused by exposure to noise.
– Ear protection should be worn and limited exposure level.
There is a risk of being rejected objects.
– Wear eye protection at all times.

RISK MITIGATION

There have been cases of the symptom being triggered in some people Raynaud’s caused by product vibration.
Typical symptoms include tingling, numbness and fading fingers, usually visible after exposure cold. It is believed that hereditary factors, exposure exposed to cold and moisture, diet, smoking and adopted customs contribute to the development of these symptoms. There are countermeasures he can take tool operator to reduce the effect of vibration:

Take care of your own warmth in low temperatures body by wearing appropriate clothing. While When handling the product, wear gloves to protect your hands and my wrists were warm. Low temperatures are known are the main cause of Raynaud’s phenomenon.
Exercise during breaks at work improving blood circulation…
Take frequent breaks while working. To limit exposure during the day.

If you experience any of the above symptoms, discontinue use immediately this device and contact your doctor.

WARNING

Prolonged use of the tool may cause personal injury or worsen health problems. IN when using the tool for a long time remember to take regular breaks.

KNOW YOUR PRODUCT

See page 104.
1. Cable hook
2. Hook the power cord
3. Edge trim button
4. Front handle adjustment button
5. Spool cover
6. Spool
7. Headband
8. Line trimming blade
9. Cutting line
10. Protective cover
11. Down tube
12. Extension adjuster
13. Top tube
14. Front handle
15. On/off switch
16. Rear handle

PRODUCT SYMBOLS

You should read and understand all of them instructions before operating product and comply with all warnings and instructions regarding safety.

Symbol	Description
Wear eye protection
Hearing protection should be worn.
Should not be installed in the product metal blades.
Do not expose the device to direct sunlight rain or use in places o high

humidity.
| Before starting the activity maintenance or if the cable is damaged, cut or tangled, disconnect the plug from the source power supply.
| Beware of rejected items. All bystanders, a especially children and animals, they must be at least a distance away 15 meters from the workplace.
|
| Keep your hands away from the blades.
| Class II tool, double insulation Used electrical products should not be used be disposed of with household waste.
| Please recycle in appropriate places. Information about proper recycling methods can be obtained from your local authority or seller.
| This tool meets everyone’s requirements rationing standards of the EU country in which it was purchased.
| EurAsian conformity mark
| Ukrainian compliance mark 96
---|---
| Maximum noise levelis 96 dB.

The following symbols and the names given to them allow explain the different levels of risk associated with use this tool.

DANGER

It points to a real threat that can cause death or serious injury if will not escape this danger.

WARNING
Indicates a potential threat that may cause death or serious injury if will not escape this danger.

ATTENTION
Indicates a potential threat that may cause minor or more serious injury, if this danger is not avoided.

ATTENTION
No warning symbol
A situation that may result in property damage.

SYMBOLS IN THIS MANUAL

| Plug into the power socket
---|---
| Unplug from power socket
| Parts or accessories for sale separately
| Explanation
| Warning!

WHAT’S IN THE BOX

WHAT'S IN THE BOX

OVERVIEW

Overview

1. Cable hook
2. Hook the power cord
3. Edge trim button
4. Front handle adjustment button
5. Spool cover
6. Spool
7. Headband
8. Line trimming blade
9. Cutting line
10. Protective cover
11. Down tube
12. Extension adjuster
13. Top tube
14. Front handle
15. On/off switch
16. Rear handle

ASSEMBLE

Electric Grass Trimmer Edger

USING

Electric Grass Trimmer Edger

CHARGING

Electric Grass Trimmer Edger

CLEANING

Electric Grass Trimmer Edger

Product Specifications:

Model: RLT4125
Purpose: Electric grass trimmer/edger
Priority: Safety, efficiency, and reliability

Frequently Asked Questions (FAQ):

Q: Can children use this product?

A: This product is not intended for use by children or individuals with limited physical, mental, or sensory abilities.
Ensure that children do not play with the product.

Q: What should I do if I notice any damage to the product?

A: If you notice any damage to the product, such as a damaged power cord or switch, do not use it. Contact an authorized service center for repair or replacement.