LSEPOUM B0BLNWQN4T Caged Ceiling Fan with Light Instruction Manual
- May 15, 2024
- LSEPOUM
Table of Contents
LSEPOUM B0BLNWQN4T Caged Ceiling Fan with Light Instruction Manual
The first step in the installation of the product is to check whether there is fallen off or poor contact of the wireline, then check the electricity and remote control of the product on the ground. If everything is ok, install the product on the ceiling.
-
Adults, children, and the elderly should not touch the fan blades when the fan is powered on or energized.
Please keep a safe distance and height from the fan. -
If the fan has a burning odor during operation, please tum off the power to prevent leakage accidents.
■ Kind reminder
- If the remote control fails to control the light and fan, please check whether the battery is installed correctly or replace the battery and test again! Then check whether there is fallen off or poor contact of the wireline inside the base!
- If the remote control suddenly cannot be used, please check the code first (refer to the manual of the remote control or contact online customer service by email)! If the problem still exists after checking the code, please contact the Seller to send a new controller accessories.
-
Maintenance and cleaning
After the product has been used for a period of time, it can be cleaned with a cloth dipped in detergent, and then wiped with a dry cloth. -
Warning:
If it is necessary to remove the fan blade for cleaning, professional electrician must be there to assist the installation so as to prevent falling injury caused by unstable installation of the blade! -
Kind reminder
If you do not use the fan or turn on and off the light for a long time, please energize on the product regularly to extend the service life of the product!
■ Important safety instructions
SAFETY RULES
- To reduce the risk of electric shock, tum off the electricity to the fan at the main fuse box or circuit panel before beginning.
- All wiring must be in accordance with the local electrical codes or National Electrical Code. Electrical installation should be performed by a qualified licensed electrician.
- To avoid personal injury, the use of gloves may be necessary while handling fan parts with sharp edges.
- Make sure the installation site you choose allows clear space for the blades to rotate and at least 6.5 feet of clearance between the floor and the fan blade tips.
- WARNING: To reduce the risk of fire, electric shock, or personal injury, mount fan only to an outlet box marked acceptable for fan support and use mounting screws provided with the outlet box. Most outlet boxes commonly used for the support of lighting fixtures are not acceptable for fan support and may need to be replaced. Consult a qualified electrician if in doubt.
- The outlet box and ceiling support structure must be securely mounted and capable of supporting at least IO KGS.
- To avoid personal injury or damage to the fan and other items, be cautious when working around or cleaning the fan.
- Do not use water or detergents when cleaning the fan or fan blades. A dry dust cloth or lightly dampened cloth will be suitable for most cleaning.
- After making electrical connections, spliced conductors should be turned upward and pushed carefully up into the outlet box. The wires should be spread apart with the grounded conductor and the equipment-grounding conductor on one side of the outlet box.
- Electrical diagrams are for reference only.
- The fan is more suitable for indoor use.
TOOLS REQUIRED
PRODUCT OVERVIEW
Unpack your fan and check the contents. You should have the followings:
Note: Please check the attachment first
The accessory bag is usually placed in the hole in the foam corner of the
carton
INSTALLATION DIAGRAM
Circuit Diagram
Live Wire (Black)
Neutral Wire (White)
Earth Wire (Yellow)
Note: The black wire and white wire can be interchangeably connected to the
junction box which does not affect the performance of fan/light. And it is
also safe.
Remote control available only when fan/light powered on from wall switch.
Instructions for use of the remote control
-
Remote control clear code setting:
Turn the power back on, press and hold the “Stop” button for 5 seconds, the indicator light stops flashing, and the code clearing is completed. -
Remote control pairing setting:
Turn the power back on and hold the “2H” button within 3 seconds.
When the indicator light stops flashing, the pairing code is completed.
7*24 hours service
if you encounter any difficulties during use, please contact our after-sales
service personnel in time.
we will answer you as soon as possible.
Thank you for purchasing and using the “LSEPOUM” brand of Cage Ceiling Fan
Lights,
If you encounter any problems during use, please contact customer service in
time, and we have professional personnel to answer for you.
If you like this series of ceiling fan lights very much, please leave us your
valuable suggestions and share your happiness with more people.
LSEPOUM wish you a good mood every day Look forward to your patronage again
LSEPOUM
CAGED CEILING FAN ‘WITH LIGHT
The content of this manual has been checked carefully! If you find any misprints or if you have any misunderstanding of the content, please contact us by email! Any technical improvements about the product will be included in the new edition of the manual without further notice! If the appearance or color of the product is found changed, please refer to the object in kind! Thank you!