Roykaw 0356 Golf Cart Bag Holder Instruction Manual
- May 15, 2024
- Roykaw
Table of Contents
NEW GENERATION GOLF CART BAG HOLDEF
INSTALLATION INSTRUCTION
Packing List
| Parts List | Installation Tools | |
|---|---|---|
| Name | Qty | Name |
| M8*45 Bolts | 8 | M6*20 Bolts |
| M8*50 Bolts | 4 | M6*30 Bolts |
| M8 Nuts | 12 | M6 Nuts |
| M8 Washer | 24 | M6 Washer |
-
base
-
trapezoidal iron block
-
N-shaped bracket
-
L-shaped bracket
(For wider type rear seat safety grab bar only) -
column bracket
-
bottom golf bag fixing bracket
-
upper golf bag fixing bracket
Installation Tools
|
---|---
3/8”(10mm)2| 1/2″(13mm)2
Installation Instructions
-
Attach the trapezoidal iron block to the base, reference the figure 1 and figure 2. (Use 4 pieces M8*45 bolts and M8 nuts).
-
Insert the column bracket into the trapezoidal iron slot, reference the figure 3. (Use 2 pieces M8*45 bolts and M8 nuts).
-
Attach the N-shaped bracket to trapezoidal iron block, reference the figure 4 and figure 5 (Use 4 pieces M8*50 bolts and M8 nuts).
-
Attach the bottom golf bag fixing bracket to the column bracket, reference the figure 6 and figure 7 ( Use 2 pieces M8*45 bolts and M8 nuts).
-
Note: Judge the type of the rear seat safety grab bar, Please reference figure 8 and figure 9 carefully. If your rear seat safety grab bar is widening type, need use 3 pieces L-shaped bracket. If not, no need.
-
Normal type rear seat safety grab bar installation.
Attach the upper golf bag fixing bracket to the column bracket, reference the figure 10 and figure 11( Use 2 pieces M6*20 bolts and M6 nuts).
-
Widening type rear seat safety grab bar installation
-
Attach the upper golf bag fixing bracket and L-shaped bracket to the column bracket, reference the figure 12 and figure 13, ( Use 2 pieces M6*30 bolts and M6 nuts).
-
Attach 2 pieces L-shaped bracket to the both sides of bottom golf bag fixing bracket ( reference the figure 14). (Use 4 pieces M6*20 bolts and M6 nuts).
Note: DON’T tighten the nut for now and keep the 2 pieces L-shaped bracket is loose (reference the figure 15). -
Hang golf bag holder to the Normal type rear seat safety grab bar, reference the figure 16 and figure 17.
-
Hang golf bag holder to the Widening type rear seat safety grab bar ( reference the figure 18 ); and then tighten the nuts of both sides of bottom golf bag fixing bracket. ( reference the figure 19).
-
Attach your golf bag to the golf bag holder, reference the figure 20 and figure 21.
Enjoy Golf & Enjoy Life