ACC-STAND 51634 Accu Stand Event Facade II User Manual

ACC-STAND 51634 Accu Stand Event Facade II

Specifications

• Zippered Transport Carrying Bag (x1)
• Metal Top Section Frames (x4)
• Metal Bottom Section Frames (x4)
• White Fabric/Scrim Panels (x4)
• Black Fabric/Scrim Panels (x4)

Product Usage Instructions

Installation

1. Unzip the transport carrying bag and lay out all components.
2. Connect the metal top and bottom section frames to form the facade structure.
3. Attach the white and black fabric/scrim panels to the frame securely.

Cleaning

1. Gently wipe down the fabric panels with a damp cloth if needed.
2. Ensure the metal frames are free from dust and dirt for longevity.

Dimensional Drawings
Refer to the provided dimensional drawings for accurate setup and positioning.

GENERAL INFORMATION

INTRODUCTION
This device is a great solution to professionally conceal your DJ equipment and create an elegant professional look at the same time. Perfect for anyone looking for a lightweight, portable, and fast set-up facade to enhance their image. This device includes a lightweight metal frame and fabric/scrim panel set. The stretchable fabric/scrim panels are easily removable for cleaning or can be interchanged for different black and white color panel combinations. Transportation and storage is also simple with the included zippered carry bag. No tools are required to set-up or break-down the device, and facade panels break down into individual pieces for easy transport.

UNPACKING
Carefully check the shipping carton for damage that may have occurred during shipping. If the carton is damaged, carefully inspect the device for damage, and be sure all accessories necessary to install and operate the device have arrived intact. In the event that damage has been found or parts are missing, please contact our customer support team for further instructions. Please do not return this device to your dealer without first contacting customer support. Please do not discard the shipping carton in the trash. Please recycle whenever possible.

BOX CONTENTS
Zippered Transport Carrying Bag (x1)
Metal Top Section Frames (x4)
Metal Bottom Section Frames (x4)
White Fabric/Scrim Panels (x4)
Black Fabric/Scrim Panels (x4)

CUSTOMER SUPPORT
Contact ADJ Service for any product-related service and support needs.
Also visit forums.adj.com with questions, comments, or suggestions.
ADJ SERVICE USA – Monday – Friday 8:00 am to 4:30 pm PST
323-582-2650 |

Fax: 323-832-2941 | support@adj.com
ADJ SERVICE EUROPE – Monday – Friday 08:30 to 17:00 CET
+31 45 546 85 60 |

Fax: +31 45 546 85 96 | support@adj.eu
REPLACEMENT PARTS please visit parts.adj.com

IMPORTANT NOTICE
THIS UNIT CONTAINS NO USER-SERVICEABLE COMPONENTS. DO NOT ATTEMPT ANY REPAIRS YOURSELF, AS DOING SO WILL VOID YOUR MANUFACTURER’S WARRANTY. DAMAGES RESULTING FROM MODIFICATIONS TO THIS DEVICE AND/OR THE DISREGARD OF SAFETY INSTRUCTIONS AND GUIDELINES IN THIS MANUAL VOID THE MANUFACTURER’S WARRANTY AND ARE NOT SUBJECT TO WARRANTY CLAIMS AND/OR REPAIRS.

WARRANTY

LIMITED WARRANTY (USA ONLY)

• A. ADJ Products, LLC hereby warrants, to the original purchaser, ADJ Products, LLC products to be free of manufacturing defects in material and workmanship for a prescribed period from the date of purchase (see specific warranty period on reverse). This warranty shall be valid only if the product is purchased within the United States of America, including possessions and territories. It is the owner’s responsibility to establish the date and place of purchase by acceptable evidence, at the time service is sought.
• B. For warranty service, you must obtain a Return Authorization number (RA#) before sending back the product contact ADJ Products, LLC Service Department at 800-322-6337. Send the product only to the ADJ Products, LLC factory. All shipping charges must be pre-paid. If the requested repairs or service (including parts replacement) are within the terms of this warranty, ADJ Products, LLC will pay return shipping charges only to a designated point within the United States. If the entire instrument is sent, it must be shipped in its original package. No accessories should be shipped with the product. If any accessories are shipped with the product, ADJ Products, LLC shall have no liability whatsoever for loss of or damage to any such accessories, or for the safe return thereof.
• C. This warranty is void if the serial number has been altered or removed; if the product is modified in any manner which ADJ Products, LLC concludes, after inspection, affects the reliability of the product, if the product has been repaired or service by anyone other than ADJ Products, LLC factory unless prior written authorization was issued to purchaser by ADJ Products, LLC; if the product is damaged because not properly maintained as outlined in the instruction manual.
• D. This is not a service contract, and this warranty does not include maintenance, cleaning, or periodic check up. During the period specified above, ADJ Products, LLC will replace defective parts at its expense with new or refurbished parts and will absorb all expenses for warranty service and repair labor because of defects in material or workmanship. The sole responsibility of ADJ Products, LLC under this warranty shall be limited to the repair of the product, or replacement thereof, including parts, at the sole discretion of ADJ Products, LLC. All products covered by this warranty were manufactured after August 15, 2012, and bear identifying marks to that effect.
• E. ADJ Products, LLC reserves the right to make changes in design and/or improvements upon its products without any obligation to include these changes in any products theretofore manufactured.
• F. No warranty, whether expressed or implied, is given or made concerning any accessory supplied with the products described above. Except to the extent prohibited by applicable law, all implied warranties made by ADJ Products, LLC in connection with this product, including warranties of merchantability or fitness, are limited in duration to the warranty period set forth above. And no warranties, whether expressed or implied, including warranties of merchantability or fitness, shall apply to this product after said period has expired. The consumer’s and/or Dealer’s sole remedy shall be such repair or replacement as is expressly provided above; and under no circumstances shall ADJ Products, LLC be liable for any loss or damage, direct or consequential, arising out of the use of, or inability to use, this product.
• G. This warranty is the only written warranty applicable to ADJ Products, LLC Products and supersedes all prior warranties and written descriptions of warranty terms and conditions heretofore published.

LIMITED WARRANTY PERIODS

• Non L.E.D. Lighting Products = 1-year (365 days) Limited Warranty (Such as Special Effect Lighting, Intelligent Lighting, UV lighting, Strobes, Fog Machines, Bubble Machines, Mirror Balls, Par Cans, Trussing, Lighting Stands, etc. excluding LED and lamps)
• Laser Products = 1 Year (365 Days) Limited Warranty (excludes laser diodes which have 6 month limited warranty)
• L.E.D. Products = 2-year (730 days) Limited Warranty (excluding batteries which have a 180-day limited warranty)

Note: 2-Year Warranty only applies to purchases within the United States.

• StarTec Series = 1-Year Limited Warranty (excluding batteries which have a 180-day limited warranty)
• ADJ DMX Controllers = 2 Year (730 Days) Limited Warranty

WARRANTY REGISTRATION
This device is covered by a 1 year (365 days) limited warranty. All returned service items, whether under warranty or not, must be freight pre-paid and accompanied by a return authorization (R.A.) number. The R.A. number must be clearly written on the outside of the return package. A brief description of the problem as well as the R.A. number must also be written down on a piece of paper and included in the shipping container. If the unit is under warranty, you must provide a copy of your proof of purchase invoice. Items returned without an R.A. number clearly marked on the outside of the package will be refused and returned at the customer’s expense. You may obtain an R.A. number by contacting customer support.

INSTALLATION

1. Connect top and bottom metal frame sections together by inserting the bottom section securely into the top section, making sure the hook-and-loop strips of both sections are oriented in the same direction. Also make sure that there are no gaps between the two sections. (see images below left and center). Note: The bottom metal frame section has 2 rubber feet.
2. Secure the top and bottom frame sections together by attaching the fabric/scrim color panels to the hook-and-loop strips, starting at the top section and working down towards the bottom section, stretching the fabric/scrim slightly as needed, as shown in the above right image.
3. Repeat steps 1 and 2 for the remaining metal frame sets.
4. Connect the completed facade panels by aligning the top and bottom hinges and inserting both rotation pins into the hinge sleeves, as illustrated below.

CLEANING

To clean the fabric/scrim, remove it from the panel and hand wash in cold water using mild laundry soap. Lay out on flat surface to air dry. If stains are still present, hand wash again and air dry.

• DO NOT TWIST OR WRING OUT SCRIM!
• DO NOT HEAT DRY!
• NEVER USE ALCOHOL, SOLVENTS, OR AMMONIA-BASED CLEANERS!

DIMENSIONAL DRAWINGS

SPECIFICATIONS

• Frames made of strong and lightweight metal
• Detachable hinges and frames – breaks down in half for easier transport and storage
• Includes removable white & black fire retardant scrim
• Includes a carrying bag to protect the frames and scrim during storage and transportation
• Scrim to be washed by hand in cold water and lay flat to dry. Do not twist to avoid deformation.
• Dimensions (LxWxH):
  • Complete Stand: 110.25” x 1” x 47.25” / 2800 x 25.4 x 1200mm
  • Each Panel: 27.5” x 1” x 47.25” / 700 x 25.4 x 1200mm
  • Bag: 49.75” x 29w.5” x 6.25” / 1265 x 750 x 159mm
  • Weight: 36 lbs. / 16.5 kgs.

OPTIONAL ACCESSORIES

Follow us

• facebook.com/adjlighting
• instagram.com/adj_lighting
• youtube.com/adjlighting
• twitter.com/adjlighting

ADJ Products, LLC

• ADDRESS: 6122 S. Eastern Ave. Los Angeles, CA 90040 USA
• Tel.: 323-582-2650
• Fax: 323-725-6100
• Web: www.adj.com 
• E-Mail: info@americandj.com

A.D.J. Supply Europe B.V.

Junostraat 2

• ADDRESS: 6468 EW Kerkrade Niederlande
• Tel.: +31 45 546 85 00
• Fax: +31 45 546 85 99
• Web : www.adj.eu
• E-Mail: support@adj.eu

A.D.J. Supply Europe B.V.
Junostraat 2 6468 EW Kerkrade Niederlande www.adj.eu

References

• Topics | ADJ Forums
• ADJ Lighting (@adj_lighting) • Instagram photos and videos
• ADJ Product Parts - Lighting Online Parts Store
• Home
• Home
• ADJ Supply Europe
• ADJ Supply Europe

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>