Milerong X25 3 Channel Dash Cam Front and Rear Inside FHD Dashcam for Car Instruction Manual

Model: X25

X25 3 Channel Dash Cam Front and Rear Inside FHD Dashcam for Car

Dear Customer,
We are truly grateful for you choosing Milerong! We hope you will enjoy the quality of our products and services.

If you need help, or have any suggestions for improvement, please feel free to contact us. You can contact us through the Amazon platform, and we will have professional technical service personnel to serve and answer you at any time.
Our support team will respond you within 12 hours.
You are an incredibly important customer, and serving you has been an honor.
We may not be the best, but we will always do our best to provide you the best service!

Kind Regards,

Milerong Team

Important Notice

• Please use the car charge and Type-C cable in the package to power this camera; The cable in package is only used as a power cord, can not transfering videos to your computer.

• Before installing the camera, please power on the driving recorder to test whether it can be used normally, including whether the front camera, in-car camera and rear camera display normally. (Please use the car charger to get power from the cigarette  lighter)

• The camera cannot be operated while recording, so press the OK Button to pause recording before making function settings.

• The packaging does not include the Micro SD card.
  Please prepare a high -speed storage SD card, level 10 or higher, no more than 64GB. Please format the card in the camera menu before use. (It is recommended to use 16GB / 32GB card)

• The car camera has a built-in battery as an internal power source for emergency recording. If you want to keep the camera turned on for 24 hours, you need to power it continuously, just connect it to the Hardwire Kit.
  (need to purchase separately)

• Do not install the camera where it may obstruct the driver’s view (including the rearview mirror) or the deployment of the airbag. Be sure the camera lens is clean and there is noting blocking the lens.

• Do not leave the camera in direct sunlight for a long period of time or where the temperature could go above 170°F (75°C).

• We suggest some important function settings for your daily using: G-Sensor level choose” low”, or turn off; loop recording choose “3 minutes”; motion detection choose “OFF” ; parking monitor choose “ON”, security camera for car.

• We suggest you format the SD card monthly to extend its life span.

• See the Frequently Asked Questions section for some other frequently asked questions. If these still don’t solve your problem, drop us a message via the Amazon page, all setup issues are easily resolved and should get you up and running in no time. Rest  assured, we will take 100% responsibility for our products. We just want our customers to be happy and proud of using Milerong Dash Cam!

Camera Overview

1. Flashing While Charging
2. Flashing While Recording
3. Microphone
4. Button Guide Icons
5. Reset
6. Micro SD Card Slot (SD Card need to purchase separately)
7. Type-C Charging Port
8. Mount Connector
9. Rear Camera Port
10. Menu Button / Mode Button
11. Up Navigation Button/ Quickly Turn Off the Night Vision Function Button / Screen Toggle Button /Switching Between Front and Inside Files Button
12. Power Button/ Screensaver Button
13. Down Navigation Button/ Switching Microphone Button/ Switching Between Front and Rear Files Button
14. OK (Confirm) Button/ Record Button
15. Lens
16. Speaker

Screen Icons

Basic Operation

Device Power
The device will be automatically powered on when it’s plugged into a 12V accessory socket or cigarette lighter and receives power (i.e.: when the vehicle is started).
– To turn the device on manually, press and hold the POWER Button until the screen lights up.
– To quickly turn on the Screensaver when the Dashcam is on, use a short press on the POWER Button once. The display screen will go out (however the dashcam will still be running at this time). Use a short press on the power button again and the display  screen will go back on.

Menu Settings
When the dash cam is turned on, you need to press the OK Button to start recording, nd also press the OK Button to stop recording.
– The X25 operates in 3 modes:
Video Recording Mode, Photo Mode and Playback Mode.
These modes also have menus to help you configure re­ cording and taking photos. Long Press the MENU Button to access the mode you want. You can distinguish the different modes by the icons in the upper left corner.
-In all 3 operating mode, you can short press the MENU once to aces the menu settings for that particular mode, and short press twice to display Sywtem Setting Menu.
Press the and Buttons to scroll through the various setup functions and press OK Button to  select. Press Men Betton again to exit/return

Video Recording Mode
After connecting the car charger and turning on the power, the camera will enter the screen, and you can choose to set the function or record. The blue LED lights op and the red dot in the upper left corner flashes to indicate recording. Press the OK Button to  stop recording in stand mode, or to restart recording
(Standby mode means that there ls no ongoing operations)

In Video Recording Mode press the “MENU” Button to enter the setting menu of video recording mode.

• Resolution: 1080FHD (19201080)/ 720P (1280720)/ VGA/ 720P (1280*720)/ VGA 3 Channel Dash Cam–Front & Rear & Inside

• Loop Recording: This function allows you to set video file length to 1/3/5 minutes, select a value to activate loop recording, so when storage fills up, it will automatically loop back to the earliest file and record over it. (Please note: Locked video files cannot  be overwritten, you need to clear these locked files by manually deleting or formatting them)

• WDR(Wide Dynamic Range): After turning on this function, the camera will automatically fine-tune the exposure to maximize the clarity of the video when encountering low light or backlight conditions.

• Exposure: Adjustable exposure value, used to change the image brightness. (+3.0)

• Microphone: Turn on/off audio recording in the video.
  You can achieve it in two ways, manually turn it on/off through the menu or short press the down button to quickly turn it on/off.

• Date Stamp: Enable/Disable the date and time marks in video files. (Recommended to turn on)

• Motion Detection: This function can automatically start recording in standby mode when a moving object is detected in front of the camera.

• G-Sensor (Gravity Sensor): G-sensor will detect significant or sudden shock and movement then automatically locks current recording from loop recording, Off/Low/Medium/High sensitivity available.

• Parking Monitor: It is used to protect your car after parking, with this function on, after you park the car and the camera powers off, it will stay in standby mode, when the camera detects shocking, it will automatically turn on and shoot 31 seconds of video,  then then shut down automatically.

(It is recommended to turn off the motion detection and parking monitor functions during driving, otherwise it will automatically lock multiple files causing the memory card to be full)

Photo Taking Mode

To take a photo, stop video recording and long press the Menu Button to switch to photo mode. (Or long press the menu button twice to enter the photo mode.)

Press the OK Button to take a photo.

In Photo Taking Mode press the “MENU” Button to enter the setting menu of photo mode.

• Capture Mode: Sigle shot / 2s Delay / 5s Delay / 10s Delay
• Resolution: Set the photo resolution. (Optional: 12M 40323024/10M 36482736 /8M 32642448 / 5M 25921944/ 3M 20481536/2MHD 19201080/ 1.3M 1280*960/VAG)
• Continuous shooting: Off /On (After opening, you can take 3 photos in a row)
• Quality: Defines the quality of image you capture.(Optional: Fine / Normal / Economy)
• Sharpness: Defines the clarity of details in the photos.(Optional: Strong / Normal / Soft)
• White Balance: Establishes the condition to capture an image based on the option given. (Optional: Auto / Daylight / Cloudy / Tungsten / Fluorescent)
• Color: Normal / Black and White / Sepia
• ISO: Auto / 100 / 200 / 400
• Exposure: Adjust exposure value to adjust the brightness of the photo
• Anti-shaking: Off / On
• Date Stamp: Enable/Disablethe date and time marks on photo.

Playback of videos can be done on the device or a computer.
To review a photo / video on the device, press and hold the MENU Button twice to switch to Playback Mode. Use the and Buttons to toggle to the desired video. Press the OK Button to play.
In Playback Mode, Long press the Button to switch be- tween front and inside files. During playback use the OK (pause), (rewind) and (fast forward) Buttons to control the video playback.
In Playback Mode press the “MENU” Button to enter the setting menu of playback mode.

• Delete: Delete Current / Delete All
• Protection: Lock One / Unlock One / Lock All / Unlock All

To delete a photo / video, stop video recording and toggle to the Playback Mode and toggle through the videos and photos to the one you want to delete.

• To playback a photo / video on the computer, use an SD card adapter, or use the USB cable to connect the device and the computer directly.

• To playback a video using an SD card adapter, remove the memory card and insert it into an SD card adapter.
  Place the adapter in the computer.

On the computer, navigate to device drive, open the folder “DCIM”, there are 3 subfolders “FRONT”, “BACK” and “INSIDE”. Select the video to playback.

• To playback a video using USB cable (USB cable for reading data on a computer, not included in the package ) connect the USB Cable to the device and the computer.
  After the device powers up, press the OK Button to select “Mass Storage”.

System Setting Menu
Press Menu Button twice to access System Setting Menu in any mode. The icon is highlighted in the upper left corner.

• Screen Saver: In order to guarantee safe driving, not to be effected by the light of recorder, you can set the screen saver to shut off the display, press any key to turn it back on. Set the time to automatically turn off the LCD display after no operation.  (Optional: Off / 30 Seconds / 1 Minute / 2 Minutes / Quickly turn on the screen saver by tapping the power button)
• Auto Power Off: Set the time for the camera to automatic-ally power to save energy, after the camera is idle for set time, it will power off. (Optional: Off / 3 Minute / 5 Minutes / 10 Minutes)
• Frequency: 50Hz / 60Hz
• Key Sound: Off / On
• Language: Chinese / Deutsch / English / Japanese / English/ Korean / French
• Date/Time: Change the time and date by using the and , then press OK Button to confirm.
• Fill Light: Off / On / Auto
• Boot Sound: Off / On (Power-on and power-off sounds)
• Format: Format the Micro SD Card.
• Default Setting: Reset all settings back to factory default.
• Version: FH-57xx-20220824

Button Tips

Menu Button:

1. Long press the Menu Button to switch between 3 modes (Video Recording Mode, Photo Taking Mode, Playback Mode0.
2. After entering the mode setting, short press the Menu Button to enter the System Setting Menu, and press the Menu Button again to return to the screen.
3. During the recording process, short press the Menu Button is one-key locking, and pressing again is one-key unlocking.

Button

1. SHORT Press the Button to switch the display screen mode, there are 6 modes:

1. The front camera is displayed at the bottom of the screen, and the cabin camera is displayed in the upper right corner of the screen.
2. The front camera is displayed at the bottom of the screen, and the rear camera is displayed on the top right of the screen.
3. The rear camera is displayed at the bottom of the screen, and the cabin camera is displayed on the top right of the screen.
4. Fill the full screen on the front camera screen.
5. Fill the full screen of the cabin camera screen.
6. The full screen is filled with the screen screen.

2. Long press Button to turn on or off fill light.

Button

1. During recording or in standby mode, short press Button to turn on or off the microphone.
2. In playback mode, long press the Button to enter the photo or video folder of the front, inside and rear cameras, then short press the Button or Buttonto switch the photos or videos recorded by the camera.

Installation

Step 1 : Insert the Memory Card

Before installation, please check the camera’s normal fun ction, and male sure you are using a high speed Micro SD card (speed Class 10 or above.), and format the card  before recording.

Gently push the memory card in until you hear a chick, and allow the spring release to push the card in/out.

Step 2: Install the Camera onto the Windshield
Clean the front windshield before installation. Tear off the plastic protective film from the suction cup press the suction cup to the suitable position on the inner windshield, and rotate the suction cup handle to ensure that the suction Cup is fixed. Do not install  the camera in place where it may obstruct the driver’s view .

Step 3: Connect the power
Connect the car charger to the camera and the cigarette lighter, hide the rest of the cable in the gap of the Interior trim board.The camera will auto start recording once poered on.

(After connecting the car changer, the camera will automatically start recording.Please feel free to contact us if you have any questions during the installation process.)

Step 4: Mount the Rear Cam
(If you don’ t have rear camera, please ignore this massage,and don’ t include the rear camera)
There are two ways to place the camera.

• METHOD 1: Mount on the rear windshield. There is a 3M glue in the package for the rear camera. Please clean the rear windshield and find a suitable position, then glue the rear camera on the windshield.

• METHOD 2: (Recommended!) Install it near the license plate.There are fixing screws inside the package to help you fix it.

2.1. Select a flat and central place that near the umber plate lamp at the rear of the vehicle to mount camera

2.2. Attach tape to the bracket of the camera to hold the camera in position while installing, ad drill two small hotes, one for the first screw, the second to run the reverse camera

2.3. Use ascrew driver to fix the first screw, leaving the screw loose enough to adjust to camera.

2.4. Insert the carers wire tough the intended drilled hole, checking the installation position.

2.5. Mark the place that suitable for the second screw and drill a small hole for it.

2.6.Fix the second screw and securely tighten both screws.

2.7..After the installation is completed, connect the rear plug to the rear camera interface of the recorder, and connect the red reverse line on the extension line of the rear camera to the positive pole on the reverse light.

Step 5: Start the engine and have a test run.
If you encounter any problems during the installation process, please contact us in time we will do our best to solve them for you.

FAQ

Q1: Why can not found the inside camera file?

Q2: Camera turns ON / OFF frequently automatically?

Q3: Camera Freezing/Lagging or Crashing?

Use a pin or and unfolded paper clip, press the RESET Button (Located at the side) to restart the camera. Now the dashcam should turn ON. If it still doesn't turn ON, then please CONTACT US.

Q4: I put an SD card in the dashcam and it only wants to recorded for a few hours then says sim card is full, why?

1. If the loop recording function is not turned on. Please turn on the loop recording function. Loop recording means the recorded video will be saved in sections for 1/3/5 minutes of your choice. When the SD card memory runs out, the previous video files will be overwritten except for the locked files. 2. If the loop recording function has been turned on. It may be that the locked files exceed the capacity memory of SD card, you can save the needed videos to your computer and then format the SD card. Also, it is recommended that you turn off the parking monitoring and motion detection functions and turn down the sensitivity of the G-sensor function when you are driving on the road, so that there will not be many useless videos being locked and taking up the memory of the SD card. (If you choose too high a sensitivity setting, then even slight fluctuations will trigger the locking of video files)

Q5: The car camera could not turn on?

There are 3 reasons that can cause this problem: 1) The dashcam needs continuous power supply, just check if the power connection is normal. 2) The dashcam needs to be reset, just connect the power, click the reset button with a pin and start the camera. 3) A defective card can cause the camera not to turn on, just remove the card or get anew card and insert it into the camera.

Q6: Suction cups do not attach well to the windshield?

Please clean the windshield with a glass cleaning wipe, then remove the protective film from the suction cups, then soak them in warm water for a few moments. Finally, press the suction cups to the right position on the inner windshield and rotate the suction cup handle to make sure the suction cups are fixed. If it still does not work, please contact us for replacement.

Q7: There is nothing appeared on computer when connecting the dash cam and computer with the type-C cable.

The type-C cable in package is just for power charge which can only connect with the car charge, but can not use for data reading. If you need check the saved videos and photos, please use the SD card adapter to connect with computer.

There are two reasons that can cause this problem: 1) The card is a low speed or bad quality card, just replace it with a high speed good quality card (speed over class 10, no more than 32GB), format your new SD card when you use it for the first time. 2) Insert the card when the camera is on, the camera can not recognize the card, just turn off the camera and insert the card, then turn on the camera.

Q9: Color screen or lines on the screen?

1. please check that you are using the proper memory card, SD card incompatibility can cause this. (We recommend using a class 10 high-speed micro card with no more than 32GB) 2. remove the SD card, reset the camera without inserting the SD card, and check if there are still lines on the screen.

Q10: The camera does not turn ON? (When you first use)

Please make sure you charge camera for 3 hours before first use. Make sure memory card is inserted properly.Then plug in power cable which should turn on the camera and it should start recording.

Q11: Oldest video files are missing?

Q12: Is Video fuzzy?

Please make sure the lens of the camera is clean and there is no dirt or grease on the windshield also, try to adjust the angle to avoid blocks or glare or wind-shield reflecting. If the lens is out of focus, we are extremely sorry in advance. This can be a manufacturing defect. Please send us an email with a screenshot or a sample video so we can get this resolved for you ASAP.

Q13: The camera gets HOT?

It is normal for your camera to run slightly hot. Due to it is recording video at high speed, the dash cam maybe hot during using. (no more than 158°F/70°C)

Q14: What is the red wire on the rear camera cable for?

After-Sates Service

Warranty

• All our products are covered b One-year warranty

Customer Support

• For questions, support or warranty claims, please contact us via Milerong s purchase page on Amazon and provide your order number. We will get back to you within 12 hours.
• lf you can provide the photos or video to show your problem, we will be appreciated
• IMPORTANT Proof of original purchase (Online order receiptis also accepted) is required for any warranty service

Milerong is firmly committed to continually improving our products, services and customer experience. As Our IP customer, tf you have any thoughts on how we can do better, we would appreciate your constructive feedback and suggestions Please contact us.

Thank you for choosing Milerong!

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>