Shenzhen Lonfine Innovation Technology Bone Conduction BT Headphones User Manual

Shenzhen Lonfine Innovation Technology Bone Conduction BT Headphones User Manual

Description

You can hear outside voice while listening music. Release the ears,free enjoy.

Wearing Way

As show in the picture,hang the earphone on the back of the neck, and at the same time, the earphone should stick on the cheekbone in front of the ear rather than on the ear.

Pairing Method

• Long press the power button for 3 seconds to power on the headphones
• Please keep the headphones and the cellphone in the range of 1 meters if it’s the first pairing
• The red and blue lights flash alternately when entering the pairing mode after headphones power on(if it doesn’t enter pairing mode, please press the “stultification” button for 3 seconds until the red and blue lights flash alternately)
• Open the BT set on your cell phone or the devices with BT function. Then search the BT devices and choose pairing name ” Z8 ” .Enter”0000″ pin code if needed.
• The blue LED flash slowly when it’s paired successfully

Note:

1. When the distance between the headphones and the BT devices is far than 10 meters or 33 feet,the BT headphones will disconnect from the devices. After that,once the they are in the range of 33 feet, they will automatically reconnect. However, if the headphones has disconnected more than 3 minutes,you may need to double click the “Multifunction Button” to reconnect the devices
2. If the headphones has paired,long press the “Multifunction Button” for 3 seconds,the headphones reenter the pairing mode which other cellphone can find the BT headphones and connect it.

Connect two devices

• Follow the pairing method,Pair the first cellphone, then long press the”play button”until the BT headphones goto pairing mode again, Pairing the second cellphone.
• Enter the cellphone setting interface of the first cell phone, and connect the device Z8 again

Charging Method

With a Micro USB cable(attach with the package)to connect the headphones and the USB port of your PC or charging source,the headphones will be charged. it takes 2 hours for full charging.When charging, the LED indicator is in RED,after charging finished , the LED indicator will turn to BLUE.

Note:

1. Because the battery may lose some power in the storage, here kindly suggest charging your headphones full before the first time you use it.
2. When charging, the headphones can not be used 3.If not use headphones for a long time,suggest charging ti once a month to keep battery life

LED Indicator

Red led flash quickly: low power Keeping red led light:charging Keeping blue led light:charging complete Blue led and red led flashing altemately: pairing mode Blue led flashing slowly:connected/calling/playing music Blue led flashing quickily: incoming call Blue led double flashing slowly:the headphones doesn’t connect the cellphone

Product Accessories

Specification

The speaker type: Bone conduction technology speakers
Play time: Up to 5 hours(depending on the actual volume and the sound source)
Charging time: 2 hours Standby time: Up to 10 days Effective range: 10 meters(33 feet)

Basic Operation

double click the
multi function to switch to next| No Buzzing
BT Paired| | Paired
B Tdisconected| | Dingdong
Enter pairing mode| Long press the multifunction button| Road to pair
Low battery| | dudu more times

because of the different operation system and music player, this feture may be different

Fault diagnosis and solution

button to reconnect or power on once time
Can not discover
B T headphones| Not enter pairing mode| Long press multi function
button for 3 seconds

Storage & Maintenance

• Please store the BT headphones in a cool, dry place. The working temperature is -10-45 t(14-113°11. In cold, or hot highly humid place will reduce the battery life.
• When long time storage, please charge it before using
• headphones resistance to water, but not waterproof, please don’t put the headphones into water. lf there is water on it, please use soft cloth to wipe clean
• Use soft dry cloth to clean headphones
• Do not use any sharp objects in connect with headphones Do not put headphones at a higher or lower temperature
• Do not charge the headphones in the moist environment.

FCC Caution

Labelling requirements,
This device complies with part 15 of the FCC Rules Operation as subject to the following two conditions:

1. This device may not cause harmful interference.. and
2. This device must accept any interference received, including mierference that may cause undesired operation

Changes or modification warning
Any Changes or modifications not expressly approved by the party responsible for compliance could sold the user’s authority to operate the equipment,

Information to the user

Note: This equipment has been tested and found to comply with the Limits for a Class B digital device, purslane to pan 15 of the FCC Rides. These limits ate designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can ndiate radio frequency energy and, if not installed and used in accordance with the instructions. may cause harmful interference to radio communications. However. there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception. which can be detamined by nu Mug the equipment off and on. the user is encouraged to try to con ect the interference by one or more of the following measwes.

• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and seceivet.
• Connect the equipment into an outlet en a circuit a-leieat front that to which the receiver is connected.
• Consult the dealer or an experienced radro.TV technician for help

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>