Hi-Power 16000mAh Portable Power Bank User Manual
- May 15, 2024
- Hi-Power
Table of Contents
Hi-Power 16000mAh Portable Power Bank
Thank you for your purchase!
Dear buyer, Thank you for your purchase! As a reliable seller, I am committed
to providing products and services that satisfy all customers! Hence, I
sincerely hope that such a shopping experience can give you a happy memory.
Although your satisfaction is our purpose, some unforeseen circumstances may
occur inevitably. Contact us immediately if you aren’t satisfied with our
products, you want to offer any suggestions, or you have other requirements
for our services. We promise to try our best to offer a satisfactory solution
as soon as possible (our email:
Kaazu19911007@163.com) All the very best
wishes to you. A sincere seller.
Schematic
- Output(USB-A1)
- Input/output(Type-C)
- Output Cable(Lightning)
- Input(Micro) Switch button
- Output Cable(Type-C)
- OLED display
Product Specification
- Product Model : PN-A10
- Battery Type : Rechargeable Polymer Li-ion Cell
- Input(Micro): 5V-3A;9V=2A; 12V=1.5A;(PD18W Max)
- Input(Type-C): 5V=3A;9V=3;12V=2A;15V=1.5A;(PD30W)
- Output(USB-A): 5V=3A;9V=2A; 12V=1.5A;5V-4.5A; (SCP22.5W Max)
- Output(Type-C): 5V=3A;9V=3A;12V=2A; 15V=1.5A; (PD30W)
- Output Cable(Type-C): 5V=2.1A
- Output Cable(Lightning): 5V=2.1A
- Charging Time : 3 hours(Use PD 30W adapter)
- Working Temperature: 0°C-50°C
- Product Size : (L)160 X (W) 72 X (H)20(mm)
- Product Weight : 250g
Instructions
LED display
A short press button once displays the device power remaining, when the power
bank works in the fast charging mode whether input or output, there is a
“Lightning” mark on the screen.
Charge the power bank through power adapter
This power bank comes with one Type-C input port, and one Micro USB input
port, connected with the phone power adapter, you can charge this power bank
with any input port, the percentage of power flashes when charging, and when
fully charged, the power display 100% and keep on. When the power bank is
recharging rapidly, the “Lightning” mark will light up on the LED screen.
Please Note: If swells or liquid leakage phenomenon occurs during
working, stop using it immediately.
Charge for cell phones, iPads, and other digital products
The power bank has 1 USB-A and 1 Type-C Fast charging port, 2 self-contained
output cables (Type-C cable; Lightning cable), and Charge digital products
with any of the outputs. During the charging process of digital products, the
LED display lights up, and the “Lightning” mark lights up when the digital
device is charging quickly, when the digital product is fully charged, Please
stop supplying power to the digital device, and then the LED display turns
off.
Please Note
When the power remaining is low, the power indicator flashes for a warning,
the device can’t output at this moment.
Please Attention
- Full charge the product with your first-time use;
- If swell, leakage, deformation, immerse in water, or short circuit occurs, stop using immediately;
- Don’t drop the device or use it in the high temperature, moist, strong magnetic environment;
- Please put the power bank in a place where kids can’t reach it;
- Don’t leave the product on the car dashboard, the high temperature will damage the device caused by strong sunlight irradiation;
- Don’t throw any debris in the input-output ports, it may cause damage or short circuits;
- To avoid unusual results, please use the standard or original packaged charging cable, power adapter, etc.;
- Don’t use the all-in-one cable to charge multiple devices simultaneously, it may cause damage to the power bank;
- Please confirm whether your device input voltage is the same as the power bank’s output voltage before charging;
- Overdischarge may occur if a long time is laid aside, to not affect the performance, please fully charge and discharge the power bank at least every 3 months.
Warning
- The device includes a Li-ion battery cell, don’t disassemble the power bank’s shell without permission, may cause cell damage or other danger;
- Don’t disassemble, press, puncture, or make it short circuit, don’t throw it into water, fire or exposure outside that above 60°C, to avoid catching fire and other dangers;
- The device has overheating protection, it will stop working when the environment’s temperature exceeds the normal condition, you should put it in the normal environment, then restore its output by short pressing the button.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>