enegic Power Management For Your EV Charger User Guide
- May 15, 2024
- ENEGIC
Table of Contents
enegic Power Management For Your EV Charger
Product Information
Specifications
- Product: EV Charger
- Brand: Easee
- Integration Guide: Easee
- Licenses: Enegic
FAQ
- Q: What should I do if I encounter issues during the integration process?
- A: If you encounter any issues during the integration process, please refer to the troubleshooting section in the user manual or contact customer support for assistance.
- Q: Can I use the EV charger without integrating it with Easee?
- A: Yes, you can still use the EV charger without integrating it with Easee, but integration allows for advanced monitoring and control features.
Before You Start
- A Monitor must be installed and configured to measure total consumption.
- The Easee charging box must be commissioned and registered in Easee Cloud.
Follow these steps to integrate with Easee:
To do in Easee Cloud
- Use the Easee Installer app to change the operator of the charging box to “Skärebo – Powered by Enegic”. It is also possible to make the operator selection logged in to the user’s account in easee.cloud.
- In the Enegic app, go to Settings, Licenses. Scan the QR code on the included integration license.
- Go to Settings, Reporters and Add new Reporter.
- Select Easee Charge Control as the type of reporter.
- Enter an appropriate name such as “Easee charge control”. Enter the serial number of the Easee charging box.
- Enter charger fuse size and a safe charge level if the Enegic Monitor goes offline.
- Enter main fuse size.
- Ensure the correct Enegic monitor is selected as total consumption measurement. Then press Save. The reporter is now configured.
- Go to Settings, New device and Add new virtual device. Follow the instructions in the app to set up the virtual device.
- Enegic Monitor is now integrated with Easee
- The charging boxes) in the Easee installation you have integrated with now retrieve power values from Enegic, which enables a safe and efficient power output.
In the overview in the app, you will now see that Easee Charge Control has been created:
- From here you can control the charging boxes in the facility by activating Adaptive charging.
In the overview in the app, you will also see that you have access to the Easee charging box:
From here you can control functions and see the status of each charging box.
With Adaptive charging, you can set a personal schedule for the electric car charger (Simple schedule) or choose to automatically charge based on the best available electricity prices (optiCharge)
Information
Read User Manual Online (PDF format)
Loading......