BPXX D465B Barcode Printer User Guide

BPXX D465B Barcode Printer

Specifications

• Speed: 152 mm/s
• Resolution: 203 DPI
• Density: 12 Max
• Paper width: 104mm (4.09) (Default 4inch)
• Paper length: 1778mm (70) (Default 6inch)
• Paper Thickness: 0.06 ~ 0.20 mm
• Power Adapter: 24V/2.5A

Product Usage Instructions

Installation

1. Place the printer on a steady surface and ensure that the power is turned off.
2. Connect one end of the USB data cable to the printer and the other end to the host computer.
3. Insert the power cord into both the printer and the power outlet.

Loading Media

1. Push the open button to open the cover.
2. Put in the folding paper.
3. Pull out the paper roll, and guide, and fasten the paper with the paper guide.
4. Close the cover carefully.

Feed Key & Auto Paper Detection

Content for Feed Key & Auto Paper Detection instructions goes here…

Driver Installation

1. Find the Windows/macOS Driver in the USB stick.
2. Open the location then double-click the driver icon, and accept the license agreement.
3. Select the default installation path then complete.

LED Status

An explanation of LED status codes is here.

Cleaning and Maintenance

1. General Cleaning: Keep the outside of your printer clean by wiping it periodically with a soft cloth dampened with water. Do not use abrasive cleaners as they may damage the surfaces.
2. Cleaning the Print Head: After installing a new print head or using a roll of media, rub the cleaning pen across the dark area of the print head. Allow the print head to dry for one minute before loading labels.
3. Shock HAZARD: Always turn off the printer before cleaning. Try to avoid touching the print head whenever possible. If you need to remove dirt or dust, always gently clean the print head with a cleaning pen or a cotton swab moistened with 100% isopropyl alcohol.

FAQ

Q: How do I connect the printer to my computer?

• A: You can connect the printer to your computer using a USB data cable. Ensure that both devices are powered off before establishing the connection.

Q: What should I do if the printer shows an ‘out of paper’ error?

• A: If you encounter an ‘out of paper’ error, check that the paper roll is properly loaded and ensure that there is paper in the tray. If the issue persists, refer to the user manual for troubleshooting steps.

Production View

Packing List

Installation

1. Place the printer on a steady surface and ensure that the power is turned off.
2. Connect one end of the USB data cable to the printer and the other end to the host computer.
3. Insert the power cord into both the printer and the power outlet.

Note: Please make sure to turn off the printer before connecting it to the power.

Loading Media

1. Push the open button to open the cover.
2. Put in the folding paper.
3. Pull out the paper roll, guide and fasten the paper with the paper guide.
4. Close the cover carefully.

Note: Please make sure the cover is firmly closed.

Feed Key & Auto Paper Detection

1. The functions of the Feed key
2. Feed paper

  * When the printer is ready, press the feed key, which will feed the paper to the next label.
2.  **Pause the printing job**
  * When the printer is printing, press the feed key, the printing job will be paused and the LED will be blue blinking. Press the feed key again, the printing job will be resumed.

2. Auto Paper Detection:
   • This printer can automatically detect the size of the media when it is changed. When loading the first label or sheet and closing the printer’s cover, the printer will run the paper detection and be ready for printing.

Driver Installation

• Find the Windows/macOS Driver in the USB stick.
• Open the location then double-click the driver icon, and accept the license agreement.
• Select the default installation path then complete.
• Please ensure that the printer is turned on, and use the provided USB cable to connect the printer to the computer.
• The computer should automatically enter the printer interface.
• Select the plug-and-play printer driver to install, choose the printer model (note that the actual port may differ from the instruction manual), and click “Next.”
• Determine the selection is complete.
• Once downloaded on the device, the printer equipment is immediately installed on the “4B-2054N” printer.
• Please note that the type of installation driver may vary depending on the machine model.
• Right-click, Select Printing preferences, and you can set the. parameters of the printer.

LED Status

Specifications

Cleaning and Maintenance

• By following these simple maintenance guidelines, you can ensure a longer lifespan and maintain high-quality printing performance.
• General Cleaning – Keep the outside of your printer clean by wiping it periodically with a soft cloth dampened with water. Do not use abrasive cleaners as they may damage the surfaces.
• Cleaning the Print Head – After installing a new print head or using a roll of media, rub the cleaning pen across the dark area of the print head. Allow the print head to dry for one minute before loading labels.
• Shock HAZARD – Always turn off the printer before cleaning.
• Try to avoid touching the print head whenever possible. If you need to remove dirt or dust, always gently clean the print head with a cleaning pen or a cotton swab moistened with 100% isopropyl alcohol.

Warning

• This manual contains confidential information of the printer manufacturer and is intended solely for the use of parties operating and maintaining the equipment described herein.
• Such confidential information may not be used, reproduced, or disclosed to any other parties for any other purpose without the express written permission of the printer manufacturer.
• Use the camera or QR scanner to scan Or Visit: https://bpxx.afterservice.vip

Read User Manual Online (PDF format)

Download This Manual (PDF format)

Download this manual  >>