Vividia TVS-360-WP Pole Camera Instruction Manual

May 15, 2024
Vividia

Vividia TVS-360-WP Pole Camera Instruction Manual
Vividia TVS--WP Pole Camera

Product Overview

This TVS-360-WP can take up to 4K videos and 12 MP photos.  Functions of photographing, recording and controlling, like 360 ° camera rotation, can be completed through screen touch, buttons both on monitor & rod. This detector uses a 10.1 HD touch screen, a 5 megapixels 360° intercom camera (optional), a 5 megapixels hose intercom camera(optional), an infrared thermal imaging camera(optional ) and a telescopic carbon fiber rod combination. Multipleombinations, simple assembly, convenient carrying, widely applicable to life rescue, disaster rescue, anti-terrorism and explosion-proof, scientific investigation, and other fields.

4K Tablet Monitor

Tablet Monitor

  1. Protection corner
  2. Microphone
  3. 10 inch screen
  4. Up Down Left Right
  5. ON-OFF
  6. LED Control
  7.  Photo
  8. Record
  9. Menu/Confirm
  10. Play/Return
  11. Speaker
  12. DC12V
  13. Charge LED
  14. TEPY-C
  15. Protective cover1
  16. Rope buckle
  17. Pedestal Connector
  18. Camera CON
  19. Headset
  20. TF Card
  21. HDMI
  22. Protective cover2
  23. Battery Connector
  24. Battery box.
  25. Battery box Charge LED
  26. Battery box DC12V

360° Video Camera (audio optional, not included)

Video Camera

  1. Lens
  2. 12 LEDs Adjustable Brightness
  3. Microphone
  4. Speaker
  5. Up & Down Rotation Unit
  6. Left & Right Rotation Unit
  7. Circular Connector

Audio and Video Camera (optional camera)

Audio and Video Camera

  1. 12 LEDs
    Adjustable Brightness

  2. Lens

  3. Microphone

  4. Speaker

  5. Metallic Hose

  6. Connector

Infrared Thermal Imaging Detector (Optional)

Infrared Thermal Imaging Detector

  1. Infrared detector
  2. Metallic Hose
  3. Connector

Carbon Fiber Rod (the control part may change)

Carbon Fiber Rod

  1. Motor Rotates Downward
  2. Motor Rotates leftward
  3. Record
  4. Camera Brightness Adjustment
  5. Motor Rotates Upward
  6. Photo
  7. Motor Rotates Rightward
  8. Monitor Port
  9. Fix Knob
  10. Camera Port

Optional Setup, Installation & Use

  1. Infrared Thermal Imaging Life Detector Optional)
    Optional Setup

  2. 360 ° Audio and Video Life Detector Optional)

  3. .Audio and Video Life Detector Optional)
    Optional Setup

Button Operation

  • ON-OFF
    Press briefly to power on. Press it for 3s to power off. If crash, press it for 10s to power off and reset.

  • Photo
    Press briefly, flashes once and get a photo.

  • Record
    Press briefly to record, and the icon turns blue。The video timer can time. Press again to end.

  • Play/Return
    Press briefly to enter. Press Up-Down-Left-Right to select. Press to confirm. Press Play again to exit.

  • LED Control
    Press it briefly to select On-7 brightness cycle-OFF.

  • Menu/Confirm
    Press it briefly to enter. Press Up-Down-Left-Right to select. Press to confirm. Press Play to exit.

  • UP
    Press to turn camera upward. Release to stop.

  • Down
    Press to turn camera downward. Release to stop.

  • Left
    Press to turn camera leftward. Release to stop. Press & hold for 10s to turn camera leftward and into cruise mode. Press any UP-Down-Left-Right to stop.

  • Right
    Press to turn camera rightward. Release to stop. Press & hold for 10s to turn camera rightward and into cruise mode. Press any UP-Down-Left-Right to stop.

Touch Screen

  1. Mark
    : Pop up keyboard to input mark, which will display in the
    lower left corner. Touch it to revise or delete.

  2. Lens Zooming (Purchase our zoom camera)
    : Move slider to zoom the lens of remote camera.

  3. Range Measurement(Purchase our range camera)
    : It shows the measured range by remote camera.

  4. LED Brightness Control
    : Move slider to control the brightness of remote camera.

  5. Speaker Volume Control
    : Move slider to control the speaker volume.

  6. System Setup
    : Touch this to enter into system setup

  7. Screen Switch
    : 9: 16 and 3:4 screen display switching

  8. Play
    : Play photo & video. Touch to lock the important ones in case error deletion. Touch again to unlock.

  9. Zoom out
    : Touch this to zoom out the screen.

  10. Zoom in
    :Touch this to zoom in the screen.

  11. Photo
    : Touch to take photo and screen flashes once.

  12. Record
    The icon turns blue, and the video timer starts timing

  13. Mic.
    : Mic. is on. If crossed, Mic. is off.

  14. Micro SD card
    :Card is ok. If crossed, abnormal or no card.

  15. WIFI
    WIFI is on; if crossed, WiFi is off.

  16. Battery power
    :Display battery power: the lighting shows it’s charging

System Setup

System Setup

Language
Show the available languages: English, Chinese, Traditional Chinese, Japanese, Korean.
Mic.
Touch to turn the microphone on/off.
Brightness
Touch to set the screen brightness.
Screensaver
Touch to set the time of screen Saver
Mirror
Touch to set: normal display; flip horizontal; flip vertical; flip horizontal & vertical.
Camera
Touch to set camera input resolution. According to the resolution & frame rate of the known AHD camera, you can choose: 2K, 1080P, 720P, CVBS. Monitor will reset after switching the resolution.
Record
Touch to set resolution of recording.
Loop Time
Touch to set the time of recycle recording: 1s, 2s, 3s, 5s 10s, off. If choose ‘off’, recording will end until the micro SD card is full.
Photo
Touch to set the size of photo: 1.2 mega pixels, 8 mega pixels, 4 mega pixels, 2 mega pixels.
Clock
Touch to set the system date & time.
Baseline
Touch to set the types of baseline: off; cross; ruler; roundel.
Device Info.
Touch to enter “About” and “Reset”. Touch “About” to show device information: Wifi name and password, memory size & remain storage of micro SD card, firmware version. Touch “Reset” to delete all the settings in the current tablet monitor, and it will be restored to its original factory state and restarted.
Wifi Switch
Touch to switch Wifi on or off.
Format
Touch and check format micro SD card. Format will delete all the data in micro SD card. Be sure to do a good job of data backup.
Return
Touch it to return and exit system setting.

Road am APP

Road am APP

Before run Road am App, turn on the WIFI of the monitor first. Find the SSID name and password in “About”. Then add the WIFI network of the monitor to the WIFI configuration of the external device.

APP Monitoring Interface

APP Monitoring Interface

  • Run Road am App,touch device to connect. After successful connection, it automatically jump to camera interface. You can take photo, recording, play and share. You also can change the WIFI name and password in Road am Setting.
  • Save the photo and recording files to monito

Charge

Push away the waterproof protective cover. Connect DC12V  adapter with DC port, or connect Type-c port with USB-Adapter (user himself provided). During Charging, the indicator is on. When fully charged, the light turns off. It takes about 4 hours to fully charge.

Firmware Upgrade

Before upgrade, please ensure power is >20% (1 grid). Copy upgrade file (SigmatarUpgradeSD) to microSD card. Power on, it will auto upgrade. It will auto turn off after upgrade. Unplug card to finish upgrade.

Attention

  1. Please use device under temperature between –20 ℃ and 60℃. Excessive temperature will cause abnormal expansion, ignition and even explosion of the battery. Before using it under low temperature, it is recommended to fully charge under normal temperature to extend the life of battery.
  2. Please place device in a proper position to prevent it from falling and breaking the screen.
  3. This machine is dustproof and rainproof. Please do not immerse the machine in water.
  4. If you continue to use the microSD card on this device after upgrade, please delete the upgrade file in the card first。

Specification

4K Tablet Monitor

Display *10.1inch 1280800pixels**
Max photo resolution 4000X3000(12 m
Video Record 4K(16:9): 3840×2160@25/30fp

2K(4:3):2560×1944@25/30fps
2K(16:9):2560×1440@25/30fps
1080p(16:9):1920X1080@25/30fps
Video Format| MP4(H.265)
HDMI Output| 1080P
microSD Card| 2GB-256GB (64GB default)

360° Camera

Sensor SONY
Resolution 5 megapixels(2560 x 1944)
Camera Rotation 360 ° horizontal circular rotation

180° vertical rotation
Rotation Rate| 10r/min
Light Source| 12 LEDs
FOV| 128.5°
Aperture| F2.0
Focal Length| 0.4-5m

Hose Intercom Camera (Optional, not included)

  • Sensor: SONY
  • Resolution:   5 megapixels(2560 x 1944)
  • Light Source: 12 LEDs
  • FOV: 128.5°
  • Aperture: F2.0
  • Focal Length: 0.4-5m
  • MIC: 48dB
  • Speaker: 1W

Infrared thermal imaging camera (Optional, not included)

  • Detector: uncooled vanadium oxide infrared focal plane detector
  • Resolution: 384×288pixels
  • Pixels Spacing: 12μm
  • Response band: 8~14μm
  • NETD: ≤50mK@25℃

Carbon Fiber Rod

Unfolded   Length: 5 meter
Collapsed Length: 1.40m
Number of Telescoping Joints: 5
WiFi Protocol: 802.11 a/b
WiFi Operating Freq:  2.4000-2.4835GHz
WiFi Transmission Power: <16dBm
Battery Capacity: 48Wh
Battery Type: Li-battery
Charging Environment TEMP: 5℃-40℃
Use Environment TEMP: -20℃-50℃
Max Charging Power: 15W
Working Time: Over 8 hours
Power Supply: DC 12V / 2.5A

RoadCam App Download

QR Code

Vividia Technologies
www.vividia-tech.com

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>

Vividia User Manuals

Related Manuals