Optoma FHDS130 Affichage SOLO LED 130 Inch all in One Owner’s Manual
- May 15, 2024
- Optoma
Table of Contents
Optoma FHDS130 Affichage SOLO LED 130 Inch all in One
Overview
The Optoma FHDS130 is an all-in-one Solo LED display designed for an immersive viewing experience. It features a bright LED display with a fine 1.5mm pixel pitch and a wide viewing angle.
- Bright LED display with a 1.5mm pixel pitch and a wide viewing angle.
- Simple 3-step process for quick installation – reducing setup time from days to hours.
- Pre-calibrated for immediate use – no color or brightness adjustments needed.
- ECO standby mode < 0.5W – Compliant with ErP regulations and reduces power consumption.
The FHDS130 is a 130″ (2.88 x 1.62m) Full HD 1080p all-in-one solution for rapid deployment and immediate use.
Thanks to a straightforward 3-step installation process, the complexity of setting up traditional LED displays is solved. With pre-built processing, the FHDS130 is ready to be used after a quick installation process. It comes pre- calibrated, so it is ready to use after assembly. Designed for both landscape and portrait modes, the FHDS130 display can meet all your viewing needs.
Product Specifications
- Brand: Optoma
- Model: FHDS130
- Display Type: LED
- Resolution: Full HD
- Pitch: 1.5mm
- Viewing Angle: Wide
Specifications
| EAN: | 5055387663530 |
|---|---|
| Screen | 1080p Full HD (1920×1080) |
| Screen Size (Diagonal) | 130″ |
| Screen Area | 2.91m x 1.65m |
| Brightness (Before Calibration) | 800 nits |
| Contrast | 5000:1 |
| Dimensions (LxHxD) | 2919 x 71 x 1655mm |
| Weight | 125 kg |
| Scaler-switcher | Built-in scaler-switcher |
| Sender | Built-in sender |
| LEDs | Pitch (H x V) 1.5mm, LEDs per pixel 3 |
| LED Surface Color | Black |
| LED Tile Resolution (Width x Height) | 160 pixels/module |
| LEDs per Tile (Width) | 90 pixels/module |
| LED Pixels per Zone | 444,444 pixels/m2 |
| Module | Width 2.919mm, Height 1.655mm |
| Viewing Angle – Horizontal/Vertical | 140° |
| Protection Index (Front/Rear) | IP40/IP20 |
| Surface Maintenance | Front access |
| Storage Temperature | -10°C – 60°C |
| Operating Temperature | 0°C – 40°C |
| Color | 16 bits |
| Gray Levels | 281 trillion colors |
| Refresh Rate | >3000 Hz |
| Contrast Ratio | 5000 |
| Control Levels Brightness | 100 |
| Power Consumption (Max) | 3,000 watts per panel |
| Power Supply | 200 – 240V |
| Lifespan | >100,000 hours |
| Connectivity (Input/Output) | Inputs: 2 x HDMI 2.0, 1 x 3G-SDI, 1 x VGA, 1 x |
RJ45, 1 x RS232, 1 x USB-B service, 2 x USB-A service, 1 x HDBaseT
Outputs: 1 x Audio 3.5mm
Product Usage Instructions
Setup:
Place the Optoma FHDS130 in a suitable location with ample space for
viewing. Ensure proper ventilation around the unit.
Power On:
Connect the power cable to the Optoma FHDS130 and plug it into a power
source. Press the power button to turn on the device.
Adjustments:
Use the remote control or onboard controls to adjust settings such as
brightness, contrast, and volume to your preference.
Input Selection:
Choose the input source (HDMI, VGA, etc.) using the remote control or
buttons on the unit to display content from your desired device.
Viewing Experience:
Sit back and enjoy the Full HD resolution, vibrant LED display, and wide
viewing angle of the Optoma FHDS130 for an immersive viewing experience.
© Copyright 2023, Optoma and its logo is a registered trademark of Optoma Corporation. Optoma Europe Ltd is the licensee of the registered trademark. All other product names and company names used fi fi herein are for identi cation purposes only and may be trademarks or registered trademarks of their respective owners.Errors and omissions excepted, all speci cations are subject to change without notice. All images are for representation purposes only and may be simulated.
For more information and professional displays, visit Optoma France.
Frequently Asked Questions (FAQ)
How do I clean the Optoma FHDS130 screen?
Use a microfiber cloth lightly dampened with water to gently wipe the screen. Avoid using harsh chemicals or abrasive materials.
Can I mount the Optoma FHDS130 on a wall?
Yes, the Optoma FHDS130 is wall-mountable. Ensure you use appropriate mounting hardware and follow the installation instructions provided in the user manual.
What is the pixel pitch of the Optoma FHDS130 display?
The pixel pitch of the Optoma FHDS130 display is 1.5mm.
Is the FHDS130 display pre-calibrated?
Yes, the FHDS130 display comes pre-calibrated for immediate use after installation.
What is the lifespan of the FHDS130 display?
The Optoma FHDS130 display has a lifespan of over 100,000 hours.
Does the FHDS130 have an ECO standby mode?
Yes, it has an ECO standby mode that consumes less than 0.5W and is compliant with ErP regulations.
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>