DST1875 Deluxe Eternity 4 Person Back To Back Workstation Instruction Manual

Table of Contents

Specifications

Product Name: Eternity Back-to-Back Workstation
Available Configurations: 2 Person, 4 Person, 6 Person
Assembly Time: 40-45 minutes
Tools Required: Screwdriver, Electric Drill, Pencil, Measuring tape/Ruler (Tools not included)
Skill Level: Easy to Intermediate

Assembly Instructions
Follow the steps provided in the manual for assembling the Eternity Back-to- Back Workstation.

Step-by-Step Assembly

Identify the workstation configuration you are assembling (2 Person, 4 Person, or 6 Person).
Gather the required tools: Screwdriver, Electric Drill, Pencil, Measuring tape/Ruler.
Begin assembling the workstation according to the provided instructions.
Ensure all pieces are securely connected and aligned properly.
Double-check the final assembly for stability and safety.

Frequently Asked Questions (FAQ)

Q: Do I need to pre-drill holes for assembly?
A: No, pre-drill holes or markings are not provided on tops. Follow the assembly instructions carefully.
Q: Can I assemble the workstation alone?
A: While it’s recommended to have two persons for most products, this workstation can be assembled by one person with basic skills.
Q: What if I don’t have all the required tools?
A: Make sure to have all the necessary tools before starting the assembly. Missing tools may cause difficulties during the process.

Assembly Instructions:
Eternity Leg Back-to-Back Workstation

Time Required:
40-45 minutes

The Assembly Skill Rating is a 5-point system that shows the degree of effort needed in assembling a specific product. With 1 being easy for the average person and 5 requiring an expert.
For most products, two persons are recommended.
Please note, as this is a commercial product, some intermediate skills are required.
No pre-drill holes or markings are provided on tops.

NOTE

As this is a commercial product, some intermediate skills may be required.
No pre-drill holes or markings are provided on our tables or desktops.
Please check you have all the hardware before assembling.
If you are missing any hardware, please contact your Rapidline reseller. Please ensure you have the name of the item, the required hardware part, and the quantity.
Please retain your receipt as proof of purchase to validate your warranty.
Assemble on a clean, flat, smooth surface such as a rug or carpet to avoid parts from being scratched.
Remove all wrapping materials, including staples and packing straps before you start to assemble
Keep all hardware parts out of reach of children.

CAUTION

Heavy product. Do not attempt to lift or move without help
Do not tighten screws and bolts until completely assembled.
Do not use this product unless all bolts and screws are firmly secured and tightened.

WARNING

If parts are missing, broken, damaged, or worn stop using the product until all repairs are made.
Failure to follow these warnings could result in serious injury.

MODEL NO: Eternity Back to Back – 2-Person

MODEL NO: Eternity Back to Back – 4-Person

MODEL NO: Eternity Back to Back – 6-Person

IMPORTANT NOTE:

Place all laminated parts on a clean and smooth surface such as a rug or carpet to avoid the parts from being scratched.
Check to be sure that you have all parts and hardware.
Remove all wrapping materials,including staples & packing straps before you start to assemble.
Don’t tighten all screws/bolts until all completely assembled.
Keep all hardware parts out of reach of children.