EVOFORCE1 Android STB with The TiVo Creek Remote Control User Guide
- May 15, 2024
- EVOFORCE1
Table of Contents
EVOFORCE1 Android STB with The TiVo Creek Remote Control User Guide
This guide covers the EVO Force 1 Android STB with the TiVo Creek remote control.
Remote Overview
Using Voice Commands
- Press and release the Google Assistant button on your remote (button 13 in the overview image)
- Tell Google Assistant what you would like to open, search for, etc.
a) Search for a movie: “Star Wars”
b) Open settings: “Settings”
c) Ask for suggestions based on genre: “Show me action movies”
Re-pairing The Remote
If you are having issues with your remote control, it may need repaired with the EVO Force 1 box.
- On the remote hold down both the Silver TiVo button (button 3) and the back button (button 6) until the remotes activity light turns solid red.
- Let go of both buttons, the light will now flash amber
- The TV screen will now prompt to repair the remote, do not touch anything on the remote. The remote should pair automatically within 30 seconds.
- If it doesn’t pair automatically, retry steps 1-3.
a) If automatic pairing keeps failing, you may need to factory reset the remote.
b) If pairing still fails after factory resetting the remote, contact support for additional assistance.
Factory Reset the Remote
Only factory reset your remote if you are unable to repair the remote to the EVO Force 1 box or if instructed by support.
A factory reset will unpair the remote with the box and any other accessories it is setup for; TV, soundbar, etc.
- Press and hold the TiVo button (button 3) and the TV power button
(button 1) at the same time for approximately 3 seconds. Release the buttons. - The activity light will be solid red.
- Press Volume down 3 times and then press the TiVo button (button 3).
- The activity light will flash red 3 times.
- Follow the re-pairing procedure above.
Read More About This Manual & Download PDF:
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>