Royal Rascals Baby Car Mirror Instructions
- May 15, 2024
- Royal Rascals
Table of Contents
Installation instructions and tips for Royal Rascals® Baby Car Mirror
Baby Car Mirror
Thank you for purchasing our Royal Rascals® Baby Car Mirror.
Below are some important tips to help install your Royal Rascals® Baby Car
Mirror perfectly. There are two options below, Option 1 being the most common.
-
Remove the Royal Rascals® Baby Safe Mirror from the box.
Tip: Leave the protective film on the mirror until after you’ve installed it. This will help reduce finger marks from day one and keep the reflection crystal clear.
Tip: Ensure that both buckles are unclipped before attempting to install. -
Clip one strap around the headrest and tighten until secure.
-
Repeat with the second strap as per Step 2.
-
Double check that both straps are tightened sufficiently.
Tip: Do not overly tighten – just enough so that the mirror is securely held in place.
Tip: Check that both straps are not twisted.
Tip: Buckles are best located near the centre of the headrest per the images below, and not on the edge.
-
Once your Royal Rascals® Baby Safe Mirror is securely fastened, test the mirror’s angle by turning and tilting it until it is positioned so you can see your baby when in the driving seat.
Note: You may need to test this a couple of times until you get the right angle. -
Remove the protective film from the front of the mirror and enjoy seeing your baby whilst driving and knowing they are safe with your new Royal Rascals® Baby Car Mirror.
Baby on Board Sign – the recommended location for the Baby on Board sign is ideally behind the backseat headrest on the driver’s side. This way it isn’t obscuring your view and is directly in the line-ofsight of the motorist behind you.
Thanks again and have a great day with your family!
Best wishes,
Wendy, Lewis and the team @ Royal Rascals®
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>