TotalMount Xbox Series X Innovelis Cube Wall Mount Instructions
- June 4, 2024
- TotalMount
Table of Contents
TotalMount Xbox Series X Innovelis Cube Wall Mount
INTRODUCTION
Many people first learn about TotalMount products while shopping in Apple
Stores. We focus exclusively on designing best-in-class mounts for
electronics.
Since our founding in 2007, our passionate team has earned over 40 patents and
has consistently delivered premium-quality mounts.
Find a Mounting Location
Find a mounting location to the left or right of your TV. (You can also mount
the Xbox below your TV but more cable length will be visible.)
The screws can be inserted into drywall without using a drill. If you are
mounting into wood or masonry, use the mount as a guide to pre-drill the holes
using a 3/16 inch diameter drill bit.
Warnings: Wear proper eye protection when installing. Do not insert screws into a wall unless you are sure there are no pipes or wires in the mounting area (to avoid electrocution, fires, and flooding). Do not insert screws into a TV.
INSTRUCTION
Screw to Wall Near Your TV
-
Insert a screw. For maximum grip, stop spinning the screws as soon as they are fully inserted.
-
Move the mount until the bubble is between the lines, and then insert screws through the rest of the screw holes.
Slide Xbox Into TotalMount -
Plug the power and HDMI cables into the Xbox before inserting the Xbox into the TotalMount.
-
Gently slide the Xbox into the TotalMount such that the cables exit the side of the TotalMount toward the TV.
If the disc drive is blocked by the mount, remove the Xbox from the mount and rotate the Xbox.
Ready to write a review?
We would greatly appreciate if you could take a minute to write a review with
your favorite TotalMount retailer.
Questions or concerns?
Please contact us directly at
Listen@innovelis.com
Need a secure place to hold your controller, gaming console, media player, remote, router, or headphones?
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>