MOKO SMART N1 Stamp Devices ODM and JDM Partner User Manual
- May 15, 2024
- MOKO SMART
Table of Contents
MOKO SMART N1 Stamp Devices ODM and JDM Partner
Revision History
| Version | Data | Notes | Contributor(s) |
|---|---|---|---|
| V1.0 | Jan 24, 2024 | Initial version | Leo |
About document
This product specification was designed to help users to know the hardware
overview and feature instructionsofN1stamp product. Through this document,
users will be initial to understand the application scenarios, hardware
specifications, basic instructions as well as packaging information of the
product.
Overview
This Product specification is mainly applicable for MOKO N1 stamp products, and mainly contains below parts:
- Product Brief
- Application scenarios
- General specifications
- Basic instructions
- Package information
Product Brief
Figure 1: Appearance overview of N1 stamp
Thin, Lite and Unobtrusive!
The N1 Stamp is a small form factor BLE tag. With breakthroughs in cost,
distance and sustainability, this tag is the best choice for medical equipment
tracking, shopping cart tracking and other asset tracking in various
scenarios.
In addition, the N1 Stamp product supports extended temperature sensors, which
can be applied to environment temperature monitoring scenarios such as fresh
fruits and offices.
Application scenarios
Healthcare
- Medical equipment usage frequency monitoring
- Asset theft prevention
- Faster positioning of medical equipment in an emergency.
- Automate inventory counts
Asset environment
- Shopping cart tracking and real-time prediction
- Asset ambient temperature monitoring- Reliable shoplifting prevention
Smart Office
- Office Furniture & Equipment tracking
- (Desk, Chairs, Photocopier) – Asset presence detection for theft prevention
- Automate inventory counts
General specifications
Hardware specifications
Hardware specifications
Bluetooth| Bluetooth 4.2
Connectivity| Unconnectable
Dimension| 36.5mm x 23.5mm x 4.7mm
Transmission range| Up to 160 meters
Material| ABS
Waterproof| Tolerate wiping with wet cloth but not immersion into
water
Color| White
Installation| Sticker
Button| N/A
Operating temperature| -20°C / + 60°C
Storage temperature (Recommend)| -20°C / + 60°C (without battery)
10°C / + 25°C (with battery)
Operating Humidity| 0% ~ 95% (non-condensing)
Antenna type| PCB onboard
Power supply| Coin cell battery CR2016 | 85mAh | Replaceable
Sensor Spec
| Supports extended temperature sensors
l Temperature Accuracy : ± 1 ℃
l Temperature range : -20 ~ 60 ℃
Battery life
| l 18 months (Without Temperature sensor – 1 active slot, 5000ms ADV interval, 0 dBm Tx Power)
l 9 months (With Temperature sensor – 1 active slot, 5000ms ADV interval, 0 dBm Tx Power)
Default Parameter settings
Software configurations
Type| Items| Default settings
Supported Adv frame
| Apple – iBeacon Eddystone (UID/TLM)
Customized frame — Sensor info
| ****
Configurable
Default Adv slot| Default adv slot settings
Default PHY| Default PHY settings| 1M PHY
Slot 1 – Sensor info
| Tag ID| [Mac address]
Tx power| 0dBm
Adv interval| 5000ms
Note: The broadcast parameters of the device can be configured only before
the device leave the factory, and cannot be configured again after the device
leave the factory
Basic instructions
How to wear/install N1?
How to power ON N1?
To minimize the size of the product as much as possible and be suitable for
various scenarios, as well as to avoid intentional power actions, the N1 stamp
has no reserved mechanical button design. Therefore, we have added“mylar film”
to simply power on the device. Power ON: Take the “mylar film” out, and the
device will start broadcasting.
How to replace the battery?
Package information
Package information
Item| Inner box| Carton box
Quantity (N1 device)| 40pcs/box| 400pcs/carton
Quantity (3M sticker)| 40pcs/box| 400pcs/carton
Size| 30610972mm| 590320160mm
Copyright 2024 MOKO TECHNOLOGY. All Rights Reserved. Any information furnished by MOKO TECHNOLOGY LTD. is believed to be accurate and reliable. All specifications are subject to change without notice. Responsibility for the use and application of MOKO TECHNOLOGY LTD. materials or products rests with the end user since MOKO TECHNOLOGY LTD. cannot be aware of all potential uses. MOKO TECHNOLOGY LTD. makes no warranties as to non-infringement norms to the fitness, merchantability, or sustainability of any MOKO TECHNOLOGY LTD. materials or products for any specific or general uses.
MOKO TECHNOLOGY LTD. or any of its affiliates shall not be liable for incidental or consequential damages of any kind. All MOKO TECHNOLOGY LTD. products are sold under MOKO TECHNOLOGY LTD. Terms and Conditions of Sale in effect from time to time, a copy of which will be furnished upon request. Other marks may be the property of third parties. Nothing herein provides a license under any MOKO TECHNOLOGY LTD. or any third-party intellectual property right.
This equipment has been tested and found to comply with the limits for a Class B digital device, under Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used by the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off, the user is encouraged to try to correct the interference by one of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and the receiver.
- Connect the equipment to an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help
FCC STATEMENT
-
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:
(1) This device may not cause harmful interference.
(2) This device must accept any interference received, including interference that may cause undesired operation. -
Changes or modifications not expressly approved by the party responsible for compliance could void the authority to operate the equipment.
RF warning statement
The device has been evaluated to meet general RF exposure requirements. The
device can be used in portable exposure conditions without restriction.
Contact
МОКО TECHNOLOGY LTD. An original manufacturer of loT smart devices
Address: 4F, Building 2, Guanghui Technology Park, MinQing Rd, Longhua,
Shenzhen, Guangdong, China
E-mail:
Support_BLE@mokotechnology.com
Website: www.mokosmart.com
www.mokoblue.com
References
- Home | MOKOBlue: Original Bluetooth/BLE IoT & Smart Devices Manufacturer
- Your IoT Devices ODM & JDM Partner - MOKOSmart #1 Smart Device Solution in China
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>