KENRONE SL90 Keyless Portable USB Charging Fingerprint Lock Instruction Manual
- May 15, 2024
- KENRONE
Table of Contents
- KENRONE SL90 Keyless Portable USB Charging Fingerprint Lock
- Product Usage Instructions
- FAQ
- Introduction
- Product Introduction
- What’s in the box
- Fingerprint Reading
- Fingerprint Operation
- Factory Setup
- Charging Instruction
- Product Information
- Read User Manual Online (PDF format)
- Download This Manual (PDF format)
KENRONE SL90 Keyless Portable USB Charging Fingerprint Lock
Specifications
- Unlock Method: Fingerprint
- Capacity: 50 fingerprints (2 admins & 48 users)
- Charging Type: Micro-USB
- Standby Time: 1 year
- Material: Zinc Alloy
- Size: 79.2 x 50.0 x 14.5mm
- Waterproof Grade: IP66
- Unlock Times with Full Power: 10,000 or more
Product Usage Instructions
1. Register 2 Admin Fingerprints
To begin, it is essential to register two administrator fingerprints, which will be utilized for the fundamental operations of the lock.
- Step 1: Position any finger on the sensor to unlock and maintain placement until the blue light flashes.
2. Add User Fingerprint
To add a user fingerprint:
- Step 1: Unlock the lock using one of the admin fingerprints. After unlocking, maintain your finger in position until the blue light flashes.
- Step 2: Press the chosen user fingerprint on the sensor six times, slightly adjusting its position with each press. When the green light turns on, it signifies the successful registration of the user fingerprint.
3. Delete User Fingerprint
To delete a user fingerprint:
- Step 1: Unlock the lock using one of the admin fingerprints. After unlocking, press and hold the admin fingerprint for 10 seconds until the red light flashes.
- Step 2: Press the registered user fingerprint you wish to delete. Once the green light is on, the verification is successful, and the user fingerprint is deleted.
FAQ
- Q: How many fingerprints can be registered?
- A: The lock can store up to 50 fingerprints, including 2 administrators and 48 users.
- Q: What is the charging type for the lock?
- A: The lock uses a Micro-USB charging type.
Introduction
Dear customer,
Thank you for purchasing our product. To ensure proper usage of this product, please carefully read this manual before using it. If you have read the entire manual, we recommend keeping it in a safe place for future reference. This will be beneficial for your continued use of the product. In the initial state, any fingerprint can unlock the lock. However, once a fingerprint is registered, the lock will only respond to registered fingerprints and not unlock with any other unregistered fingerprints.
Product Introduction
Components
- Lock Shackle
- Lock Body
- Indicator Light
- Fingerprint Reader
- Mirco-USB Charging Port
What’s in the box
Fingerprint Reading
Correct reading
Wrong reading
Note:
- When registering the fingerprints, make sure to position them correctly on the sensor as illustrated above, varying the singer’s position slightly in each of the six takes. Excessively dry, dirty, or worn fingers can lead to incorrect readings.
- If the LED lights up in red during the process, move your finger and try again.
- In the event that no fingerprint is pressed during the 30-second registration window, the process will close automatically. To proceed, simply restart the registration
Fingerprint Operation
Register 2 Admin Fingerprints
To begin, it is essential to register two administrator fingerprints, which will be utilized for the fundamental operations of the lock.
- Step 1:
- Position any finger on the sensor to unlock and maintain placement until the blue light ashes.
- Step 2:
- Choose the name you want to set as the admin fingerprint. Press it six times on the sensor until the green light appears, slightly adjusting the anger each time. Your 1st admin fingerprint has now been successfully registered.
- Step 3:
- Repeat the procedure for the second finger, which may belong to another person. Press the chosen finger six times on the sensor until the green light turns, signifying the successful registration of the 2nd admin fingerprint has been successfully registered.
Add User Fingerprint
To operate the lock, it’s possible to add up to 50 user fingerprints, which can belong to different individuals. Let’s explore how to do it:
- Step 1.
- Unlock the lock using one of the admin fingerprints. After unlocking, maintain your finger in position until the blue light flashes.
- Step 2.
- Press the chosen user fingerprint on the sensor six times, slightly adjusting its position with each press. When the green light turns on, it signifies the successful registration of the user fingerprint.
Delete User Fingerprint
- Step 1.
- To delete one of the user fingerprints, unlock the lock using one of the admin fingerprints. After unlocking, press and hold the admin fingerprint for 10 seconds, keeping your finger in place until the red light flashes.
- Step 2.
- Press the registered user fingerprint you wish to delete. Once the green light is on, the verification is successful, and the user fingerprint is deleted.
Factory Setup
If necessary, all registered fingerprints can be erased to restore the lock.
- Step 1:
- Unlock the lock using one of the admin fingerprints. After unlocking, press and hold the admin fingerprint for 10 seconds. Do not remove your finger until the red light flashes.
- Step 2.
- After the red light flashes, press one of the admin fingerprints again. When the green light turns on, it signals a successful reset to the factory setup. This action clears all fingerprints stored in the lock, allowing you to unlock the padlock with any
Charging Instruction
- Low Power:
- The red light will flash three times after unlocking when the battery is low.
- In Charging:
- The red light will remain continuously lit when the lock is being charged.
- Fully Charged:
- The light will be turned off when the battery is fully charged.
Product Information
Product specifications
- Unlock Method: Fingerprint
- Capacity: 50 fingerprints (2 admins & 48 users)
- Charging Type: Micro-USB
- Standby Time: 1 year
- Material: Zinc Alloy
- Size: 79.2 x 50.0 x 14.5mm
- Waterproof Grade: IP66
- Unlock Times with Full Power: 10,000 or more
Technical specifications
Power Supply | Lithium Battery 250 mAh |
---|---|
Static Current | ≤30uA |
Dynamic Current | ≤250mA |
Drive Method | Motor |
Stall Current | ≤300mA |
Alarm Voltage | ≤3.5V |
Working Temperature | -20℃ ~ 60℃ |
Storage Temperature | -20℃ ~ 60℃ |
Working Humidity | 10%~90%RH |
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>