BURNLAB A5 10W Air Assist Kit User Manual

BURNLAB A5 10W Air Assist Kit

USER MANUAL

Note: The picture is for reference only, the actual product shall prevail.

For more information, please scan the QR code

Parts List

This is parts collection for various models, not each model will use all parts in the sheet.

Installation of Air Guide Hood for Four Models

• BURNLAB A5 10W
• BURNLAB A5 20W
• BURNLAB A5 30W
• BURNLAB A5 Pro

Installation of Air Guide Hood for Eight Models

• BURNLAB A5
• M50 Pro
• BURNLAB P9 M40
• BURNLAB X7 Pro
• BURNLAB P9 M50
• BURNLAB A10 PRO
• BURNLAB A5 M50
• BURNLAB S10 Pro
• BURNLAB X7

1. Remove the set screw from the right side of the laser and remove the current filter glass or acrylic shield.
2. Remove the current air guide hood.
3. Find NO.1 and NO.1-2 from the accessories and install them at the same time as shown.
4. Fix the air guide hood as well as the filter glass.
5. Insert the tube

If your model is BURNLAB A5 Pro+ or BURNLAB P7 M40, you need to choose one of the following 2 combinations to support your model.

Equipment installation and use

Precautions for Use

After using the air guide hood of air assist ,please clean the adhesions on the air outlet to prevent from accumulating for a long time to affect the further use.

Specifications:

• Pump
• Power Adapter
• Trachea
• M3 self-tapping screws
• Set screw
• Inner hexagon screwdriver
• PH1 Phillips screwdriver
• Foot pad 2pcs
• NO. 1 2pcs
• NO. 1-1
• NO. 1-2
• NO. 1-3
• NO. 2
• NO. 2-1

Installation of Air Guide Hood for Four Models:

1. Remove the current acrylic shields.
2. The air guide hood tube mouth is on the left.
3. Remove the set screw.
4. Rotate the current air guide hood counterclockwise to remove it.
5. Find NO.1 from the accessories. Install it as shown.
6. Tighten the self-tapping screws with a PH1 Phillips screwdriver.
7. Find NO.1-1 from the accessories and install it as shown.
8. Insert the tube and fix it with a tie.

Installation of Air Guide Hood for Eight Models:

1. Remove the set screw from the right side of the laser and remove the current filter glass or acrylic shield.
2. Remove the current air guide hood.
3. Find NO.1 and NO.1-2 from the accessories and install them at the same time as shown.
4. Fix the air guide hood as well as the filter glass.
5. Insert the tube.

Equipment Installation and Use:

1. Tear off the adhesive protect paper from the silicone pad, align the positioning posts on the silicone pad with the mounting holes on the pump, and paste the silicone pad to pump body.
2. Insert the air tube into the air pump port.
3. The tube on the machine needs to be fixed with the connecting line by the nylon tie. Be careful not to fix it too tight to block the tube.

Precautions for Use:

• Be careful not to get the tube stucked by the wheels.
• Please do not bend the tube too much to avoid blockage.
• Clean the adhesions on the air outlet after using the air guide hood to prevent accumulation and ensure proper functioning.

FAQ:

Q: How do I choose the correct combination for BURNLAB A5 Pro+ or

BURNLAB P7 M40 models?

A: For these models, choose one of the following combinations based on matching wind deflectors to ensure proper assembly.

Q: What should I do if I encounter issues with air flow?

A: Check that all connections are secure and free from blockages. Ensure proper installation of components as per the user manual.

Customer Service:

ØFor technical support and service,please email:
burnlab.official@outlook.com

Manufacturer: Shenzhen AtomStack Technologies Co., Ltd.
Address: 17th Floor, Building 3A, Phase II, Intelligent Park, No. 76,
Baohe Avenue, Baolong Street, Longgang Dist., Shenzhen, 518172,
China

Scan the code to enter the discussion group.

Scanner APPLICATION:
QR code reader/ Barcode scanner or any APP with scanner.

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>