Migipaws B0BYN6ZJGC Intelligent Pet Toy Instruction Manual

Table of Contents

This product has four playing modes:

When placed on the ground, it can be used as a fixed-position teasing stick for cats. The teasing stick is equipped with bug galls and feathers, and cats can play with the teasing stick on their own without the need for manual control by humans.
This product comes with a catnip ball and cat scratch itch, which can be used as a fixed-position scratching area. Cats can scratch and play with the catnip on their own without the need for additional scratching products.
This product is an intelligent pet toy that can sense and interact automatically. After the toy is turned on, when it senses a cat approaching, the cat can play with the two irregularly moving small balls built into the product; when the cat walks away, the product stops working.
The packaging that comes with this product can be folded into a cat bed for the cat to rest in.

Migipaws-B0BYN6ZJGC-Intelligent-Pet-Toy-fig-4

Note

This product is for pet use only and should not be used for any other purpose.
Please check for any damage before use
Keep the toy clean and dry before installation.
If the product is overloaded (7KG), it may be damaged, so use it with caution.
This product is a pet toy, not a toy for children. Do not let children play with it. If children operate it, there must be a guardian present.
Do not let your cat swallow this product.
If there is any swelling or component detachment, please contact customer service or the official account for after-sales service immedi- ately and do not continue to use it.
Supervise your pet while playing with this product.

Catnip Ball – the scratch board contains a 30mm diameter catnip ball, which can be licked by cats.
Cat Scratch Itch – can be removed for easy cleaning of pet hair and product cleaning.

Migipaws-B0BYN6ZJGC-Intelligent-Pet-Toy-fig-6

Removable Teasing Stick – can be held by hand as a teasing rod or placed on the product as a matching toy

Migipaws-B0BYN6ZJGC-Intelligent-Pet-Toy-fig-7

Matching EV A balls (4) – placed inside the product for use with the product.

After the packaging is opened, it can be folded into a cat bed for the cat to rest and play.

Open the packaging and remove the product, then stand up both sides of the packaging page.

Migipaws-B0BYN6ZJGC-Intelligent-Pet-Toy-fig-12

Fold both sides of the packaging page along the crease and fasten the paper clip to the paper seam.

Remove the attached transparent circle buckle and fix it in the two holes on the front of the packaging.

Migipaws-B0BYN6ZJGC-Intelligent-Pet-Toy-fig-2

The product has a three-position switch. Turn on the switch to start.

Switch to the “sun” position, the LED light will turn on, and the motor will randomly rotate. During this time, the LED light will gradually brighten and dim. The product will work for about 5 minutes before stopping. To work again, trigger the sensor to activate the mechanism.
Switch to the “ON” position, the LED light will not turn on, and the motor will randomly rotate. The product will work for about 5 minutes before stopping. To work again, trigger the sensor to activate the mechanism.

Migipaws-B0BYN6ZJGC-Intelligent-Pet-Toy-fig-3