STANBOW B07H3TT4GQ 1:28 RC Stunt Car Instruction Manual
- June 4, 2024
- STANBOW
Table of Contents
STANBOW B07H3TT4GQ 1:28 RC Stunt Car Instruction Manual
Thank you for purchasing one of our toy products. To ensure that you get the most out of your new purchase, please read these instructions carefully before using the toy for the first time. They contain important information on how to operate the product.
Caution:
-
Electrical products
This product is not suitable for children aged 6 or under. When using electrical products, precautions must be taken to prevent the risk of an electric shock. -
Ensure adult supervision at all times
Warning: Do not attempt to modify or re-assemble this product. Unauthorized changes may void your right to use the product.
Charging the batteries
- Insert the USB plug into an indoor USB power supply, and then connect the battery compartment to the charging cable.
- A full charge takes 90 minutes. When charging, the LED indicator light turns into red. when charging completes the LED indicator light stays off.
- Regularly inspect the toy, battery charger, charging cable, connectors and other components for signs of damage. In the event of any damage, discontinue use and send the parts for repair.
Calibrating the vehicle
Instructions:
- Check that the ON/OFF switch is in the ON position. The vehicle will not respond to the remote control when the switch is in the “OFF” position.
Inserting the remote control batteries
- Observe the polarity markings on the battery compartment to ensure that the batteries are inserted in the correct polarity.
- Attach the cover to the battery compartment as shown in the diagram below.
- Insert rechargeable batteries into the battery compartment.
- Use a screwdriver to secure the battery compartment cover in place.
Inserting the battery compartment into the vehicle
Basic Controls
-
Push both throttle joystick upward to make the vehicle move forward.
-
Pull both throttle joystick downward to make the vehicle move backward.
-
Push the left throttle joystick upward and pull the right throttle lever downward to make the vehicle spin clockwise.
-
Pull the left throttle joystick downward and push the right throttle lever upward to make the vehicle spin counter clockwise.
-
Push the left throttle joystick upward to flip the wheels and make the vehicle move forward.
-
Pull the left throttle lever joystick downward to flip the wheels and make the vehicle move backward.
Using the vehicle
- Switch on the vehicle using the ON/OFF switch.
- Use the throttle levers on the remote control to make the vehicle move forwards, backwards, left or right.
- Switch off the vehicle and remote control after use.
Battery safety information
- The batteries must only be charged under adult supervision.
- Before charging the batteries, remove the battery compartment from the vehicle chassis.
- Remove empty batteries from the vehicle and remote control.
- Ensure that the vehicle is switched off before inserting the batteries.
- Ensure that the batteries are inserted in the correct polarity (observe the + and – markings on the battery compartment).
- Do not attempt to charge non-rechargeable batteries.
- Do not short circuit the battery terminals.
- If you do not plan to use the vehicle for an extended period, remove the batteries from the vehicle and remote control to prevent leakage.
- Do not throw batteries into open flames, as this may cause them to explode or leak.
- Do not mix old and new batteries or batteries from different manufacturers.
- Only use batteries from recommended or reputable manufacturers.
- Regularly inspect the batteries for signs of leakage.
- Keep this instruction manual in a safe place for future reference. It contains important information on how to use the product safely.
Care and maintenance
- Remove the batteries when you do not plan to use the toy for an extended period.
- Use a damp cloth to wipe the vehicle clean.
- Do not expose the toy to high temperatures, moisture or direct sunlight.
- Do not immerse the toy in water, as this may damage the electrical components.
Caution
Do not touch the wheels when the vehicle is moving, as this may damage the
vehicle.
Do not use the vehicle next to roads or other hazards, as this may cause an
accident.
Do not use the vehicle in puddles, mud or sand.
FCC Statement
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:
- This device may not cause harmful interference, and
- this device must accept any interference received, including interference that may cause undesired operation.
NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.
WARNING: Any changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate this equipment.
The device must not be co-located or operating in conjunction with any other antenna or transmitter.