EVILTO B07H3L62BJ USB Charger Ports Digital Mirror Alarm Clock User Manual
- May 15, 2024
- EVILTO
Table of Contents
EVILTO B07H3L62BJ USB Charger Ports Digital Mirror Alarm Clock
Specifications
- Projection Alarm Clock
- LED Display
- Radio Function
- Backup Battery for Time and Alarm Settings
- USB Charging Port
- Sleep Timer Feature
Product Usage Instructions
Start-Up
- Remove the plastic insulator tab from the button battery compartment at the back.
- Connect the power cable to the jack at the back of the clock.
- Plug the power cable into a socket to turn on the LED display.
- Note: The LED screen won’t display when power is off, and functions like radio and alarm won’t work without power.
Setting the Alarm:
- Press the “SNOOZE” button to set snooze time between 5 to 60minutes.
- Use the “/project” buttons to select alarm mode (rd for wake-to-radio, bu for wake-to-buzzer).
- To set a second alarm, repeat steps 2-6 with “ALARM 2″displayed.
Sleep Timer:
- Press “RADIO/SLEEP” twice to enter sleep mode, displaying sleepicon “SL” and a default sleep time of 5 minutes.
- Press “RADIO/SLEEP” to adjust sleep timer from 5 to 90 minutes or OFF.
- The radio will automatically shut off after the set sleep time.
Projection Function:
- To turn on projection, press the “/project” button (Note: No projection function in battery-powered mode).
- Hold “/project” to revolve the projection view and long-press to rotate it 180 degrees.
Charging:
- Connect your mobile phone charging cable to the USB port at the back of the unit.
- Connect the other end to your mobile phone for automatic charging.
- Note: Use the original mobile phone cable for charging and charging may take a while.
Restore Factory Default:
If a time error occurs due to interference, remove the power supply and backup battery. The clock will restore to Factory Default when powered back on
All safety and operation instructions should be read thoroughly before proceeding and please keep the manual for future reference.
UNIT FEATURES
STARTUP
Please remove the plastic insulator tab from the button battery compartment in
the back connect the power cable to the jack in the back of the clock and then
plug the power cable into the socket. The LED display turns on.
Note: When the power is off, the LED screen won’t show, and the radio and
alarm cannot work. The backup battery only retains the basic settings of time
and alarm.
SETTINGS
Time Setting
- Press and hold the “SET” button 3 seconds, the display screen shows “24H” and flashes, press “▲/project” or “▼” to select “12H” or “24H”.
- Press “SET” again, and the hour digits flash, press “▲/project” or “▼” to set the hour. ( Long press “▲/project” or “▼” will accelerate setting at high speed.)
- Press “SET” again, and the minute digits flash, press “▲/project” or “▼” to set the minute.( Long press “▲/project” or “▼” will accelerate setting at high speed.)
- Press “SET” or without any operation within 10 seconds, it will exit the current setting mode.
Note: When the 12- 12-hour time format is selected, the “PM” icon will appear on the screen in the afternoon. Press and hold the “▲/project” 3 seconds to switch from “12H” and “24H” format.
Alarm Setting
- Short press “▼” once to turn on/off the alarm. The sequence is Alarm 1 ON – Alarm 2 ON -Alarm 1 OFF – -Alarm 2 OFF (Circulation).
- Short press “AL” once to select the alarm ( There are“AL” icons on the bottom of the display, the sequence is Alarm 1– Alarm 2, and the“AL” icon is flashing).
- After selecting the alarm ( the related “AL” icon is flashing), Press and hold “AL” for 3 seconds to enter setting mode. The sequence is “Hour”–“Minute”- “Snooze time”- “Alarm mode”. (The setting object is flashing).
- Adjust the value using “▲/project” or “▼”, after setting press “AL” once to confirm and enter another mode.
- The default Snooze time is 5 minutes, the “05” icon is flashing (representing 5 minutes), and short press “▲/project” or“▼” to set it from 5 to 60 minutes snooze time.
- Press“▲/project” or “▼” to select alarm mode (“rd”= wake-to-radio,“bu” = wake-to-buzzer, when“rd” or“bu” is selected, the related alarm will turn on).
- If you need a second alarm, please repeat steps 2-6 (Note: Second alarm clock reflects“ALARM 2” on the display screen).
Alarm ON/Alarm OFF
- 1. When an alarm is set, there will be an “ALARM 1” or an “ALARM 2” icon on the bottom of the display. When alarm 1 or 2 is sounding, the related icon flashes, press “ SNOOZE/LIGHT” once, the alarm will be silent and come on again after the setting snooze duration.
- Press any other buttons except the “SNOOZE/LIGHT” one time to stop the alarm and it will sound on the following day. The related icon won’t disappear.
- If your second alarm activates while the first alarm is sounding or it is in the snooze mode, the second alarm will override the first alarm (the first alarm is reset to come on the next day).
- If you select the radio as the alarm tone. The station and volume of the radio will be the same as you played last time.
- The radio alarm will keep playing until the user presses to stop it.
Program the Radio
FM Setting
- Press “RADIO/SLEEP” once to play the radio, and the display shows “ON” and then the radio frequency readings in Mhz (From 76.0 Mhz — 108 Mhz).
- Press“SET” briefly, and FM radio will scan and automatically save the frequency of 01,02,03…..It will stay on the first station once the scan is completed.
- Press“▲/project” or“▼” to choose stored station.
- To adjust the volume, press “VOL” briefly, and the display shows “L10”, press“▲/project” or “▼” to adjust the volume from L00 (minimum) to L15 (maximum).
- Press “SNOOZE/LIGHT” to turn off the radio.
Note: Keep your radio away from interference sources or other electronic devices, which may cause interference to the radio.
Sleep Timer
- Press “RADIO/SLEEP” twice to enter the sleep mode, then the sleep icon“SL” and sleep time “05” (representing 5 minutes) appear on the display.
- Then press the “RADIO/SLEEP” to adjust the sleep timer from 5, 10, 15, 30, 45, 60, 75, 90 or OFF.
- When the display changes back to show the time, press the “RADIO/SLEEP” twice to show the sleep time remaining.
- The radio will play for the programmed sleep time and then shut off automatically.
Use Projection
- In the clock mode, press“▲/project” once in the AC mode to turn on the projection (bright), then press again to adjust the brightness of the projection. ( From bright–slightly bright- off, default is off)
- When the projection is on, press and hold“▲/project”to revolve the projection view. Long press the project key to rotate the projection 180 degrees.
Note: There is no projection function in battery-powered mode.
Brightness Control
In the clock mode, Short press“SNOOZE/LIGHT”to adjust the brightness of the
LED display.
- Bright (default) — Slightly Bright — Dim — Off.
- Press and hold the “SNOOZE/LIGHT” for 3 seconds to select the on/off of Auto mode. If selecting “ON” means that the LED display automatically enters into the low brightness mode in the dark environment; if selecting “OFF” it can only control brightness manually (default is “OFF”).
Note: This can only be done when the radio is off and the unit is not sounding.
Night Mode
- Night mode means that the LED automatically enters into the low brightness display status at night or preset period.
- Short press“SET” to enter into night mode (the default is “OFF”), and Switch the value using “▲/project” or “▼”, if selecting “ON” means that night mode turns on, during the period of 18:00 to 6:00 the next day, it will automatically enter into low brightness display status.
- When night mode is“ON”, press and hold “SET” for 3 seconds to enter interval time setting mode. The setting sequence is:“start hour”–“start minute”-“end hour”–“end minute”. At the start hour and minute setting status, the upper point in the center of the green is long and bright. At the end hour and minute setting status, the lower point in the center of the screen is long and bright.
Note: If Automatic dimming is enabled, the Night Mode will not work.
Displays of Thermometer &Humidity
- The default unit of temperature is °C.
- Press and hold“▼” for 3 seconds to switch the unit from °C to °F.
- Indoor Temperature range: 32°F — 122°F (0°C–50°C).
- Indoor Humidity range: 20%–95%.
Charging
Connect the charging cable of your mobile phone to the USB port at the back of
the unit, then connect the other end to your mobile phone or other equipment.
The clock will charge the mobile phone automatically.
Notes
- Use the original cable of your mobile phone for charging.
- Charging with this USB jack may take a long time.
RESTORE FACTORY DEFAULT
If the time error occurs, it may be subject to other equipment’s electrostatic
interference. To resolve this, you can remove the power supply and the backup
battery, then the clock can be restored to the Factory Default. Repower on the
clock and set the function.
PRECAUTION
- Do not place the electronic clock in a high-temperature, water, or direct sunlight environment.
- When placing the clock on the furniture, use a cloth or other protective material to keep it away from the furniture.
- If necessary, use a flannel with a little soapy water to clean the clock. Substances such as gasoline, thinner, or similar liquids will damage the clock’s surface. Cut off the power before cleaning
- If you don’t use this clock for a long time, such as a month or even longer, remove the battery to prevent the clock from being corroded; if the battery compartment is corroded or dirty, clean and replace the battery in time.
- Do not disassemble this product.
FAQ
- Q: What should I do if the LED screen doesn’t display?
- A: Ensure the power cable is properly connected and plugged into a socket. Check if the backup battery needs replacement.
- Q: How do I change the alarm settings?
- A: Use the “SNOOZE” button to adjust the snooze time and the”/project” buttons to select alarm mode. Repeat the steps for setting second alarm.
Read User Manual Online (PDF format)
Loading......