POPULIFE E1 Electronic Keybox User Guide

POPULIFE E1 Electronic Keybox

Product Information

Specifications

• Model: Populife Electronic Keybox
• Dimensions: mm
• Material: [Specify material]
• Weight: [Specify weight]
• Batteries: AAA Batteries
• Unlock Mechanism: Keypad
• Water & Dust Proof
• Drop Test: [Specify if applicable]
• Working Temperature: [Specify temperature range]

Product Usage Instructions

Components Overview

• Populife Electronic Keybox x 1
• Rubber mat x 1
• Rubber ring x 4, Rubber stopper x 6
• Screwdriver x 1
• Battery cover screws x 1
• Self-tapping screws x 4
• Expansion screws x 4

Identification

• Buckle
• Keypad
• Backspace Button
• Unlock Button
• Emergency Power Supply Terminal

Battery Installation

1. Open the battery cover with the provided screwdriver.
2. Insert the AAA batteries.
3. Screw the battery cover back on.
4. Place the rubber ring around the screw holes for water protection.

Factory Default Mode

1. Insert AAA batteries following instructions.
2. Touch the keypad to wake up the Keybox.
3. Enter default passcodes and end with [specified action].
4. You will hear a long beep indicating activation.

Lock Operation

• Automatic Locking: Keybox locks itself in 30 seconds if unlocked.
• Manual Lock: Long-press [specified button] to lock manually.

FAQ

Q: How do I reset the Keybox to factory mode?

A: Long-press the Reset button until two short beeps to restore it to factory mode.

Components Overview

Identification

• Model: E1
• Dimensions: 195(H) x 66(W) x 42(T) mm Inner space of shackle 60(W) x 35(T) mm
• Material: Zinc Alloy, Steel, Silicon Rubber, Engineering Plastic
• Weight: 605g
• Batteries: 4 x AAA (Not included)
• Unlock Mechanism: PIN code
• Water & Dust Proof: IP 66
• Drop Test: 1 meter
• Working Temp: -13°F ~ 131°F

Battery Installation

Mount it on a surface if needed

Hang it on the doorknob

Factory Default Mode

1. Open the battery cover with the provided screwdriver and insert 4 AAA batteries as described on page 3. Alkaline batteries can provide better battery life.
2. Touch the keypad to wake up the Keybox, enter the default passcodes 1234 and end with “ ”. You will hear a long beep sound suggesting the Keybox is activated.

NOTE:

1. Keep the Keybox open after powering it on until you set your own administrator passcode.
2. If you enter ‘1234’ and hear four beeps, use the reset button shown on page 3. Long-press the reset button until you hear two short beeps, indicating that the Keybox has been reset and restore to factory mode.

Automatic locking
If the Keybox is unlocked but remains closed, it will automatically lock itself in 30 seconds.

Manual lock
You can long-press the “ ”, on bottom right of the keypad to lock manually.

Lock Operation

Change Master PIN Code

1. Press “<” twice
2. Enter Master PIN Code end with “ ”
3. Press “1”
4. Enter NEW Master PIN Code end with “ ”
5. Enter the same New Master PIN Code end with “ ”

Add User PIN Code

1. Press “<” twice
2. Enter Master PIN Code end with “ ”
3. Press “2”
4. Enter NEW User PIN Code end with “ ”
5. Enter the same New User PINCode end with “ ”

Enable/Disable Beeper

1. Press “<” twice

2. Enter Master PIN Code end with “ ”

3. Press “4”

4. To enable the beeper: Press “1”
   To disable the beeper: Press “2”

5. Press “ ”

Enable/Disable Auto Re-lock

1. Press “<” twice

2. Enter Master PIN Code end with “ ”

3. Press “5”

4. To enable the auto re-lock: Press “1”
   To disable the auto re-lock: Press “2”

5. Press “ ”

References

• Populife Smart Keybox & Smart Lock | Make Every Entry Smart

Read User Manual Online (PDF format)

Download This Manual (PDF format)

Download this manual  >>