Church Depository Drop Safe Box for Business Instruction Manual
- May 15, 2024
- Church
Table of Contents
Church Depository Drop Safe Box for Business
COMPONENT DESCRIPTION
- LCD Display Screen
- Digital Keypad
- Hidden Keyhole
- Knob
- Internal Battery Compartment
- Reset Button
Screen display identification
- Password correct unlock icon display
- Password error or lock screen is displayed by pressing key Icon
- The reminder icon is displayed when the battery is low
The first opening
For the first opening, please take off the cover (on the middle of keypad), then take out the emergency key from the plastic bag, Insert the key vertically into the lock hole and turn it counterclockwise to the horizontal position, then turn the knob clockwise to open the door. After that, put 4 batteries of AA in the battery box (on the back of the door), then leave the door open and take the keys out.
- Remove the emergency cover in the middle of the panel.
- Insert the emergency key counter-clockwise as shown
- Turn the knob to open the door
WORKING CONDITION
- Working power supply: four 1.5V AA alkaline batteries. Under-voltage ( voltage less than 4.8 0.3V) will affect the magnet suction
- Working voltage range : DC 4.2-7.5V
- Working current: <350mA
- Static current: <35uA(@)6.0V)
- Use ambient temperature: 0-50 °C
Please keep the emergency keys out of the safe
Open the door
- Input your personal code, then press “#” to confirm, the green unlock Icon light will be on.
- In 5 seconds.rotate the knob and pull out, the door will be opened.
- Close the door, then rotate the knob left anti-clockwise to lock the safe.
Initial password: 159+”#”
SET THE CODE
- Set or change the personal code
- While the door is opened, press the reset button( on the left-side of back of door), then input any l-8 digits you want, press”#” to confirm, indicating that the new code has been accepted and stored.
NOTICE
- If you enter the wrong password during the process of entering the password, you can press the”*” key to clear (clear all previous operations) and re-enter2
- If 3 incorrect codes input continuously, the keypad will be blocked about 20 seconds; If another 3 incorrect codes input again , then the keypad will be blocked for another about 20 seconds ,and so on.
- If the battery depletion icon appears on the screen during operation, indicating that the battery is low, please replace the battery as soon as possible.
- If you forgot the code or the batteries are run off, use the emergency key to open the safe as the first opening, and then press the reset button(on the left-side of back of door) to reset the code.
- Any key pressed for 20 seconds, no subsequent key input into the sleep state, the front input cleared.
- The electronic part of the electronic safe will be short-circuited when it encounters liquids, and the product can not be placed in a humid environment. It is easy to cause the risk of circuit back-moistening and failure.
RECOMMENDED FIXATION METHOD
Packing accessories
Please keep the emergency keys out of the safe
CONTACT US:
If there is any problem about your item, please contact us with order number
and product pictures through the following email, we will offer you help.
Email : service@)nicesafebox.comnicesafebox.com)
Read User Manual Online (PDF format)
Loading......