Brightech Luna Floor Lamp Instruction Manual
- May 15, 2024
- brightech
Table of Contents
Bluebee Operating Instructions
Pairing devices
| Scan QR code to download Bluebee app| Android download address
---|---|---
Bluebee| 
| BlueBee Smart
https://app1306997973.file.myqcloud.com/
bluebee/BlueBeeSmart_v2.0.18.2%2825%29.apk
Bluebee is using Bluetooth communication protocol, no gateway required. In
order to protect the security of personal information, the account login
method has been eliminated and become localized control.
The devices can only be controlled locally, Cannot be operated remotely.
The operation instruction as below:
Create a home network
Click network–Click network management–Click create network –enter name and password as wish–Finished
Connecting the lamp
- Power up the lamp and checking if it’s flashing（flashing indicates the lamp is in the pairing state and you can process to the next step, if the lamp is steady on, you will need to reset the lamp and make it into pairing state.）
- Click light page–Click plus icon–Select the type of device–Click the device ID and confirm.
- How to reset the lamp：Turn the power switch on and off three times, make the lamp flashing（There is electrolytic storage inside the power supply, need to extend the light off time, reserve time for electrolytic discharge to ensure the lamp switch normal) （Operation mode: the lamp power off for 30 seconds—turn on the light—turn off the light for five seconds—turn on the light—turn off the light for five seconds—turn on the light— the lamp is flashing and in pairing states）
Share the network
Click ”mine” page–Click network management–Click the network you would like to
share–Click scan the net–Scan shared network 
PS： Bluebee is using Bluetooth protocol, only close to the lamp
can join the home network to control it.
（Distance approx. 8 m, actual distance depends on definition of space
barrier）There are two ways to enter the network, getting the password or
through the QR code sharing into the network
Sunttro lamp function
- Click on the three dots in the upper right corner to enter the device control.
- Long press the device name for 3 seconds–Click Edit to enter the settings page（can set up the group and biological rhythm）
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>