HELDER FPTM-70 Portable Tripod Stand with TV Mount User Manual
- May 15, 2024
- HELDER
Table of Contents
FPTM -70
Portable Tripod Stand with TV Mount
for 37 to 70 in. Displays
FPTM-70 Portable Tripod Stand with TV Mount
Thank you for choosing Helder
The Helder Portable Tripod Stand with TV Mount provides adjustable height and
tilt angles to offer the optimal view of a flat-panel display in a conference
room, department store, or trade show. It accommodates displays with screen
sizes measuring 37 to 70 inches and features universal VESA mounting. The
sturdy steel construction supports a maximum weight of 77 pounds and is
secured by two locking knobs and a security pin. This stand is quick to set up
and take down so you can easily move your display from one location to
another.
If you have safety concerns about installing this product, contact a qualified
professional or installation contractor. If this product is missing hardware
or there are defective parts, call Customer Service at
212-594-2353.
Product Specifications
Compatible Flat Panel Display Size: 37 to 70 in. (94 to 177.8 cm)
Max Height: 73.5 in. (186.7 cm)
Min Height: 48.5 in. (123.2 cm)
Max Weight Capacity: 77 lb. (34.9 kg)
Material: Steel
VESA Mounting Patterns:
200×200 mm
300×300 mm
400×200 mm
400×400 mm
600×400 mm
Weight: 10.1 lb. (4.6 kg)
Base Diameter: 42 in. (106.7 cm)
Safety Warnings
When installing this product, be sure to refer to the assembly instructions
detailed in this manual; failure to abide by the assembly instructions may
void the product’s warranty.
Do not use this product for any flat panel display other than what it is
intended for; the exact specification, size parameters, and weight limits are
found both on the product box and in the instruction manual.
Make sure the tripod legs are set to the widest position for stability and
utilize tripod weights or sandbags if you’re using a screen larger than 37
inches.
Do not use the tripod in a windy environment or place it on an uneven surface.
It is recommended that at least 2 people perform the installation process to
prevent injury from mishandling or dropping the product and/or flat-screen
device.
Make sure your fingers are protected and support the display when raising and
lowering the riser column.
This product may contain small parts which can pose a choking hazard; keep out
of reach of children and pets.
Excessive exposure to liquids may damage the finish of this product; when
cleaning this product, use only a mild detergent solution, and quickly wipe
dry with a soft cloth.
Helder takes no responsibility for any product damage or personal injury
resulting from mishandling, incorrect mounting, faulty assembly, or improper
use of this product.
All images are for illustrative purposes only.
Parts List
Setting Up the Tripod
Installing the Display Mount
Attaching the Display Brackets
Mounting the Display
Height Adjustment
Tilt Adjustment
One-Year Limited Warranty
This Helder product is warranted to the original purchaser to be free from
defects in materials and workmanship under normal consumer use for a period of
One (1) year from the original purchase date or thirty (30) days after
replacement, whichever occurs later. The warranty provider’s responsibility
with respect to this limited warranty shall be limited solely to repair or
replacement, at the provider’s discretion, of any product that fails during
normal use of this product in its intended manner and in its intended
environment. Inoperability of the product or part(s) shall be determined by
the warranty provider. If the product has been discontinued, the warranty
provider reserves the right to replace it with a model of equivalent quality
and function.
This warranty does not cover damage or defect caused by misuse, neglect,
accident, alteration, abuse, improper installation or maintenance.
EXCEPT AS PROVIDED HEREIN, THE WARRANTY PROVIDER MAKES NEITHER ANY EXPRESS
WARRANTIES NOR ANY IMPLIED WARRAN- TIES, INCLUDING BUT NOT LIMITED TO ANY
IMPLIED WARRANTY OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE.
This warranty provides you with specific legal rights, and you may also have
additional rights that vary from state to state.
To obtain warranty coverage, contact the Helder Customer Service Department to
obtain a return merchandise authorization (“RMA”) number, and return the
defective product to Helder along with the RMA number and proof of purchase.
Shipment of the defective product is at the purchaser’s own risk and expense.
For more information or to arrange service, visit
www.clearashelder.com or call Customer Service
at 212-594-2353.
Product warranty provided by the Gradus Group.
www.gradusgroup.com Helder is a registered
trademark of the Gradus Group.
© 2024 Gradus Group LLC.
All Rights Reserved. GG1
Documents / Resources
|
HELDER FPTM-70 Portable Tripod Stand with TV
Mount
[pdf] User Manual
FPTM-70 Portable Tripod Stand with TV Mount, FPTM-70, Portable Tripod Stand
with TV Mount, Tripod Stand with TV Mount, Stand with TV Mount, TV Mount
---|---
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>