AOCHUAN Smart X Gimbal Stabilizer for Smartphone Instruction Manual
- May 15, 2024
- AOCHUAN
Table of Contents
AOCHUAN Smart X Gimbal Stabilizer for Smartphone
Product Usage Instructions
Product List Check
Before use, ensure all items are present as per the product list in the
package. Contact customer service if any items are missing.
App and Tutorial
- Download App: Scan the QR code or search for ‘AOCHUAN’ on your mobile app store to download the official app for the gimbal stabilizer. Available for both IOS and Android.
- Watch Tutorial Video: Search and follow ‘AOCHUAN Gimbal’ for product tutorials and creative exploration.
Unfold and Fold the Gimbal Stabilizer
- Unfold: Extend the arm of the SMART X gimbal, mount your mobile on the clip, and adjust it level.
- Fold: Rotate the arm until in the same direction as the operation panel, then fold following the yellow arrow instruction.
Frequently Asked Questions (FAQ)
-
Q: How do I know when the battery is low?
A: When the battery is at 5% left, the PF indicator will flash twice intermittently. -
Q: How do I charge the battery?
A: Connect the Type-C cable to a power adapter via USB port and to the gimbal stabilizer. Lit indicators show charging status, while [ ] symbol indicates full charge.
Product List
Before use, please check the package carefully as per the product list. In case of missing, please contact the customer service or your agent.
- Phone Stabilizer *1
- Type-C Cable *1
- Tripod *1
- User Manual *1
App and Tutorial
Download App
Please download our official APP for gimbal stabilizer by scanning below QR
code or searching “AOCHUAN” on your mobile app store.
The APP is available for both IOS and Android system.
Watch tutorial video 
Search and follow”AOCHUAN Gimbal”,get product tutorials and explore the creative world together.
Unfold and fold the gimbal stabilizer
-
Unfold the gimbal stabilizer
Firstly unfold the arm of SMART X gimbal, then mount your mobile on the clip, next adjust it level. No need to unlock, easy to use. -
Fold the gimbal stabilizer
Rotate the arm of the gimbal until it is in the same direction as the operation panel, lock the tilt axis, then fold it as per the yellow arrow instruction until its mobile clip buckles in the fixing hole.
Introduction of SMART X
Introduction of the operation panel
Instruction of Modes
- PF : Fan-follow mode
- F : Full-follow mode
- L : Full-Lock mode
- POV : POV mode
Battery life instruction
When battery is 5% left, the PF indicator will continually flash twice in a little while.
Joystick: move up and down, left and right
- Single click : switch to PF/F/L/POV mode
- Double click : return to the initial position
- Triple click : inception mode
Long Press : power on/off
- Single click : switch to fill-light of stage 1/2/3/off successively
- Double click : check the battery life
Single click : camera/video
- Double click : switch to horizontal/vertical panel
Battery charging and replacement
- Battery charging
- Connect the equipped Type-C cable with power adapter via USB port and with gimbal stabilizer via Type-C port.
- When the indicators are lit up, it indicates charging status. When [ ] symbol appears, it indicates fully charged.
- Battery replacement
- The SMART X gimbal uses magnetic battery cover. To replace Li-battery, please open the magnetic cover and remove the used battery.
- Please use 18650 battery for replacement.
Parameters
- Above data stems from the testing data in the laboratory. The actual data is subject to vary to some extent under different testing conditions. Please refer to the real experience in gimbal use.
FCC Requirement
Any changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment. This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:
- This device may not cause harmful interference, and
- this device must accept any interference received, including interference that may cause undesired operation.
Note: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy, and if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.
Customer Support
Zhongshan Yang Guo Electronic Technology Co., Ltd.
- Address: NO.9 Huayuan Road, Xiaolan Town, Zhongshan
- City, Guangdong, China.
- Email : aochuan_gimbal@outlook.com
- Website : www.yg-free.com
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>