BLACKWELL Ring Sizer Instructions
- May 15, 2024
- Blackwell
Table of Contents
BLACKWELL Ring Sizer
Product Information
Ring Sizer Guide
The Ring Sizer Guide is a tool designed to help you accurately determine your ring size before making a purchase. It ensures that your ring fits comfortably and securely on your finger.
Specifications
- Material: Paper
- Size: A4
- Scale: 100%
Product Usage Instructions
- Print to Scale: Before measuring your ring size, print the guide on size A4 paper and ensure it is scaled to 100%. Check the accuracy by measuring the gold line – it should measure 10cm.
- Cut Out Ring Sizer: Once scaling is accurate, cut out the ring sizer using scissors.
- Make a Horizontal Slit: Create a horizontal slit along the dotted line indicated on the ring sizer.
- Wrap Around Finger: Place the ring sizer around your finger with the text facing outwards. Pass the end through the slit and adjust until it fits comfortably. Ensure you can remove it over your knuckle.
- Determine Ring Size: The letter that aligns with the edge of the tape indicates your ring size.
- Caution: Avoid pulling too tightly as it may lead to an inaccurate size. This guide serves as a reference; if unsure, consult before purchasing a ring.
FAQ
Q: How accurate is the ring sizer guide?
- A: The ring sizer guide provides a reliable estimate of your ring size when used correctly.
- It is recommended to follow the instructions carefully for accurate results.
Q: Can I use the ring sizer guide for all types of rings?
- A: The ring sizer guide is suitable for most standard ring types.
- However, for specialized or unique ring designs, it is advisable to consult with us for personalized guidance.
Ring Sizer Guide
PRINT TO SCALE
- Before measuring your ring size, make sure you have printed this guide on size A4 paper and scaled it to 100%.
- To check the accuracy of your printout, measure the line below. The scale is correct, if the gold line measures 10cm.
size
- Once you have ensured the scaling is accurate, cut out the ring sizer above using a pair of scissors.
- Make a horizontal slit along the dotted line, where indicated on the ring sizer.
- Wrap the ring sizer around your finger, with the text facing outwards. Pass the end through the horizontal slit and pull until it fits comfortably around your finger.
- Make sure you can remove the sizer over your knuckle.
- The letter, that lines up with the edge of the tape, is your ring size.
- Be careful not to pull too tightly as this will give an inaccurate size.
- Please note this is a guide only and if in any doubt before buying a ring, please consult us.
Read User Manual Online (PDF format)
Loading......