SOONBOX S9500 Portable Wireless Speaker User Manual

SOONBOX S9500 Portable Wireless Speaker User Manual

S9500
Wireless Speaker/ Portable Wireless Speaker

Technical specifications

Wreless standard:5.0
Transmission distance: 10 meters
Output power: 10W2
Playing fme:3-hours
Frequency effect: 80Hz~15KHZ
Speaker: 57mm, 4Ω 10W2
Input power:5V=1A
Maximum current consumption:2A
Battery type:18650 lithiumion battery 3600mAh
Power charging interface: type-c charging cable

Features

1. Wireless connection.
2. Memory function, breakpoint resuming.
3. Support U disk/TF card/AUX playback mode.
4. Built-in lithiumion battery.
5. Using high-fidelity speakers, the sound is more natural and delicate.
6. 1+1 device serial connection function.
7. FM radio function.

Button instruction

1. Play/Pause button:
   Single click: Play/Pause
   Double click in Bluetooth mode to call back;short press: answer/hang up in the case of an incoming call, long press 2 seconds to reject the call.
   Single click in radio mode: start/stop searching Radio stations.

2. Power Switch button:
   Long press 3 seconds to turn on/off the speaker.
   Single click: switch mode

3. Light button:
   Single click: switch light mode; Long press: turn on/off the light.
   Double click: TWS mode

4. Button +
   Signle click: Next song; Long press: Volume up.

5. Button –
   Signle click: previous song; Long press: Volume down.

6. TF jack: When inserting a TF card, the default is TF card playing mode.

7. Type-C jack:

8. Charging cable port, when inserting the Type-c charging cable, the device is charged by default.

9. When using the radio function, you need to insert the charging cable as a radio antenna and the radio function can be used normally.

10. USB jack: When inserting a USB flash drive, the USB playback mode is set to USB by default.

Directions for use

1. Wireless pairing
   Tum on the wireless device and search for the Bluetooth pairing name:
   S9500 Connect and pair.

2. Play instructions:
   Bluetooth search status: the white light flashes quickly. about 0.5 seconds/time.
   Bluetooth pairing status: the white light is always on; the playback status: the while light flashes slowly for about 1 second/time;

3. Charging indicator:
   Red light is on when charging, red light is off when fully chaned.

4. Voice prompt

5. Thers is a voice promot when tming on/off.

6. When the volume is increased the maximum volume, there is a volce prompt, and the minimum volume has no voce prompt.

7. When 3.4V low battery is detected, it will prompt3 shutdowns;

8. Mode swiching:

9. Turm on the Bluetooth mode by defaut,

10. Mode switching sequence: Blutooth mode-FM mode-TF card mode-U disk mode-AUX mode, mode post-insertion priority.

11. Volume requirements:
    The defaut volume at power-on is 70%

12. Powor saving function
    Automatic shutdown within 15 minutes without working.

Troubleshooting

1. Automatic shutdown: when the battery power is low, the battery pratection will be turned on automatically, please charge for 4 hours after use.
2. Cannot play music: The storage path of the music file cannot be recognized by the player, please store it in the root directory of the removable device.
3. There is no sound when connecting to the computer: the computer intertace is connected incorrectly, please select the correct audio output port.
4. There is no response to the keys or the function is in disorder: try again after shutting down.

Product warranty

User name:
Contact number:
Date of purchase:
Product number:
Maintenance failure:

FCC Statement

This device complies with part 15 of the FCC Rules.
Operation is subject to the following two conditions:
(1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.
Note: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications.
However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
— Reorient or relocate the receiving antenna.
— Increase the separation between the equipment and receiver.
— Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
— Consult the dealer or an experienced radio/TV technician for help.

Note: The Grantee is not responsible for any changes or modifications not expressly approved by the party responsible for compliance. such modifications could void the user’s authority to operate the equipment.

The device has been evaluated to meet general RF exposure requirement.
This equipment complies with FCC’s RF radiation exposure limits set forth for an uncontrolled environment. This device and its antenna(s) must not be co- located or conjunction with any other antenna or transmitter.

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>