GET Trakka GT-SENKIT-BUK-920 Reference Sensor User Manual
- June 11, 2024
- GET Trakka
Table of Contents
GET Trakka GT-SENKIT-BUK-920 Reference Sensor User Manual
Instructions
The reference sensor is a long-life version of the consumable sensor tag.
Designed for years of maintenance free continuous use in mining environments
it is installed directly onto production machinery such as Digger Buckets,
Truck Trays, and Engines etc. for continuous monitoring of assets in extreme
mining conditions.
The reference sensor is wirelessly transmitting data to the receiver via RF
transmissions and is activated/deactivated using the portable reader.
| GT-SENKIT-BUK-920 | |
|---|---|
| Operating Bandwidth | 920 – 925 MHz |
| Channels | 4 Selectable |
| Channel Spacing | 1 MHz |
| RFID Type | Active |
| Transmitter / Receiver / Transceiver | Transceiver |
| Transmission Power | 10 mW (Max) – Fixed |
| Transmission Time | 1.5 ms |
| Transmission Frequency / Period | 1.0 Hz / 1s |
| Duty Cycle | 0.15 % |
| Battery Type | Lithium Thionyl Chloride |
| Nominal Voltage | 3.6 V |
| Nominal Capacity | 19 Ah (10 years active tag lif e) |
| Product Operating Temperature | -10 to +90 °C |
| Dimensions | 118 mm W x 118mm H x 98mm D |
| Weight | 900g |
| Accessories | NA |
This equipment has been tested and found to comply with the limits for a Class A digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference when the equipment is operated in a commercial environment. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instruction manual may cause harmful interference to radio communications. Operation of this equipment in a residential area is likely to cause harmful interference in which case the user will be required.
Warning: Any changes or modifications not expressively approved by the
grantee could void the user’s authority to operate this equipme nt.
This equipment complies with the FCC radiation exposure limits set forth for
an uncontrolled environment. This equipment should be installed and operated
with a minimum distance of 20cm between the radiator and all persons during
normal operation.
For assistance, email support@crdigital.com or call (+61) 1300 33 8482