DESIGNHOUSE 589556 Oak Creek Uplight Wall Light Dusk to Dawn User Manual

DESIGNHOUSE 589556 Oak Creek Uplight Wall Light Dusk to Dawn

Product Information

Specifications:

• Product Name: LED Black Outdoor Wall Light
• Item Number: 589556
• Model: Oak Creek Uplight Wall Light Dusk to Dawn
• Power Supply: Min 90 supply conductors
• Usage: Outdoor

Product Usage Instructions

General Safety Precautions:

• Consult a qualified electrician to ensure correct branch circuit conductor.
• Turn off the main power at the circuit breaker before installation to prevent shock.
• All electrical connections must comply with local and National Electrical Code (N.E.C.) standards.
• If unsure about electrical wiring, seek the help of a qualified electrician.

Assembly and Installation:

1. Turn off the power at the fuse or circuit breaker.
2. Gently unpack all parts, ensuring nothing is missing per the installation instructions.
3. Remove screws from the top of the back plate and detach the mounting plate.
4. Securely attach the mounting plate to the Junction box using two junction box screws.
5. Connect the fixture wires to the supply wires as indicated in Fig.1, ensuring proper secure connections.
6. Turn on the power at the fuse or circuit breaker once installation is complete.

FAQ:

Q: What should I do if I am unsure about the electrical installation?
A: Consult a licensed electrician for assistance. You can also contact Customer Service at 1-800-558-8700 for further guidance.

LED BLACK OUTDOOR WALL LIGHT ASSEMBLY/INSTALLATION INSTRUCTIONS

Item # 589556: OAK CREEK UPLIGHT WALL LIGHT DUSK TO DAWN
Please read carefully and save these instructions, as you may need them at a later date..

CAUTION
WARNING :Risk of Fire.Min90℃ supply conductors.Consult a qualified electrician to ensure correct branch circuit conductor.
Turn off the main power at the circuit breaker before installing the fixture, in order to prevent possible shock.

GENERAL

All electrical connections must be in accordance with local and National Electrical Code (N.E.C.) standards. If you are unfamiliar with proper electrical wiring connections obtain the services of a qualified electrician.
Remove the fixture and the mounting package from the box and make sure that no parts are missing by referencing the illustrations on the installation instructions.

ASSEMBLY AND INSTALLATION

Turn off the power at fuse or circuit breaker.

1. Gently take all parts out of the package and lay them on a smooth surface. Remove screws from top of back plate and remove mounting plate.

2. Attach the mounting plate to the Junction box using two junction box screw .

3. Connect the fixture wires to supply wires as shown in Fig.1,making sure that all wire connectors are secured.
   If your outlet box has a green or bare copper ground wire,connect the fixture ground wire to it. Otherwise, connect the fixture’s ground wire directly to the back plate using the green screw provided. After wires are connected,tuck them carefully inside the junction box.

4. Place the fixture plate over the mounting plate and secure with two cap nuts and lock washers.

5. Install the bulbs onto the socket.

6. Install the finial on the upper cover.

7. Install the finial and waterproof washer on the fixture bottom.

8. Secure the upper cover to fixture using two cap nuts and lock washers.

9. To prevent moisture from entering the outlet box and causing a short, use clear caulking (i.e. indoor/outdoor silicone sealant) to outline the outside of the fixture back plate where it meets the wall. Leave a space at the bottom to allow moisture to escape.

Turn on the power at fuse or circuit breaker

IF IN DOUBT ABOUT ELECTRICAL INSTALLATION, CONSULT A LICENSED ELECTRICIAN.

Customer Service 1-800-558-8700

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>