Salamander Pumps CWCOND01 Water Conditioners Installation Guide

Salamander Pumps CWCOND01 Water Conditioners

Product Information

Specifications

• Product Range: CWCOND01, CWCOND02, CWCOND03
• Size: 80x20mm
• Connection Sizes:
  • CWCOND01: 1/2 BSP-P, 300x28mm
  • CWCOND02: 1/2 BSP-T, 330x35mm
  • CWCOND03: 3/4 BSP-T, 330x35mm
• Flow Range:
  • 0-15 L/min
  • 3-25 L/min
  • 24-54 L/min
• Supplied Fittings:
  • CWCOND01: N/A
  • CWCOND02: 15mm x 1/2 F
  • CWCOND03: 22mm x 3/4 F

Product Usage Instructions

Installation for Point-of-Entry/Whole House (CWCOND02 and CWCOND03)

1. Ensure you have selected the correct size of water conditioner based on property flow rates.
2. Turn off the water supply at the stop tap and drain the pipe to be cut.
3. Locate the installation point in the pipework, measure, and remove the relevant section of the pipework.
4. Install the Salamander Pumps’ Water Conditioner with the correct flow direction and tight fittings.
5. Turn on the water supply slowly and check for leaks as pressure is restored.
6. Installation is complete.

Installation for Point-of-Use/Single Outlet (CWCOND01)

1. Ensure you have selected the correct size of water conditioner based on property flow rates.
2. Disconnect the shower head/hose from the mixer valve.
3. Connect the water conditioner to the mixer valve.
4. Connect the shower head/hose to the water conditioner.
5. Turn on the water supply slowly and check for leaks as pressure is restored.
6. Installation is complete.

OUR RANGE

Introduction

The Salamander Pumps’ range of water conditioners are designed to prevent limescale build up in a domestic property. These water conditioners ensure shower heads and other appliances (including shower pumps) are protected from scale build up and are easy to clean. Suitable for domestic installation at either point-of-use to treat the water at a single appliance or point-of-entry for a whole house solution.

Further Guidance

• Single appliance or whole house solution
• Can be installed horizontally or vertically.
• No wiring is required.
• Maximum pressure 10 bar.
• No maintenance needed.
• Ensures compliance with part L, UK Building Regulations.
• Supplied with a 10 year warranty

For further information and support call our Customer Services Team on 0191 5162002 or email tech@salamanderpumps.co.uk

Installation instructions for point-of-entry/whole house CWCOND02 and

CWCOND03

1. Ensure you have selected the correct size of water conditioner, in-line with property flow rates. See specification table overleaf.

2. Ensure the water supply is switched off at the stop tap and ensure the pipe that is to be cut is drained.

3. Locate the correct point in the pipework to install the water conditioner. Measure and remove the relevant area of pipework.

4. Fit the Salamander Pumps’ Water Conditionerensuring the flow direction is correct (refer to directional arrow on the product) and fittings are tight at both ends
   The following fittings are supplied:
   CWCOND02 – 15mm x 1/2” F
   CWCOND03 – 22mm x 3/4” F

5. Turn on supply slowly, checking for leaks as pressure is restored.

6. Installation is complete.

Installation instructions for point-of-use/single outlet

CWCOND01
Ensure you have selected the correct size of water conditioner, in line with property flow rates. See specification table overleaf.

1. Disconnect shower head/hose from mixer valve.
2. Connect water conditioner to the mixer valve.
3. Connect shower head/hose to water conditioner.
4. Turn on supply slowly, checking for leaks as pressure is restored.
5. Installation is complete.

FAQ

Q: How do I know which size of water conditioner to choose?
A: Select the size based on your property’s flow rates as indicated in the specification table.

Q: Can the water conditioner be installed at any angle?
A: It is recommended to install the water conditioner with the correct flow direction as indicated by the directional arrow on the product.

Q: What should I do if I encounter leaks during installation?
A: Double-check the fittings for tightness and ensure they are correctly installed. If leaks persist, contact our Customer Services Team for assistance.

Read User Manual Online (PDF format)

Download This Manual (PDF format)

Download this manual  >>