AONGAN Q110 Cool Stunt Twist Truck User Manual

AONGAN Q110 Cool Stunt Twist Truck

**About the Stunt Twist Truck

**

With two modes of driving and driving modes, the twist truck adopts 2.4G remote radio control technology to enable flexible, bidirectional driving, 360-degree rotation, and twisting action. It is designed to travel on various terrains, including grassland, sandy land, mountain roads, snow, etc. It is also capable of performing stunts, such as rotation and flip.

List of Original Accessories

• Stunt Twist Truck x1
• Remote Controller x1
• Lithium Battery x1
• USB Charging Cable x1
• Screwdriver x1
• User Manual x1

Notes:  Before using, check the remote control’s battery and quality; the remote control has two AA batteries.

About the Stunt Twist Truck
With two modes of racing and climbing modes, the twist truck adopts 2.4G remote control technology to realise forward, backward, left/right sideway, left/right rotation, twist and transformation, light & music, intelligent programming, auto demo, etc. via remote controller or watch controller.

Operation Tips

Operation Environment

• Do not use it on public roads or streets to avoid potential threat to the traffic.
• Do not use it in crowded places or around people or animals to avoid potential personal injuries or property losses.
• Do not touch or stop the wheels in rotation.
• Do not use it in the rain or have it run over puddles to avoid failures.
• Do not operate in the rain or make the remote control truck run over puddles to avoid failure.
• Do not touch the motor during or right after the operation as it might produce
• Take the battery from the remote control vehicles and launcher if not in use

List of Original Accessories

Note: post-hate income ese pond pour purchacres ones is the seller for replacement.

About the Remote Controller

Watch Controller (the battery for the remote control version requires additional purchase)

1. Indicator: The red indicator is for the power and will turn up when power is on; the green indicator is for the process of pairing and will turn up at startup and flash when pairing; the blue indicator is for low voltage and will flash when the battery is low.
2. Power Switch: Short press to power on, long press for 3 seconds to power off.
3. Function Button (Switch between rotation and lateral movement modes): Short press to switch between, long press for auto demo (rotation mode has been activated by default at startup)
   Note: The watch will power off automatically in 3 minutes in standby mode (i.e. operations)

Remote Controller

1. Antenna
2. Indicator
3. Switch
4. Forward
5. Backward
6. Left Rotation/ Sideway
7. Right Rotation/Sideway
8. Mode Switch (Left and right rotation by default, press to switch to lateral movements mode)
9. Twist and Transfer
10. Sound Switch
11. Short Press for Programming/ Long Press for Demo
12. Battery Compartment

Button Batteries for Watch Controller

Battery Installation for the Remote Controller

• Open the battery cover of the remote controller
  Use a Phillips screwdriver to open the battery cover of the remote controller.

• Install the batteries of the remote controller
  AA alkaline batteryx2 1.5V “AA’ Open the battery cover and insert 2 alkaline batteries with the two poles aligned correctly. (batteries require additional purchase)

Note:

1. Ensure the two poles have been aligned correctly when loading the batteries.
2. Please do not mix old and new batteries.
3. Please do not mix different types of batteries.

Pair the Remote Controller with the RC Truck

1. Pair the Watch Controller with the RC Truck(The remote control version requires additional purchase)
   Press the power switch on the controller, and then power on the RC truck when the controller’s indicators flash slowly. The controller’s indicators turn from slow flash to solid, indicating the pairing has been successful.

2. Pair the Remote Controller with the RC Truck

Power on the remote controller first and when the indicator flashes slowly, power on the remote control truck. When you hear the sound of “click” and that indicates standby mode, the red indicator of the remote controller will turn off, indicating the pairing has been successful.

Charge fro RC Truck Battery

• Unscrew the buckle as shown in the figure, and then open the battery cover to take the batteries out of the RC truck’s battery compartment.
• Connect the USB charger connector with the battery connector and ensure the two poles are aligned correctly. Plug the UsB cable of the UsB charger into the computer interface, and you’ll see the LED light turns on when being charged and off when charging completes. It takes 90-120 minutes to charge up to full and gives 20-25 minutes of playing time.
• After charging, insert the batteries into the battery compartment and connect them with the connector on the circuit board with the two poles aligned correctly

Note:

• This product is suitable for children above 8 years old. Minors must have the supervision of an adult when using this product.
• Please be careful when using all electronic products to protect yourself from electric shock.
• Please do not disassemble or modify this product without authorization, as any modification may result in malfunction.

Operating Steps

1. Power on the remote control truck, keep it stable, and slowly toggle the throttle joystick on the remote controller (see Figure O) to see if the remote control truck moves forward or backward.
2. Place the remote control truck on the ground and slowly toggle the rudder jovstick on the remote controller (see Figure (2)) to see if the wheels are rotating.

Note:
Please comply with the following steps to avoid losing the remote control tank or losing control of it:

1. 1. Power on the remote controller.
2. 2. Power on the remote control truck.
   Follow the reverse steps to turn it off.

Battery Safety Precautions

1. There is a potential risk of personal injuries and property loss when using batteries. Please be cautious and bear the responsibility for your safety.
2. If the battery leaks, please avoid direct contact with your skin or eyes. Please immediately wash with soap and running water if it gets on your skin, and wash with plenty of cold water and seek doctors if it gets on your eyes.
3. If the charger smells suspicious or emits smoke, unplug it immediately.

Charging

• Please use the original specific USB charger and do not use ones that are broken or from other brands.
• Do not charge your battery when it is swollen, leaking or worn out.
• Do not overcharge the battery. Please disconnect the charger when the battery has been fully charged.
• Do not charge the battery around flammable materials (such as carpets, wood floors, solid wood furniture, etc.) or on surfaces of conductive objects. Keep the battery in line of sight during charging.
• Do not rush to charge the battery when it does not cool down yet after usage.
• Ensure the charging temperature is between 0°C and 40°C.

Adapter

• Please use the appropriate adapter for charging. Input: 100-240V~50/60Hz 0.2A, output: 5.0V-500mA 0.5-1.5A

Recycling

• This product consists of electric components and batteries. Please follow the local regulations to specifically dispose of the electric wastes and appliances.

Play with Remote Controller

1. Watch Controller (the remote control version requires additional purchase)

2. Forward & Backward
   It will move forward when your fist horizontally tilts forward and move backward when your fist horizontally tilts backward.

3. Left and Right Rotation(Default Rotation Mode at Startup)
   It will implement left rotation when your fist horizontally tilts to the left and right rotation when your fist horizontally tilts to the right.

4. Left and Right Sideway (Short Press the Function Button to Switch to Lateral Movement Mode)
   It will move laterally to the left when your fist horizontally tilts to the left and move laterally to right when your fist horizontally tilts to the right.

5. Turn Left and Right (Default at Startup)
   It will turn left when your fist horizontally tilts forward and to the left, and turn right when your fist horizontally tilts backward to the right.

6. 45° Left and Right Forward
   It will move forward at 45 to the left when your fist horizontally tills forward and to the left, and move forward at 45° to the right when you fist horizontally tills forward and to the right.

7. Twist and Transform
   When you level up your arms, the main body ascends vertically to transform to Climbing Mode. When you level down your arms, the main body descends vertically to transform to Racing Mode.

8. Auto Demo

  * Press the function button to enable auto demo.
  * Remote Controller
    * Forward & Backward Press the forward/backward button on the remote controller to let it move forward/backward.
  *  **2 Left/Right Rotation**  

Press the left/right rotation button on the remote controller to let it rotate to the left/right.

  *  **Left/Right Sideway**  

Press the sideway/rotation button on the remote controller to switch collateral Mode (default mode at startup), and press the left /right sideway button to let it move to the left/right.

  *  **Twist & Transform**
  *  **Sound Switch**  

Press the sound switch button to turn it off and press again to turn it on.

  *  **Programming and Auto Demo**  

Press the programming button to add commands with up to 15 combos besides music, water boom/blaster launch, spray, and audio demo. Once done, press again to demonstrate the command combo one by one.

Let’s practice. Use angle towers (applicable separately, such as empty bottles) to let the remote control vehicle loop around in a wide and spacious space. It is safe to speed up when driving in a straight line and slow down in corners.

Maintenance

Battery Storage

1. Devil charge tel him pater ten, entering if up the primes of.
2. Place the lithium battery in a dry indoor space with an appropriate temperature between 10 ° C-30° C(see image 2).
3. Conduct a charge cycle every other month to keep it active and perform

Troubleshooting

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>