SUBWAY Indoor LED Signs Installation Guide
- June 4, 2024
- SUBWAY
Table of Contents
Indoor LED Signs
Installation Guide
Indoor LED Signs
Available Sign Models
All signs are sold separately.
Subway Sign
Model #950910
18V 5A power supply
Remote control model: Remote B-2/Remote B-3
Choice Mark Sign
Model #950900
18V 3A power supply
Remote control model: Remote B-2/Remote B-3
Add-On Message
Signs Do NOT include power supply signs powered by the Open Sign.
Hang up to 3 from each Open Sign
Installation
-
Install ceiling hooks (not provided) 14.25” apart.
-
Hang the sign with the provided cable set (Fig. 1).
A. Press and hold the Release Button on the gripper.
B. Feed the cable into the Release Button and out the side, let go of the button ensuring the cable is gripped.
C. Place the provided S-hooks thru the loops at the end of the cables and attach them to the top of the sign.
D. Press the Release Button again on each gripper to slide the cables until the sign is level and at the desired height.
E. Cut excess cable with scissors. -
Insert the power cord into the back of the sign and plug the adapter into a grounded outlet.
-
On the back of the sign, set the power switch to the REMOTE position to control the sign via remote control. (Remote includes 27A battery; Range: 50 feet)
-
On the side of the remote control, switch the power to the ON position and press the ON or OFF button to control the sign(s).
Approved Hanging Options
Always use the power supply included with TOP SIGN
CAUTION – To
reduce the risk of fire, electric shock, or injury:
- Hang signs together per the Approved Hanging Options ONLY. Other hanging configurations will affect proper power current and damage may occur. Improper installation is not covered under warranty. Follow the diagrams on the backside.
- This product is for indoor use only. Do not use it in damp or wet locations.
- Not for use with light-dimmer circuits.
- To reduce the likelihood of injury or damage, mount only to a mechanically sound surface.
- Do not use extension cords or outlets with inadequate current carrying capacity.
- It is recommended to use a surge protector. Power surges ARE NOT covered under warranty for this product.
- Only use the power adapter supplied with a sign.
- Do not handle the adapter or sign with wet hands.
- Disconnect power before handling or cleaning.
- Do not use liquid cleaners or aerosol cleaners. Use a dry cloth for cleaning.
- This product is fully assembled and ready to use. Do not attempt to disassemble or service.
- Do not alter the plug or power supply cord in any way.
LED SIGNS
Limited 3-Year Warranty
C-M Glo, LLC warrants that this product will be free from defect due to
material and workmanship under normal use for a period of three (3) years and
warrants the power supply for two (2) years from the date of purchase. Please
retain the receipt for proof of purchase. Proof of purchase is required for
any warranty claim. Warranty is void if the product is abused, disassembled,
or exposed to atmosphere or conditions other than stated within instructions.
If the product fails within the specified time, contact C-M Glo at the address
below for return details. Your sign will be repaired or replaced within six
weeks.
For Sales Outside of North America: These signs are warranted for a
period of 3 years after purchase by the end user, provided the sign is
installed within one year of the production date on the sticker on the back of
the sign. This one year allows for transit, storage at a distributor, etc.
Proof of purchase by the end-user within one year of the production date will
be required.
C-M Glo, LLC
1201 N. 4th Street, Watertown, WI 53098
920-261-1000 •
[email protected]
DISCLAIMER OF WARRANTY
All signage products manufactured by CM Global are warranted to be free from
defects in material and workmanship under normal use and service, providing
that no alterations have been made to the product and that the product shall
be used in accordance with printed instructions, operating temperatures, and
operated in circuits of voltage stamped on the nameplate. Except as otherwise
provided in this Warranty, our obligation under this warranty shall be limited
to replacing or repairing, at our option, any parts which shall be
demonstrated to be defective within THREE (3) YEARS after the date of purchase
by the user. Only CM Global-sold transformers/power supplies may be used with
CM Global signs. Any third-party transformer/power supply used and not
purchased through CM Global will void the product warranty. We shall, upon
prompt, written notice and compliance by the user with such instructions as
our Customer Service Department shall give with respect to the return of
defective products or parts, correct such defect by repair or replacement of
the defective part or parts. Correction in the manner provided above shall
constitute a fulfillment of all of our liabilities with respect to the quality
of the products. Our liability arising from or in any way connected with the
products sold, the delivery or any delay with respect thereto or otherwise
arising from or relating to this Warranty shall be limited exclusively, and at
our sole election, to either repair or replacement of products sold refund of
the purchase price. Replacement or repair of any component does not extend the
warranty period of the sign. This warranty does not cover misuse or abuse,
unauthorized repair, alteration, or disassembly by unauthorized personnel; or
operation by improper voltage or current (including power surges). In no event
shall CM Global be liable for any incidental, consequential, or special
damages of any kind or nature whatsoever, including, but not limited to, lost
profits arising from or in any way connected with this Warranty, or items sold
hereunder, whether alleged to arise from breach of contract, express or
implied warranty, or in tort, including, without limitation, negligence,
failure to warn or strict liability.
FCC Warning
This device complies with Part 15 of the FCC Rules. Operation is subject to
the following two conditions
- this device may not cause harmful interference, and
- this device must accept any interference received, including interference that may cause undesired operation. Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.
Note 1: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and the receiver.
- Connect the equipment to an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.
Note 2: 1. Changes or modifications to this unit not expressly approved
by the party responsible for compliance could void the user’s authority to
operate the equipment.
Radiation Exposure Statement The device has been evaluated to meet the general
RF exposure requirement.
The device can be used in portable exposure conditions without restriction.