nVent 60630-516_BET_A RDHX Pro RackChiller User Manual
- May 15, 2024
- nVent
Table of Contents
nVent 60630-516_BET_A RDHX Pro RackChiller
Product Information
Product Information
- Product Name: RackChiller RDHX Pro
- Manufacturer: nVent
- Model Number: 60630-516_BET Rev.A
Specifications
- Weight: 4 (3x)
- Dimensions (LxWxH): 1 (1x) – L=555.00
- Power Consumption: ~7.65
- Material: A, B, C
- Torque: D (5Nm)
FAQ
- Q: How often should I clean the RackChiller RDHX Pro?
- A: It is recommended to clean the unit at least once every three months to ensure efficient operation.
- Q: Can I adjust the fan speed on the RackChiller RDHX Pro?
- A: Yes, you can adjust the fan speed to customize the cooling performance based on your needs. Refer to the user manual for instructions on adjusting fan settings.
What In The Box
NOTE
- Tolerance of ±15% on all tightening torques, unless otherwise specified.
- Tightening torques are given with a tolerance of ±15% unless otherwise stated.
- The tightening torques are given with a tolerance of ±15% unless otherwise indicated.
- Electrical connections only by trained and instructed specialist personnel.
- Only qualified and specialized personnel are authorized to make the connections.
- Only qualified and specialized personnel are authorized to carry out the branching.
- For parts or components that weigh more than 25 kg, for assembly and Dismantling requires at least two people.
- At least two persons are required to install or remove equipment or components which weight more than 25 kg.
- The assembly and disassembly of equipment or components of a mass above 25 kg requires at least two people.
- For hinges on the right side, the assembly must be carried out symmetrically
- For hinges on the right side, assembly must be symmetrical
- For the hinge on the right, the assembly is to be carried out symmetrically
- The instructions are shown for the upper water connection.
- For the water connection from below, the assembly must be carried out symmetrically.
- The instructions are illustrated for the top water connection.
- If the water connection is from the bottom, the installation must be symmetrical.
- The instructions are shown for the top water connection, for the connection water from the bottom, the assembly must be carried out symmetrically.
Installation Instructions
NOTE
- For mounting the frame on the cabinet, refer to the user manual of the interface kit
- The default door mounting is for the water connection at the top, for the bottom water connection, you have to move the elements A,B,C and D
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>