GLOBO LIGHTING 31986 Outdoor Light Installation Guide
- May 15, 2024
- GLOBO LIGHTING
Table of Contents
GLOBO LIGHTING 31986 Outdoor Light
The image displays an instruction manual for a lighting product by GLOBO LIGHTING. The manual includes a diagram for the assembly of the product, specifications for the light bulb to be used, and electrical information. Additionally, there is corporate information for GLOBO Handels GmbH.
Assembly Diagram
The diagram shows an exploded view of the light fixture, illustrating the individual components and their arrangement for assembly. The main elements depicted are:
- A cylindrical shade with a vertical orientation.
- An electrical cable running through a tube with a bulb socket at its end.
- The bulb socket is designed to hold an E27 LED bulb.
- Mounting hardware including screws and wall anchors.
- Wiring connections within a junction box.
Arrows indicate the direction in which parts should be assembled or moved. The shade is shown being placed over the bulb and socket assembly, which is then connected to the mounting hardware attached to the wall.
Specifications
| Product Code | 31986 |
|---|---|
| Protection Class | IP44 |
| Bulb Type | Use only LED |
| Maximum Wattage | 15W E27 LED |
| Voltage/Frequency | 230V~ 50Hz |
Electrical Connection
The electrical connection instructions are visualized in two diagrams, labeled A (OFF) and C (ON), showing the switchboard with the main power switch in the off and on positions, respectively. The diagrams indicate that the power should be turned off during the installation process and can be turned on after installation is complete.
FAQs
-
What type of light bulb should be used with this fixture?
The fixture requires a maximum 15W E27 LED bulb. -
Is the fixture suitable for outdoor use?
The fixture has an IP44 protection class, which indicates it is protected against solid objects larger than 1mm and water splashing from all directions, making it suitable for certain outdoor conditions. -
How should the light fixture be mounted?
The fixture should be mounted using the provided screws and wall anchors, with the electrical cable running through the tube and connecting to the bulb socket, as depicted in the assembly diagram. -
Can I use a non-LED bulb with this fixture?
No, the fixture is designed to be used with LED bulbs only, as specified in the manual. -
What should I do before installing the light fixture?
Ensure the main power is turned off at the switchboard before installation to prevent any electrical hazards, as shown in the diagram labeled A (OFF).
Corporate Information
GLOBO Handels GmbH
Gewerbestrasse 3
A-9184 Sankt Peter
AUSTRIA
www.globo-lighting.com
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>