rmoati NDW-15WT 1500W Electric Heater with Flame Effect Instruction Manual

rmoati NDW-15WT 1500W Electric Heater with Flame Effect

PRODUCT INFORMATION

Specifications

• Model Number: NDW-15WT
• Rated Power: 1500W
• Rated Voltage: 120V 60Hz AC
• Power Supply Method: Plug-in
• Dimensions: 4.5D x 33.2W x 15H inches

Product Overview
The electric space heater model NDW-15WT is designed to provide efficient heating for your space. It comes with a power rating of 1500W and operates on a standard 120V AC power supply. The heater can be conveniently plugged in for easy use.

Installation Instructions

Heater Accessories

• Mainframe
• Remote Control
• Manual
• Wall Brackets
• Buffer Pad
• Freestanding Base
• Screws (8)

Wall Mounting

1. Insert the shorter end of the wall bracket into the slot of the electric heater.
2. Secure the longer end of the wall bracket with a tri-wing screw.
3. Install the buffer pads on the electric heater and secure them with self-tapping screws.
4. Measure the desired hanging distance.
5. Use a drill to punch a hole in the wall.
6. Insert the expansion screws into the wall.
7. Hang the electric heater securely.

Floor Standing

1. Align the bottom straight bracket with the groove on the electric heater and insert it.
2. Secure the base by attaching it with a tri-wing screw.

Smart Control

Panel Control
The panel control features buttons for adjusting temperature and power settings. Press the power button to turn on the heater. Use the up and down buttons to switch between heating levels (1500W/750W/Standby Mode). Additionally, you can change the temperature unit between Fahrenheit and Celsius by holding both buttons for 10 seconds.

FAQ

• Can I use the electric heater in a bathroom?
  It is not recommended to use this electric heater in bathrooms or other high-humidity environments to avoid potential safety hazards.

• How do I clean the electric heater?
  To clean the heater, make sure it is unplugged and cooled down. Use a soft, dry cloth to wipe the exterior surfaces. Do not use water or liquid cleaners on the heater.

Before First Use

Read and follow all the instructions in this manual even if you feel you are familiar with the product, and find a place to keep it handy for future reference.

Important Safeguards

• Basic safety precautions, including the following, should always be observed when using any motorized product:
• Please read all instructions carefully before using the product.

Warning
To reduce the risk of fire, electric shock, or injury to persons or property:

1. Important Safety Instructions
   Please read all instructions before using this heater. Save these instructions for future reference.

2. Voltage
   Only operate the heater with the voltage listed on the nameplate.

3. Ventilation
   Never block or restrict the air inlet or outlet in any way. Do not put foreign objects or metal objects into the air inlet or outlet. Do not lean on anything near the heater. Keep a distance of at least 3 feet. Avoid causing fire or electric shock.

4. Heat Sources
   Keep at least 3 feet away from radiant heat, like furnaces or fireplaces.

5. Flammables
   Do not operate the heater where gasoline, paints or other flammables are used or stored.

6. Burn Prevention
   The heater gets hot during use. Avoid direct contact with heating elements. Allow to fully cool before moving or storing.

7. Do Not Dry Clothes
   This product is not intended to dry clothing.

8. Foreign Objects
   Keep foreign objects out of air intakes and outlets. This may cause shock, fire or damage.

9. Water Hazards
   Do not operate if dropped in water. Unplug immediately. Do not clean with water or any liquid.

10. Cords and Plugs
    Do not use if cord or plug is damaged. Return damaged heaters to an authorized service center.

11. Dry Hands
    Always unplug before handling or cleaning the heater.

12. Cleaning and Maintenance
    Vacuum vents and grills regularly to prevent dust buildup. Clean exterior with dry cloth only.
    Always unplug before assembly, cleaning or servicing. Contact customer support with any other issues. Read and follow all instructions to ensure safe use.

FCC Statement

This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the Following measures:

• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help

The device must not be co-located or operating in conjunction with any other antenna or transmitter.
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions : (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.

FCC RF Radiation Exposure Statement Caution :
To maintain compliance with the FCC’s RF exposure guidelines, place the product at least 20cm or 7.9inch from nearby persons.

Product Overview

Specifications

Model Number

| ****

NDW-15WT

---|---

Rated Power

| ****

1500W

Rated Voltage

| ****

120V 60Hz

Power Supply Method

| ****

AC Power Plug-in

Dimensions(Inch)

| ****

4.5D33.2W15H

Function Module Circuit Diagram

Installation Instructions

Heater Accessories

Wall Mounting

1. Insert the shorter end of the wall bracket insert into the slot of the electric heater.
2. Secure the longer end of the wall bracket with a tri-wing screw.
3. Install the 2 buffer pad on the electric heater and secure it with a self-tapping screw.
4. Measure the desired hanging distance.
5. Use a drill to punch a hole in the wall.
6. Insert the expansion screws into the wall.
7. Hang the electric heater securely.

Floor Standing

1. Align the bottom straight bracket with the groove on the electric heater and insert it.
2. Secure the base by attaching it with a tri-wing screw.

Smart Control

Panel Control

Remote Control

Mobile Control

1. **App Download

** Scan the QR code below to download the app on your smart device. Alternatively, search for the app “Smart Life”on IOS App Store or Android Play Store to download.

2. Connect Heater to WiFi
3. Enter the app interface.
4. Click the + icon in the upper right-hand corner or alternatively press Add Device.
5. Scroll to Small Home Appliances on the left and select “Heater (WiFi) or Fireplace(WiFi)”.
6. Enter the corresponding password to the chosen Wi-Fi network account.
7. Hold the setting button on the heater touch screen for more than 3 seconds, until the Wi-Fi icon is blinking on the heater.
8. Confirm that the icon is quickly blinking on your device. If the indicator is not blinking, reset the Wi-Fi. (Hold the setting button on the heater touch screen for more than 3 seconds)
9. Set the device information and press Done to enter the control interface where you will now be able to control the heater.
10. Click”Add device”
11. Selection of “Small Home Appliances” and “Electric Fireplace(Wi-Fi)” or Heater (Wi-Fi)

  3. After recognizing the WiFi your phone is connected to, enter the password
  4. Press and hold the key on the panel for three seconds. Let the WiFi indicator on the panel blink. Then click on “Confirm the indicator is blinking”

  5. “Blink Quickly”
  6. Now! You can control it from your mobile phone!

3. Change from Celsius to Fahrenheit
4. Hold both and for 10 seconds to switch the display between degrees Celsius and Fahrenheit.（Panel control）
5. After the APP is opened ， click “Me” at the bottom right of the screen. Then,click the “Settings icon”in the upper right. Choose temp unit convert to change between Celsius and Fahrenheit.（Mobile control）
6. Control Interface-Timer to turn on/off the heater
7. Click the setting button at the bottom right of the app interface. The timer tab will allow users to add schedules.
8. Alternatively, the Dp_countdown_set button at the bottom of the app interface will allow countdown by hours to turn off the heater.
9. Control Interface- Dp_level explained
10. High: 1500W high power.
11. Low: 750W low power.
12. OFF: no more heating.
13. Click on “Me” at the bottom right
14. Click on the Settings icon in the upper right

  3. The language can be adjusted here, as well as the temperature unit

Thermostat

Intelligent Thermostat

1. The panel displays the ambient temperature when the power is turned on.
2. Then you can set the temperature you need to heat via the panel, remote control or mobile app.
3. When your ambient temperature is equal to the set temperature, it will automatically stop heating.
4. Heating will continue to turn on after the ambient temperature has fallen below the set temperature by approximately 4 ℉.
5. If you want the electric heater to stay heated. You need to set a temperature that is higher than the ambient temperature ratio.

Example

1. The ambient temperature shown on the panel is 70°F and the set temperature is 80°F. When the ambient temperature reaches 80°F, it will automatically stop heating.
2. After a period of time, when the panel temperature drops to approximately 76°F, it will begin heating operation again.
3. If you want to continue heating continuously. You can set the temperature higher than 80°F, for example 99°F.

Safe Usage Guidelines

Safety Feature

1. The unit is equipped with a high limit switch. If the heater reaches an overheating condition, it will automatically shut off for safety. Once the heater has cooled down, it will automatically turn back on.
2. In the event of accidental tipping, the device will automatically power off for safety.

Important Safety Reminder

1. Properly secure the heater to the wall or place the heater in the correct position.
2. To prevent water ingress, please avoid handling the electric heater immediately after using the bathroom.
3. Ensure that the heater is installed in a position that is not directly under a socket outlet.
4. Please do not use it in the vicinity of bath, shower, or swimming pool.
5. If the power cord is damaged, please consult a qualified electrician or maintenance technician for assistance.
6. DO NOT cover the heater when it is working.
7. DO NOT touch the air outlet when it is working.
8. DO NOT use in the bathroom.

Cleaning and Storage

Cleaning Instructions

1. Before cleaning, always unplug the heater from the mains supply.
2. Make sure the heater has completely cooled down before starting the cleaning process.
3. Use a slightly damp cloth (not wet) to wipe the exterior of the heater and remove dust and dirt.
4. To remove dust and fluff from the grilles, use a vacuum cleaner.
5. Ensure the heater is completely dry before plugging it back into the mains supply.

Storage Tips

1. Ensure that the heater has completely cooled down before storing it away.
2. Clean the exterior of the heater before storing it away.
3. Before storing, inspect the power cord and other components for any damage. Repair or replace if necessary.
4. If possible, use the original packaging or appropriate packing materials to protect the heater from dust, scratches, or other damage.
5. Regularly check the heater during storage to ensure it remains clean and undamaged.
6. Before using it again in the next winter season, inspect the heater for its operational condition and safety performance to ensure it is suitable for use.

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>