Winjet RNGT-0667 LED Tail Lights User Manual
- June 17, 2024
- Winjet
Table of Contents
Winjet RNGT-0667 LED Tail Lights
Product Information
Specifications
- Model: RNGT-0667 WJ20-0377
- Type: Tail Lights
- Components: 2 Tail Lights, 4 Bolts, Back-Up Bulb & Socket
TAIL LIGHTS
Model.: RNGT-0667
WJ20-0377
Product Usage Instructions
Installation Instructions
- Locate the existing tail lights on your vehicle.
- Remove the bolts securing the current tail lights and detach them from the vehicle.
- Position the new tail lights in place and secure them using the provided bolts.
- Connect the back-up bulb & socket from the original lights to the new tail lights.
- Disconnect all plugs from the original lights.
- Identify the functions of each wire: Turn Signal (1), Back-Up (2), Brake/Parking (3).
- Connect the wires according to their functions to ensure proper functionality.
- Repeat steps 2 to 7 for the tail lights on the other side of the vehicle.
Frequently Asked Questions (FAQ)
Q: Do I need any special tools for installing these tail lights?
A: No, basic tools like a screwdriver may be required to install the tail
lights.
Q: Can these tail lights be used on all vehicle models?
A: These tail lights are designed to be compatible with most standard
vehicle models. However, it is recommended to check the compatibility with
your specific vehicle model before installation.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>