WHDPETS B0B9SM79G4 Automatic Pet Feeder User Guide

WHDPETS B0B9SM79G4 Automatic Pet Feeder

Accessory List

Before installation, pls confirm the accessories.

Product Introduction

Product Introduction

Assemble Guidelines

• Power on the device (Note: The device supports dual power supply) It can be powered by a power adapter (insert the adapter plug into the power adapter jack on the base) , or three D cell batteries, or both.

Installation

1. Place the main unit on a horizontal surface and install the plastic food bowl;

2. Place the stainless steel inner bowl in the plastic bowl;

3. After confirming that the bucket is installed in place, lock the bucket lock;
   Scenario 1: The bucket already contains pet food. Please place the bucket on the main unit according to the correct orientation, press the lock button to unlock the device, then long press the manual feeding button for 3 seconds, the screen will show “—-“, the main unit will start the bucket installation auxiliary function automatically. In this process of function operation, please keep the bucket in the right orientation with your hand and wait for the accurate installation of the bucket – Scenario 2: If there is no food in the barrel, but still cannot be installed in place. You can repeat the operation in Scenario 1, or please ensure the bucket in the correct installation position, and at the same time, turn the silicone rotor blade to let the bucket installed in place

4. If the bucket is empty, please fill the bucket with pet food;

5. Put the desiccant into the desiccant box, and cover the top cover after adding the food to the bucket to complete the installation

Operating Panel Introduction

Setting Introduction

• Before entering the setting, please long press the lock button “ ” for three seconds to unlock the other buttons.
• Press the setting button “ ” to enter setting state, and the screen will show as following:
  (The setting program will jump in turn, please follow the instructions to set in turn.)

Setting 1: Key tone ON/OFF
Under the unlocked state, press the setting button to enter the setting state. When the “ ” shows and flashes, press the setting button “b” to confirm and proceed to the next step. You can press the increase button “ + ” or the decrease button “—” to choose ON or OFF, then long press the setting button “ ” for 3 seconds to save the settings and exit.

Setting 2: Real-time Setting
Pls, check the current time of the pet feeder before using it. Unlock the device, then press the setting button “ ‘” to confirm and enter the setting state. Press the increase button “+” and the decrease button “-” to select the clock icon “ ” to blink, then press the setting button “ ” to enter the setting of “hour, minute”. When the number is flashing, pis press the increase button “+” or decrease button “_” to adjust the time you want. then long press the setting button “So?” 3 seconds to save settings then exit.

• Pis note, this device is 12 hours system, AM means morning, PM means afternoon, midnight is 12:00 AM, 12 o’clock

Setting 3: Feeding Schedule Setting

1. Meal number setting: Number “1, 2, 3, 4. 5. 6″ means you can set up to 6 meals a day. When the number ” 1″ flashing means entering the first meal setting. If you want to set other meal numbers, pls press “+” or “-” to adjust the number, then press the setting button “ ” to confirm and enter the “Feeding time setting”.
2. Feeding time setting: The first meal’s feeding time setting, you will set the hour and minute in turn. When the time digit flashes, press the “+” button or “-* button to adjust the digit. AM and PM are automatically switched during the setting. Press the setting button “ ” to confirm and proceed to the “Feeding portion setting”.
3. Feeding portion setting: Entering the feeding portion setting per meal, “p- 01” means 1 portion foods will be provided, each portion will be 7-10g and the portion number setting will be from 00 to 50. Press “*” or “-” to adjust portions and then press the setting button “ ‘” to confirm and proceed to “Recording playback setting”. (The number of grams per portion is for reference only due to the difference in size of different pet foods.)
4. Recording playback setting: Entering the recording playback setting, “A- 01” means playing the recording once when feeding, and the times of play can be set from 0 to 5. Press “+” or “—” button to select playing times. Then short press the setting button “ ” to enter the next meal number setting; long press the setting button “ ” 3 seconds will save setting and exit.

In any state, long press the setting button “ ” 3 seconds will exit the setting, and the screen will display a real-time clock and state icon.

Setting 4: Recording Setting

1. Voice recording/modification: Under unlock state, long press recording button “&” 3 seconds, when you hear a “beep” sound and the recording icon light up at the same time, the recording starts. Release the button to emit the “beep” sound twice means the recording has been saved. The maximum recording duration is 6 seconds.
2. Play recording: Short press the recording button “&” once, and play the recording once.

• Restore factory setting: Press “and ” +” at the same time, 5 seconds later, the feeding schedule is cleared, real-time is reset to zero, the keystone is enabled by default and the recording will be cleared.
• Clear the schedule: Press” +” and ” -” at the same time, 5 seconds later, the schedule will be cleared (schedule time set to zero, feeding portion set to zero, and recording playback times set to zero).

Setting 5: Manual Feeding Setting
Pis press the lock button “ ” to unlock other buttons, short press the manual feeding button “ ” and proceed to the manual feeding state. Press the increase button “+” to add a portion, or press the decrease button “—” to reduce the portion. The maximum manual feeding portion is 5, and the minimum manual feeding portion is 1.

Cleaning Instruction

1. “ ” means washable fitting, and “ ” means unwashable.
2. Do not wash the main unit, only wipe it with a soft cloth.
3. Pls, clean the stainless steel inner bowl every day to keep your pet healthy.
4. When changing pet foods, the food bucket and plastic food bowl can be removed for cleaning.
5. Remove the plastic food bowl from the main unit ( Figure 1)
6. Unlock the bucket lock, and draw up the food bucket (Figure 2)
7. Please clean and drain the bucket and stainless steel inner bowl (wipe dry) before installing and using.

Letter to the Users

Thank you for choosing our pet feeder products. Our company is committed to creating a better life for you and your pet with science and technology. In order to enable you to correctly use and maintain the product, please read this instruction manual carefully before operation and keep it properly for reference. Once installed or used, the following safety instructions have been carefully read and accepted. Our company is not responsible for any accidents and losses caused by illegal operations and does not assume any legal liability. Our company reserves the right of interpretation and modification of this statement.

Safety Notice

• Failure to comply with the following terms may result in the unavailability of the product or other unexpected losses. To reduce the risk of injury, monitor appliances closely when they are used near children.
• Do not immerse the base in water to avoid damage to the control panel and other electronic components.
• Do not use it outdoors or in a damp environment such as a toilet. Check and maintain regularly to ensure that the grain is delivered correctly.
• Do not use wet food
• Do not place any foreign objects in the pet feeder
• This product is only suitable for pet food (diameter between 5-15mm), larger pet food may get stuck.
• Do not place the product in a high place. If the product falls, it may cause damage or pet safety problems.
• Do not use the feeder for other purposes.
• Please use accessories recommended or sold by the manufacturer and do not modify the pet feeder without authorization.
• In addition to maintenance personnel, other people are not allowed to repair this product, to avoid causing various accidental injuries.
• Remove the battery and unplug the power cord when not in use and before cleaning.
• Please use it in an indoor environment, do not place it in the sunlight, as it will affect the device’s work; Keep away from ignition.
• This device is in low voltage mode, but pets biting wires will still cause electricity leakage, please use the correct guidance.
• Keep it horizontal. Do not knock over the device. Otherwise, the device may not work properly.
• If the owner needs to go out, please check the battery in the battery box to ensure sufficient battery power (this product is only suitable for alkaline batteries).

Specification

• Capacity
  

  • 6L

• Auto Feeding Schedule
  

  • 0-6 meals/day (0-50 portions/meal)

• Power
  

  • 5V DC Power cord Backup battery: D cell battery * 3 pcs (Not Included)

• Dimension
  

  • 356348200mm

• Consumption
  

  • < 0.5W

• Color

  • White

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>