dcbl-pro X1 True Wireless Earbuds User Manual
- June 4, 2024
- dcbl-pro
Table of Contents
True Wireless Earbuds
User Manual
https://Awww.debl-pro.com
User Manual
- Product name: DCBL Pro X1
- Bluetooth version: 5.0
- Power supply: DC 5V
- Sensitivity: 1O8+3Db
- Battery capacity: 3.7V/40MaH
- Charging case capacity: 3.7V/SOOMaH
- Charging time: Around GOmin
- Call duration: 3h
- Music playtime: 4h
- Stand-by duration: Around 120h
- Frequency range: 20-20kHz
- Compatible Protocols: HSP/HFP/A2DP/AVRCP
Package contents:
Bluetooth earbuds 2x (left and right)
Charging case 1x / User manual 1x / Ear cap 8x
USB Cable 1x / Exquisite packing box 1x
Operation Instructions
Press| Play/Pause
Answer/End Call
Press and hold for 2s
Activate voice control
Press and hold for 6s
Earbuds showdown
Double sticks: Next
Three clicks: Volume +
Double clicks: Previous
L Three clicks: Volume –
How to Use
Product Schematic
- Charging case contact point
- USB charging port
- Ear buds charging contact point
- Multi-function touch area
- Ear buds indicator
- Charging case power % indicator
Charging Case
Charging: the figure shows the charging case battery capacity.
Full charge: indicator light off
Charging time: 1.5h
Earphone
Charging: Orange Light constant
Full charge: Orange Light off
Charging time: 1h
Note: Please use the 5V/IA charger when charging the product.
Special attention: Do not use a quick charging device over 5V/IA to avoid
damage to the charging case.
Description of charging case.
Equipped with a SOOMaH charging case, it can charge the earphone at least 4
times, meeting the need of listening to music outside for a long time.
During the charging process, the two indicator lights of the left and right
earphones will turn Orange, and the Orange light will go off after the
charging is completed.
In the charging mode, the figure on the charging case displays will show the
battery capacity. It is fully charged when the figure is ** or above, and
please disconnect charging devices from the charging case.
Instruction for both ears:
When taken out, the earphone will automatically turn on and match.
- Take the earphones out of the package and put them into the charging case for charging activation.
- Take out two earphones from the charging case at the same time, and the left and right ears will be paired automatically. After the pairing is successful, the LED indicator light of the left ear will be Green and Orange alternately. Enter Bluetooth pairing state. (no buttons to trigger)
- Turn on Bluetooth, find the device named X1 in Bluetooth, and then click on the connection. After connecting, there will appear on the phone.
(After the first normal connection, a manual shutdown is recommended. Save the data so that the earphone will be automatically connected to the phone when taken out the next time).
Power off
Touch the left and right headphones at the touch area for 6 sec, and it will
be turned off after the Orange light flashes for 3 times. When directly put
into the charging case for charging, the earphone will turn off as well. (When
disconnected for five minutes, the earphone will shut down automatically).
F.A.Q.
– The phone cannot search for Bluetooth devices
– Clear all Bluetooth pairing data stored on your phone then turn on Bluetooth again and search for devices. .
– There is sound on only one earphone.
– Determine whether there is electricity on both sides.
– Confirm whether both sides are powered on.
– Determine whether both sides are paired successfully.
– Put the earbuds into the charging case again and take them out for
reconnection.
– The earphone is stuck or disconnected while calling or listening to music
– The battery of the Bluetooth phone is low.
– The distance between the mobile phone and the Bluetooth earphone is more
than 10 meters.
– There is a large area of signal-shielding objects between mobile phones and
Bluetooth earphones, like walls.
– The left and right ear pairings are not synchronized. It is recommended that
the left and right ears be re-paired after shutdown.
– The area should be touched correctly, otherwise, the touch and tap will
fail.
– The sound quality of the Bluetooth headset is not ideal****
– In order to guarantee sound quality, it is important that the use of ear buds is carried out carefully. We, therefore, recommend that you only play music obtained through well-known platforms such as Spotify, Apple Music Store, Deezer, Youtube, etc. It is recommended to play music in an orderly manner, whereby it is advised to maintain a moderate level. Any damage to the ear buds as a result of the use of music that has not been legally obtained will not be honored.
Product Quality Guarantee Card
Customer name: …………………….Tel.#/Cell#:…………………..
Email Address:…………………………………
Contact Address:……………………………….
Problem description:………………………………
Warranty instructions:…………………………….
Thank you for purchasing our products. To ensure your legitimate rights and
interests, please read the following carefully:
This card is the warranty certificate of the product. If the need of
maintenance arises, please provide this card together with the product to our
company for after-sales service.
This card is only valid for the products under warranty, as shown below:
- The company’s products are obtained through legal and regular channels;
- Non-human damaged products. Those damaged under circumstances including but not limited to unauthorized disassembly, improper use, natural disasters and other circumstances are not covered by the warranty.
- Products under warranty.
- The warranty for this product is two years upon presentation of a purchase receipt obtained from a legitimate sales or distribution channel.
“The company reserves the right of final interpretation.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>