PHILIPS H4 Ultinon LED Lamp Instruction Manual
- June 17, 2024
- Philips
Table of Contents
- PHILIPS H4 Ultinon LED Lamp
- Product Specifications
- Product Usage Instructions
- Frequently Asked Questions
- What include and using Instruction
- Installation Instruction
- Test
- Adapter
- LED CANBus
- Print the certificate
- PHILIPS H4 Ultinon LED Lamp
- Product Specifications
- Product Usage Instructions
- Frequently Asked Questions
- What include and using Instruction
- Installation Instruction
- Test
- Adapter
- LED CANBus
- Print the certificate
- General guidelines-Safety
- General guidelines-Safety
- References
- Read User Manual Online (PDF format)
- Download This Manual (PDF format)
PHILIPS H4 Ultinon LED Lamp
Product Specifications
- Model: Headlamp Replacement Kit
- Compatible Lamp Types: H4, H7
- Cap Types: Rubber, Hard Plastic
Product Usage Instructions
Installation Process:
- Ensure the car installation manual is consulted for lamp replacement instructions.
- Check the specific installation instructions of the adapter for detailed information.
- Verify compatibility with your vehicle before proceeding.
Lamp Replacement Steps:
- Disconnect the cable and remove the rubber cap or hard plastic cap as applicable.
- Insert the new lamp and secure it in place by turning it into the final position.
- If using a rubber cap, reinstate it after lamp insertion.
- If using a hard plastic cap, turn it into the final position securely.
- Cut a 20mm circle with scissors if necessary for proper fitting.
Safety Precautions:
- Always wear safety gloves to prevent injuries during the mounting process.
- Keep the product out of reach of children.
- Avoid touching the lamps directly as they may become hot during operation.
Frequently Asked Questions
Q: Do I need to check the compatibility of the product with my vehicle?
A: Yes, please ensure that the product is compatible with your vehicle before proceeding with installation.
Q: Are there specific instructions for driving in countries with left-hand traffic?
A: If driving in a country with left-hand traffic, replace the LED lamp with a halogen lamp as necessary. Follow the specific instructions provided.
Q: Is it necessary to print a certification document?
A: Yes, it is recommended to print and keep the certification document for reference.
ALLGEMEINE BAUART-GENEHMIGUNG (ABG) / APPROVAL DOCUMENT
Do not touch
What include and using Instruction
Installation Instruction
H4 Option 1
H4 Option 1a
H4 Option 2
H4 Option 3
H7 Option 1
H7 Option 2
Test
Adapter
Detailed Information in the specific installation instructions of the adapter
LED CANBus
Print the certificate
How to get general type approval for use in your vehicle on public roads:25
- Scan the QR code on the top of the packaging to authenticate the product and download the certificate.26
- Print out the approval document 27
- Keep the approval certificate at all times with you in the vehicle. 28
- In countries where applicable, paste the sticker on the headlight unit in the engine compartment / under the handlebar. 29
You are responsible to comply with all applicable legal requirements. 30
Approved for road traffic for selected countries and vehicle models only.
Check your country/vehicle at: Philips.com/roadlegalLED. 31)
PHILIPS H4 Ultinon LED Lamp
Product Specifications
- Model: Headlamp Replacement Kit
- Compatible Lamp Types: H4, H7
- Cap Types: Rubber, Hard Plastic
Product Usage Instructions
Installation Process:
- Ensure the car installation manual is consulted for lamp replacement instructions.
- Check the specific installation instructions of the adapter for detailed information.
- Verify compatibility with your vehicle before proceeding.
Lamp Replacement Steps:
- Disconnect the cable and remove the rubber cap or hard plastic cap as applicable.
- Insert the new lamp and secure it in place by turning it into the final position.
- If using a rubber cap, reinstate it after lamp insertion.
- If using a hard plastic cap, turn it into the final position securely.
- Cut a 20mm circle with scissors if necessary for proper fitting.
Safety Precautions:
- Always wear safety gloves to prevent injuries during the mounting process.
- Keep the product out of reach of children.
- Avoid touching the lamps directly as they may become hot during operation.
Frequently Asked Questions
Q: Do I need to check the compatibility of the product with my vehicle?
A: Yes, please ensure that the product is compatible with your vehicle before proceeding with installation.
Q: Are there specific instructions for driving in countries with left-hand traffic?
A: If driving in a country with left-hand traffic, replace the LED lamp with a halogen lamp as necessary. Follow the specific instructions provided.
Q: Is it necessary to print a certification document?
A: Yes, it is recommended to print and keep the certification document for reference.
ALLGEMEINE BAUART-GENEHMIGUNG (ABG) / APPROVAL DOCUMENT
Do not touch
What include and using Instruction
Installation Instruction
H4 Option 1
H4 Option 1a
H4 Option 2
H4 Option 3
H7 Option 1
H7 Option 2
Test
Adapter
Detailed Information in the specific installation instructions of the adapter
LED CANBus
Print the certificate
How to get general type approval for use in your vehicle on public roads:25
- Scan the QR code on the top of the packaging to authenticate the product and download the certificate.26
- Print out the approval document 27
- Keep the approval certificate at all times with you in the vehicle. 28
- In countries where applicable, paste the sticker on the headlight unit in the engine compartment / under the handlebar. 29
You are responsible to comply with all applicable legal requirements. 30
Approved for road traffic for selected countries and vehicle models only.
Check your country/vehicle at: Philips.com/roadlegalLED. 31)
General guidelines
- This LED replacement light source is only approved for right-hand traffic. Before entering a country with left-hand traffic, the LED lamp must be replaced by a halogen lamp. 33
- Please check car installation manual and follow instructions for lamp replacement.
- The LED light source, cables and components must be mounted in a way that the headlamp won’t be damaged and that its function is maintained. All parts must be fixed safely. Check correct position and safe fixation of LED lamp within the lamp holder. 35
- The replacement of the lamp in the headlamp requires inspection and eventually adjustment of headlamp setting by a qualified garage. 36
- Consider the polarity of the headlamp bullb: Please check the function of bulb before final installation into the headlamp housing. If needed, Please refit the bulb the other way around.
General guidelines-Safety
- The replacement of the halogen lamp by an LED light source may effect the deicing and defogging behavior of the headlamp. 39
- The LED light intensity is very high while turned on. Do not look directly into the beam to avoid damage to the eyes.
- Please wear safety glassed while replacing halogen lamp. 4)
- Lamps will heat up during operation. Do not touch. Please let it cool 42 down in order to avoid potential injury due to contact with hot surface.
- Please wear safety gloves to avoid injuries during mounting. 43
- Keep out of reach of children. 4
| Section | EN |
|---|---|
| ① | Do not touch! |
instructions of the CANbus adpater
②| Please check car installation manual and follow instructions for lamp
replacement| ㉔| Print the certificate
③| Low beam / high beam| ㉕| How to get general type approval (AGB) for use in
your vehicle on public roads
④| Off| ㉖| Scan the QR code on the top of the packaging to authenticate the
product and download the certificate.
⑤| H4 headlamp with rubber cap and clip| ㉗| Print out the approval document
(ABG).
⑥| H4 headlamp with soft cap and clip| ㉘| Keep the approval certificate(ABG)
at all times with you in the vehicle.
⑦| H4 headlamp with hard cover and clip| ㉙| In countries where applicable:
paste the sticker on the headlight unit next to the engine compartment / under
the handlebar.
⑧| H4 headlamp with hard cover and spring| ㉚| You are responsible to comply
with all applicable legal requirements.
⑨| H7 headlamp with hard cover and clip| ㉛| Approved for road traffi c for
selected countries and vehicle models only. Check your country/vehicle at:
Philips.com/roadlegalLED.
⑩| H7 headlamp with hard cover and spring| 32| General guidelines
⑪|
Rubber cap
| 33| This LED replacement light source is only approved for right-hand traffi
c. Before entering a country with left-hand traffi c, the LED lamp must be
replaced by a halogen lamp.
⑫| Disconnect cable| 34| Please check car installation manual and follow the
instructions for lamp replacement.
⑬|
Remove rubber cap
| 35| The LED light source, cables and components must be mounted in a way
that the headlamp won‘t be damaged and that its function is maintained. All
parts must be fixed safely. Check correct position and safe fixation of LED
lamp within the lamp holder.
⑭| Reinstate rubber cap| 36| The replacement of the lamp in the headlamp
requires
inspection and eventually adjustment of headlamp setting by a qualified garage.
⑮|
Insert lamp, turn into final position
| 37| Consider polarity of LED bulb:
Please check function of bulb before final installation into the headlamp housing. If needed, Please refit the bulb the other way around.
⑯| Cut 20mm circle with scissors| 38| General guidelines-Safety
⑰| Hard plastic cap| 39| The replacement of the halogen lamp by an LED light
source may affect the deicing and defogging behavior of the headlamp.
⑱| Turn into final position| 40| The LED light intensity is very high while
turned on. Do not look directly into the beam to avoid damage to the eyes.
⑲| Spring| 41| Please wear safety glasses while replacing halogen lamps.
⑳| Test| 42| Lamps will heat up during operation. Do not touch. Please let it
cool down in order to avoid potential injury due to contact with hot surface.
㉑| Detailed information in the specific instal- lation instructions of the
adpater| 43| Please wear safety gloves to avoid injuries during mounting.
㉒| Please check the allowed scope of application with the compatibility of
your vehicle.| 44|
Keep out of reach of children.
Lumileds is the warrantor of this product. 2023 © Lumileds Holding B.V. All rights reserved. Philips and the Philips Shield Emblem are registered trademarks of Koninklijke Philips N.V. and are used under license.
- This LED replacement light source is only approved for right-hand traffic. Before entering a country with left-hand traffic, the LED lamp must be replaced by a halogen lamp. 33
- Please check car installation manual and follow instructions for lamp replacement.
- The LED light source, cables and components must be mounted in a way that the headlamp won’t be damaged and that its function is maintained. All parts must be fixed safely. Check correct position and safe fixation of LED lamp within the lamp holder. 35
- The replacement of the lamp in the headlamp requires inspection and eventually adjustment of headlamp setting by a qualified garage. 36
- Consider the polarity of the headlamp bullb: Please check the function of bulb before final installation into the headlamp housing. If needed, Please refit the bulb the other way around.
General guidelines-Safety
- The replacement of the halogen lamp by an LED light source may effect the deicing and defogging behavior of the headlamp. 39
- The LED light intensity is very high while turned on. Do not look directly into the beam to avoid damage to the eyes.
- Please wear safety glassed while replacing halogen lamp. 4)
- Lamps will heat up during operation. Do not touch. Please let it cool 42 down in order to avoid potential injury due to contact with hot surface.
- Please wear safety gloves to avoid injuries during mounting. 43
- Keep out of reach of children. 4
| Section | EN |
|---|---|
| ① | Do not touch! |
instructions of the CANbus adpater
②| Please check car installation manual and follow instructions for lamp
replacement| ㉔| Print the certificate
③| Low beam / high beam| ㉕| How to get general type approval (AGB) for use in
your vehicle on public roads
④| Off| ㉖| Scan the QR code on the top of the packaging to authenticate the
product and download the certificate.
⑤| H4 headlamp with rubber cap and clip| ㉗| Print out the approval document
(ABG).
⑥| H4 headlamp with soft cap and clip| ㉘| Keep the approval certificate(ABG)
at all times with you in the vehicle.
⑦| H4 headlamp with hard cover and clip| ㉙| In countries where applicable:
paste the sticker on the headlight unit next to the engine compartment / under
the handlebar.
⑧| H4 headlamp with hard cover and spring| ㉚| You are responsible to comply
with all applicable legal requirements.
⑨| H7 headlamp with hard cover and clip| ㉛| Approved for road traffi c for
selected countries and vehicle models only. Check your country/vehicle at:
Philips.com/roadlegalLED.
⑩| H7 headlamp with hard cover and spring| 32| General guidelines
⑪|
Rubber cap
| 33| This LED replacement light source is only approved for right-hand traffi
c. Before entering a country with left-hand traffi c, the LED lamp must be
replaced by a halogen lamp.
⑫| Disconnect cable| 34| Please check car installation manual and follow the
instructions for lamp replacement.
⑬|
Remove rubber cap
| 35| The LED light source, cables and components must be mounted in a way
that the headlamp won‘t be damaged and that its function is maintained. All
parts must be fixed safely. Check correct position and safe fixation of LED
lamp within the lamp holder.
⑭| Reinstate rubber cap| 36| The replacement of the lamp in the headlamp
requires
inspection and eventually adjustment of headlamp setting by a qualified garage.
⑮|
Insert lamp, turn into final position
| 37| Consider polarity of LED bulb:
Please check function of bulb before final installation into the headlamp housing. If needed, Please refit the bulb the other way around.
⑯| Cut 20mm circle with scissors| 38| General guidelines-Safety
⑰| Hard plastic cap| 39| The replacement of the halogen lamp by an LED light
source may affect the deicing and defogging behavior of the headlamp.
⑱| Turn into final position| 40| The LED light intensity is very high while
turned on. Do not look directly into the beam to avoid damage to the eyes.
⑲| Spring| 41| Please wear safety glasses while replacing halogen lamps.
⑳| Test| 42| Lamps will heat up during operation. Do not touch. Please let it
cool down in order to avoid potential injury due to contact with hot surface.
㉑| Detailed information in the specific instal- lation instructions of the
adpater| 43| Please wear safety gloves to avoid injuries during mounting.
㉒| Please check the allowed scope of application with the compatibility of
your vehicle.| 44|
Keep out of reach of children.
Lumileds is the warrantor of this product. 2023 © Lumileds Holding B.V. All rights reserved. Philips and the Philips Shield Emblem are registered trademarks of Koninklijke Philips N.V. and are used under license.