FISHER PAYKEL DD24DI9 N Integrated Double Dish Drawer Installation Guide
- June 17, 2024
- Fisher & Paykel
Table of Contents
INTEGRATED DOUBLE DISHDRAWER
PLANNING GUIDE
DD24DI9 N | DD24DHI9 N
DD24DTI9 N
PLANNING GUIDE | INTEGRATED DOUBLE DISHDRAWER
DD24DI9 N | DD24DHI9 N | DD24DTI9 N | DD24DTX6I1 | DD24DTX6HI1
This comprehensive Planning Guide provides you with the framework and tools to
achieve your desired design outcome with Fisher & Paykel appliances. In this
guide, you will find a range of conceptual, detailed, and dimensional product
information to bring your ideas to life and create spaces that truly reflect
your vision.
The models shown in this Planning Guide may not be available in all markets
and are subject to change at any time. Product specifications may vary from
those shown. This Planning Guide should not be used as installation guidance
for any product. Further information is required to safely and correctly
install the products featured here. Specific installation guidance will be
available on our website fisherpaykel.com
DESIGN CHOICES
SIZE & INTERIOR| MODELS|
---|---|---
| Standard Height| Tall Height
Double DishDrawer Standard| DD24DI9 N, DD24DHI9 N|
Double DishDrawer Tall| | DD24DTI9 N
Double DishDrawer Tall with Stainless Steel Interior + Soft Close| |
DD24DTX6I1, DD24DTX6HI1
*Water softener models in selected markets only| |
Note: Custom door panels, toekick and handles to be manufactured / fitted by cabinetmaker.
DOOR PANEL MODELS
| Standard Height| Tall Height
---|---|---
Stainless Steel Door Panels| ADDD24DPX| ADDD24DTPX
Recessed Handle Stainless Steel Door Panels| | ADDD24DTNX
Recessed Handle Matte Black Glass Door Panels| | ADDD24DTZB
*Coming soon and in some markets available as pre-finished models| |
**HANDLE MODELS***
| Brushed Aluminium| Stainless Steel| Brass and Dark Dark Copper
---|---|---|---
1 Contemporary Square Handle| AHD3OBDD60S| |
2 Contemporary Square Fine Handle| AHD5OBDD60SX| |
3 Contemporary Round Handle| AHSOBDD60S| |
4 Classic Handle| | AHCLDDDW24X|
5 Professional Flush| | AHP3DWDDSX|
- Professional Flush Handle Brass| | | AHP3DDDW24BA
- Professional Flush Handle Dark Copper*| | | AHP3DDDW24DC
*Two Handle kits required for Double Dishdrawers
Handles can be applied to double DishDrawer models with Custom Door Panels or
Stainless Steel Door Panels
(Handles are not required for the Recessed Door Panels)
Not all handles may be available in all markets.
TOE KICK
| Standard Height | Toe kicks supplied with product |
|---|---|
| DD24DI9, DD24DHI9 | 1 Flush Pre-finished Toe Kick* |
| 3 Custom Panel Bracket** | |
| Tall Height | Toe kicks supplied with product |
| DD24DTI9 | 1 Flush Pre-finished Toe Kick* |
| 3 Custom Toe Kick Bracket | |
| Tall Height | Toe kicks supplied with product |
| DD24DTX6I1, DD24DTX6HI1 | 2 Recessed Pre-finished Toe (can be used to attach |
the custom toe kick)
For a 13/16” – 1 7/16” recess from front of door bracket to front of toe kick panel
*For a 1 9/16” – 3 15/16” recess from front of door bracket to front of toe
kick panel
DATA SHEETS DD24DI9 N & DD24DHI9 N
DATA SHEET | INTEGRATED DOUBLE DISHDRAWER Stainless Steel Door Panels 
Model nos:
DD24DI9 N & DD24DHI9 N
Shown with Stainless Steel Panels, ADDD24DPX
Shown with Contemporary Square Fine Handle, AHD5OBDD60SX
Product includes the following Toe Kicks:
- Flush Pre-Finished Toe Kick
- Custom Toe Kick bracket
NOTE: Refer to page 4 – Design Choices for all door panel and handle options
| Product Dimensions | inch | mm |
|---|---|---|
| a Overall height of product* | 32 1/4 – 34 5/8 | 820 – 880 |
| B Overall width of product | 23 9/16 | 599 |
| c Overall depth of product (without handle and door panel) | 21 3/4 | 553 |
| D Height of chassis | 31 15/16 | 811 |
| e Depth of chassis | 21 3/4 | 553 |
| f Height of feet* | 3/8 – 2 3/4 | Oct-70 |
| g Flush pre-finished toe kick panel height (customisable) 2 | 5 | 127 |
| h Toe kick panel width | 23 7/15 | 596 |
| i Flush pre-finished toe kick panel depth 1 | 8-May | 16 |
j Flush pre-finished toe kick recess depth 1
Custom toe kick bracket recess depth 2**| 13/16 – 3 1/8 1 9/16 – 3 15/16| 20 –
80 40 – 100
k Height of upper door panel| 15 11/16| 398
l Height of lower door panel| 12 1/4| 311
m Height of toe kick space| 2144-4 5/8| 58 – 118
n Maximum extension of drawer| 20 3/4| 527
o Depth of door panel| 16-Nov| 18
p Height of door panels| 28 1/4| 717
q Door panel width| 23 7/16| 595
*Depending on adjustment of levelling feet
**Excluding custom toe kick panel
| Minimum Clearances | inch | mm |
|---|---|---|
| Minimum inside height of cavity* | 32 9/32 | 820 |
| Minimum inside width of cavity | 23 5/8 | 600 |
| Minimum overall depth of cavity** | 22 1/16 | 560 |
| Minimum clearance to corner cupboard | 2-Jan | 13 |
| Minimum clearance to adjacent cupboard door | 16-Jan | 2 |
INDICATES PRODUCT DATUM —————————
INDICATES CABINETRY CLEARANCES ———————–
IMPORTANT NOTE: Throughout this guide, dimensions may vary by ±2mm (1/16”).
Please read the installation manual for detailed information on installing the
product.
For full installation instructions & specifications visit
fisherpaykel.com
Model nos:
DD24DI9 N & DD24DHI9 N
Shown with Custom Door Panels
Shown with Contemporary Square Fine Handle, AHD5OBDD60SX
Product includes the following Toe Kicks:
- Flush Pre-Finished Toe Kick
- Custom Toe Kick bracket
NOTE: Refer to page 4 – Design Choices for all door panel and handle options
| Product Dimensions | inch | mm |
|---|---|---|
| a Overall height of product* | 32 1/4 – 34 5/8 | 820 – 880 |
| B Overall width of product | 23 9/16 | 599 |
| c Overall depth of product (without handle and door panel) | 21 3/4 | 553 |
| D Height of chassis | 31 15/16 | 811 |
| e Depth of chassis | 21 3/4 | 553 |
| f Height of feet* | 3/8 – 2 3/4 | 10-70 |
| g Flush pre-finished toe kick panel height (customisable) 2 | 5 | 127 |
| h Toe kick panel width | 23 7/15 | 596 |
| i Flush pre-finished toe kick panel depth 1 | 5-8 | 16 |
j Flush pre-finished toe kick recess depth 1
Custom toe kick bracket recess depth 2**| 13/16 – 3 1/8
1 9/16 – 3 15/16| 20 – 80
40 – 100
k Height of upper door panel| 15 11/16| c
l Height of lower door panel| 12 1/4| 311
m Height of toe kick space| 2 1/4 – 4 5/8| 58 – 118
n Maximum extension of drawer| 20 3/4| 527
o Depth of door panel| 16-Nov| 18
p Height of door panels| 28 1/4| 717
q Door panel width| 23 7/16| 595
*Depending on adjustment of levelling feet
**Excluding custom toe kick panel
| Minimum Clearances | inch | mm |
|---|---|---|
| Minimum inside height of cavity* | 32 9/32 | 820 |
| Minimum inside width of cavity | 23 5/8 | 600 |
| Minimum overall depth of cavity** | 22 1/16 | 560 |
| Minimum clearance to corner cupboard | 1 – 2 | 13 |
| Minimum clearance to adjacent cupboard door | 1 – 16 | 2 |
NOTE: Custom door panel and toe kicks to be manufactured/fitted by
cabinetmaker.
INDICATES PRODUCT DATUM ————————————–
INDICATES CABINETRY CLEARANCES —————————-
IMPORTANT NOTE: Throughout this guide, dimensions may vary by ±2mm (1/16”).
Please read the installation manual for detailed information on installing the
product. For full installation instructions & specifications visit
fisherpaykel.com
DATA SHEET | INTEGRATED DOUBLE DISHDRAWER Glass Recessed Handle Matte Black
Door Panels 
Model nos:
DD24DI9 N & DD24DHI9 N
Shown with Recessed Handle Matte Black Glass Panels, ADDD24DZB
Product includes the following Toe Kicks:
- Flush Pre-Finished Toe Kick
- Custom Toe Kick bracket
NOTE: Refer to page 4 – Design Choices for all door panel and handle options
| Product Dimensions | inch | mm |
|---|---|---|
| a Overall height of product* | 32 1/4 – 34 5/8 | 820 – 880 |
| B Overall width of product | 23 9/16 | 599 |
| c Overall depth of product (without door panel) | 21 3/4 | 553 |
| D Height of chassis | 31 15/16 | 811 |
| e Depth of chassis*** | 21 3/4 | 553 |
| f Height of feet* | 3/8 – 2 3/4 | 10-70 |
| g Flush pre-finished toe kick panel height (customisable) 2 | 5 | 127 |
| h Toe kick panel width | 23 7/15 | 596 |
| i Flush pre-finished toe kick panel depth 1 | 5-8 | 16 |
j Flush pre-finished toe kick recess depth 1
Custom toe kick bracket recess depth 2**| 13/16 – 3 1/8
1 9/16 – 3 15/16| 20 – 80
40 – 100
k Height of upper door panel| 15 11/16| 398
l Height of lower door panel| 12 3/16| 309
m Height of toe kick space| 2 1/4 – 4 5/8| 58 – 118
n Maximum extension of drawer| 20 3/4| 527
o Depth of door panel| 13/16| 20
p Height of door panels| 28 1/4| 717
q Door panel width| 23 7/16| 595
Depending on adjustment of levelling feet
Excluding custom toe kick panel
Max. 9/16″ bench overhang recommended
| Minimum Clearances | inch | mm |
|---|---|---|
| Minimum inside height of cavity* | 32 9/32 | 820 |
| Minimum inside width of cavity | 23 5/8 | 600 |
| Minimum overall depth of cavity** | 22 1/16 | 560 |
| Minimum clearance to corner cupboard | 1/2 | 13 |
| Minimum clearance to adjacent cupboard door | 1/16 | 2 |
*Depending on adjustment of levelling feet
**Including 3/4″ (19mm) door panels on adjacent cabinetry
INDICATES PRODUCT DATUM ——————————————–
INDICATES CABINETRY CLEARANCES —————————————–
IMPORTANT NOTE: Throughout this guide, dimensions may vary by ±2mm (1/16”).
Please read the installation manual for detailed information on installing the
product. For full installation instructions & specifications visit
fisherpaykel.com
TOE KICK INFORMATION | INTEGRATED DOUBLE DISHDRAWER 
Model no:
DD24DI9 N & DD24DHI9 N
Shown with Stainless Steel Door Panels ADDD24DPX
| 1 Flush Pre-Finished Toe Kick Depth Consideration | inch | mm |
|---|---|---|
| a Toe kick panel height* | 2 1/4 – 4 5/8 | 58 – 118 |
| b Minimum clearance between toe kick panel and floor | 1/2 | 12 |
| c Depth of toe kick recess | 13/16 – 3 1/8 | 20 – 80 |
| 2a Custom toe kick panel (recess depth 15 3/4″) | inch | mm |
| --- | --- | --- |
| C) Toe kick panel height | 21/4 – 4 5/8 | 58 – 118 |
| C) Minimum clearance between toe kick panel and floor | 1/2 | 12 |
| © Minimum toe kick panel depth (thickness)** | 3/8 | 9 |
| C) Depth of toe kick recess*** | 1 9/16 | 40 |
| 2b Custom toe kick panel (recess depth 1 9/16″ – 3 7/15″) | inch |
mm
A Toe kick panel height*| 21/4 – 4 5/8| 58 – 118
B Minimum clearance between toe kick panel and floor| 1/2| 12
C Minimum toe kick panel depth (thickness)| 3/8| 9
D Depth of toe kick recess”| 1 9/16 – 3 7/15| 40 – 88
|
2c Custom toe kick panel (recess depth 3 7/15″ – 3 15/16″)| inch|
Min
A Toe kick panel height| 21/4 – 4 5/8| 58 – 118
B Minimum clearance between toe kick panel and floor| 1/2| 12
C Minimum toe kick panel depth (thickness)| 3/8| 9
D Depth of toe kick recess***| i3 7/15 – 3 15/16| 88 – 100
Toe kick panel should be adjusted accordingly
If using supplied toe kick mounting screws. Panel can be fixed via screwing
or gluing to the supplied mounting bracket
Excluding custom panel and handle
NOTE: For full installation and clearance details please refer to the
installation guide.
IMPORTANT NOTE : Throughout this guide, dimensions may vary by ±2mm
(1/16”).
Please read the installation manual for detailed information on installing the
product. For full installation instructions & specifications visit
fisherpaykel.com
DATA SHEETS DD24DTI9 N
DATA SHEET | INTEGRATED DOUBLE DISHDRAWER Tall Stainless Steel Door Panels
Model nos:
DD24DTI9 N
Shown with Stainless Steel Door Panels, ADDD24DTPX
Shown with Contemporary Square Fine Handle, AHD5OBDD60SX
Product includes the following Toe Kicks:
- Flush Pre-Finished Toe Kick
- Custom Toe Kick bracket
NOTE: Refer to page 4 – Design Choices for all door panel and handle options
| Product Dimensions | Inch | mm |
|---|---|---|
| A Overall height of product’ | 34 1/16 – 36 7/16 | 865 – 925 |
| B Overall width of product | 23 9/16 | 599 |
| C Overall depth of product(without handle and door panel) | 21 3/4 | 553 |
| D Height of chassis | 33 11/16 | 855 |
| E Depth of chassis | 21 3/4 | 553 |
| F Height of feet’ | 3/8 – 2 3/4 | 10 – 70 |
G Flush pre-finished toe kick height 1
Custom toe kick bracket height 2| 1 3/4 – 4 13/16
1 3/4 – 4 13/16| 45 – 123
45 – 123
H Toe kick panel width| 23 7/15| 596
I Flush pre-finished toe kick panel depth 1| 5/8| 16
J Flush pre-finished toe kick recess depth 1
Custom toe kick bracket recess depth 2| 13/16 – 3 1/8
1 9/16 – 3 15/16| 20 – 80
40 – 100
K Height of upper door panel| 17 13/32| 442
L Height of lower door panel| 12 1/4| 311
M Height of toe kick space| 21/4 – 45/8| 58 -118
N Maximum extension of drawer”| 20 3/4| 527
O Depth of door panel| 11/16| 18
P Height of door panels| 29 31/32| 761
Q Door panel width| I 23 7/16| 595
Minimum Clearances| inch| mm*
---|---|---
Minimum inside height of cavity| 34 1/16| 865
Minimum inside width of cavity| 23 5/8| 600
Minimum overall depth of cavity**| 22 3/4| 578
Minimum clearance to corner cupboard| 1/2| 13
Minimum clearance to adjacent cupboard door| 1/16| 2
INDICATES PRODUCT DATUM
INDICATES CABINETRY CLEARANCES
IMPORTANT NOTE : Throughout this guide, dimensions may vary by ±2mm
(1/16”). Please read the installation manual for detailed information on
installing the product. For full installation instructions & specifications
visit fisherpaykel.com
DATA SHEET | INTEGRATED DOUBLE DISHDRAWER Tall 24″ Custom Door Panels
Model nos:
DD24DTI9 N
Shown with Custom Door Panels
Shown with Contemporary Square Fine Handle, AHD5OBDD60SX
Product includes the following Toe Kicks:
- Flush Pre-Finished Toe Kick
- Custom Toe Kick bracket
NOTE: Refer to page 4 – Design Choices for all door panel and handle options
| Product Dimensions | inch | mm |
|---|---|---|
| A Overall height of product* | 34 1/16 – 36 7/16 | 865 – 925 |
| B Overall width of product | 23 9/16 | 599 |
| C Overall depth of product(without handle and door panel) | 21 3/4 | 553 |
| D Height of chassis | 33 11/16 | 855 |
| E Depth of chassis | 21 3/4 | 553 |
| F Height of feet* | 3/8 – 2 3/4 | 10 – 70 |
G Flush pre-finished toe kick height 1
Custom toe kick bracket height 2| 1 3/4 – 4 13/16
1 3/4 – 4 13/16| 45 – 123
45 – 123
H Toe kick panel width| 23 7/15| 596
I Flush pre-finished toe kick panel depth 1| 5/8| 16
J Flush pre-finished toe kick recess depth 1
Custom toe kick bracket recess depth 2**| 13/16 – 31/8
1 9/16 – 315/16| 20 – 80
40 – 100
K Height of upper door panel| 17 13/32| 442
L Height of lower door panel| 12 1/4| 311
M Height of toe kick space| 2 1/4 – 4 5/8| 58 – 118
N Maximum extension of drawer”| 20 3/4| 527
O Depth of door panel| 11/16| 18
P Height of door panels| 29 31/32| 761
Q Door panel width| 23 7/16| 595
*Depending on adjustment of levelling feet
Including 3/4″ (19mm) door panels on adjacent cabinetry
NOTE:** Custom door panel and toe kicks to be manufactured/fitted by
cabinetmaker.
INDICATES PRODUCT DATUM ————————————————————————-
INDICATES CABINETRY CLEARANCES —————————————————————
IMPORTANT NOTE: Throughout this guide, dimensions may vary by ±2mm (1/16”).
Please read the installation manual for detailed information on installing the
product. For full installation instructions & specifications visit
fisherpaykel.com
DATA SHEET | INTEGRATED DOUBLE DISHDRAWER Tall Recessed Handle Door Panels
Model nos:
DD24DTI9 N
Shown with Recessed Handle Stainless Steel Panels, ADDD24DTNX
Product includes the following Toe Kicks:
- Flush Pre-Finished Toe Kick
- Custom Toe Kick bracket
NOTE: Refer to page 4 – Design Choices for all door panel and handle options
| Product Dimensions | inch | mm |
|---|---|---|
| A Overall height of product* | 34 1/16 – 36 7/16 | 865 – 925 |
| B Overall width of product | 23 9/16 | 599 |
| C Overall depth of product (without door panel) | 21 3/4 | 553 |
| D Height of chassis | 33 11/16 | 855 |
| E Depth of chassis”` | 21 3/4 | 553 |
| F Height of feet* | 3/8 – 2 3/4 | 10 – 70 |
G Flush pre-finished toe kick panel height 1
Custom toe kick bracket height 2| 5
1 3/4 – 4 13/16| 127
45 – 123
H Toe kick panel width| 23 7/15| 596
I Flush pre-finished toe kick panel depth 1| 5/8| 16
J Flush pre-finished toe kick recess depth 1
Custom toe kick bracket recess depth 2| 13/16 – 3 1/8
1 9/16 – 3 15/16| 20 – 80
40 – 100
K Height of upper door panel| 17 13/32| 442
L Height of lower door panel| 12 1/4| 311
M Height of toe kick space| 21/4 – 4 5/8| 58 – 118
N Maximum extension of drawer”| 20 3/4| 527
O Depth of door panel| 13/16| 20
P Height of door panels| 29 31/32| 761
Q Door panel width| 23 7/16| 595
Minimum Clearances| inch| I mm*
---|---|---
Minimum inside height of cavity| 34 1/16| 865
Minimum inside width of cavity| 23 5/8| 600
Minimum overall depth of cavity”| 22 3/4| 578
Minimum clearance to corner cupboard| 1/2| 13
Minimum clearance to adjacent cupboard door| 1/16| I 2
INDICATES PRODUCT DATUM ————————————————————————-
INDICATES CABINETRY CLEARANCES —————————————————————
IMPORTANT NOTE: Throughout this guide, dimensions may vary by ±2mm
(1/16”).
Please read the installation manual for detailed information on installing the
product. For full installation instructions & specifications visit
fisherpaykel.com
DATA SHEET | INTEGRATED DOUBLE DISHDRAWER Tall Handle Matte Black Door Panels
Model nos:
DD24DTI9
Shown with Recessed Handle Matte Black Glass Panels, ADDD24DTZB
Product includes the following Toe Kicks:
- Flush Pre-Finished Toe Kick
- Custom Toe Kick bracket
NOTE: Refer to page 4 – Design Choices for all door panel and handle options
| Product Dimensions | inch | mm |
|---|---|---|
| A Overall height of product* | 34 1/16 – 36 7/16 | 865 – 925 |
| B Overall width of product | 23 9/16 | 599 |
| C Overall depth of product (without door panel) | 21 3/4 | 553 |
| D Height of chassis | 33 11/16 | 855 |
| E Depth of chassis*” | 21 3/4 | 553 |
| F Height of feet* | 3/8 – 2 3/4 | 10 – 70 |
G Flush pre-finished toe kick panel height 1
Custom toe kick bracket height 2| 5 1 3/4 – 4 13/16| 127 45 – 123
H Toe kick panel width| 23 7/15| 596
I Flush pre-finished toe kick panel depth 1| 5/8| 16
J Flush pre-finished toe kick recess depth 1
Custom toe kick bracket recess depth 2**| 1 13/16 – 31/8
9/16 – 3 15/16| 20 – 80
40 – 100
K Height of upper door panel| 17 13/32| 442
L Height of lower door panel| 12 1/4| 311
M Height of toe kick space| 21/4 – 4 5/8| 58 – 118
N Maximum extension of drawer”| 20 3/4| 527
O Depth of door panel| 13/16| 20
P Height of door panels| 29 31/32| 761
Q Door panel width| 23 7/16| 595
Depending on adjustment of levelling feet
Excluding custom toe kick
Max. 9/16″ (15mm) bench overhang recommended
| Minimum Clearances | inch | mm |
|---|---|---|
| Minimum inside height of cavity* | 34 1/16 | 865 |
| Minimum inside width of cavity | 23 5/8 | 600 |
| Minimum overall depth of cavity” | 22 3/4 | 578 |
| Minimum clearance to corner cupboard | 1/2 | 13 |
| Minimum clearance to adjacent cupboard door | 1/16 | 2 |
INDICATES PRODUCT DATUM ————————————————————————-
INDICATES CABINETRY CLEARANCES —————————————————————
IMPORTANT NOTE: Throughout this guide, dimensions may vary by ±2mm (1/16”).
Please read the installation manual for detailed information on installing the
product. For full installation instructions & specifications visit
fisherpaykel.com
TOE KICK INFORMATION | INTEGRATED DOUBLE DISHDRAWER Tall
Model no:
DD24DTI9 N
Shown with Stainless Steel Door Panels ADDD24DPX
| 1 Flush Pre-Finished Toe Kick Depth Consideration | inch | mm |
|---|---|---|
| A Toe kick panel height’ | 21/4 – 4 5/8 | 58 – 118 |
| B Minimum clearance between toe kick panel and floor | 1/2 | 12 |
| C Depth of toe kick recess | 13/16 – 31/8 | 20 – 80 |
| 2a Custom toe kick panel (recess depth 15 3/4″) | inch | mm |
| A Toe kick panel height | 21/4 – 4 5/8 | 58 – 118 |
| B Minimum clearance between toe kick panel and floor | 1/2 | 12 |
| C Minimum toe kick panel depth (thickness)” | 3/8 | 9 |
| D Depth of toe kick recess”‘ | 1 9/16 | 40 |
| 2b Custom toe kick panel (recess depth 1 9/16″ – 3 7/15″) | inch |
mm
A Toe kick panel height*| 21/4 – 4 5/8| 58 – 118
B Minimum clearance between toe kick panel and floor| 1/2| 12
C Minimum toe kick panel depth (thickness)”| 3/8| 9
D Depth of toe kick recess”‘| 1 9/16 – 3 7/15| 40 – 88
2C Custom toe kick panel (recess depth 3 7/15″ – 3 15/16″)| inch|
mm
A Toe kick panel height”| 21/4 – 4 5/8| 58 – 118
B Minimum clearance between toe kick panel and floor| 1/2| 12
C Minimum toe kick panel depth (thickness)”| 3/8| 9
D Depth of toe kick recess’| 3 7/15 – 3 15/16| 88 – 100
Toe kick panel should be adjusted accordingly
If using supplied toe kick mounting screws. Panel can be fixed via screwing
or gluing to the supplied mounting bracket
Excluding custom panel and handle
NOTE: For full installation and clearance details please refer to the
installation guide.
IMPORTANT NOTE: Throughout this guide, dimensions may vary by ±2mm
(1/16”).
Please read the installation manual for detailed information on installing the
product. For full installation instructions & specifications visit
fisherpaykel.com
DATA SHEETS DD24DTX6I1 & DD24DTX6IH1
DATA SHEET | INTEGRATED DOUBLE DISHDRAWER Tall Stainless Steel Door Panels
Model nos:
DD24DTX6I1 & DD24DTX6HI1
Shown with Stainless Steel Door Panels, ADDD24DTPX
Shown with Contemporary Square Fine Handle, AHD5OBDD60SX
Product includes the following Toe Kicks:
Recessed Pre-Finished Toe Kick (also used as a custom toe kick bracket)
NOTE: Refer to page 4 – Design Choices for all door panel and handle
options
| Product Dimensions | inch | mm |
|---|---|---|
| A Overall height of product* | 34 1/16 – 36 7/16 | 865 – 925 |
| B Overall width of product | 23 9/16 | 599 |
| C Overall depth of product(without handle and door panel) | 21 3/4 | 553 |
| D Height of chassis | 33 11/16 | 855 |
| E Depth of chassis | 21 3/4 | 553 |
| F Height of feet* | 3/8 – 2 3/4 | 10 – 70 |
| G Recessed pre-finished toe kick height | 1 3/4 – 4 13/16 | 45 – 123 |
| H Toe kick panel width | 23 7/15 | 596 |
| I Recessed pre-finished toe kick panel depth | 5/8 | 16 |
| J Recessed pre-finished toe kick depth** | 1 9/16 – 3 15/16 | 40 – 100 |
| K Height of upper door panel | 17 13/32 | 442 |
| L Height of lower door panel | 12 1/4 | 311 |
| M Height of toe kick space | 21/4 – 4 5/8 | 58 – 118 |
| N Maximum extension of drawer* | 20 3/4 | 527 |
| O Depth of door panel | 11/16 | 18 |
| P Height of door panels | 29 31/32 | 761 |
| Q Door panel width | 23 7/16 | 595 |
| ‘Depending on adjustment of levelling feet “Excluding custom toe kick panel | ||
| Minimum Clearances | inch | mm |
| Minimum inside height of cavity* | 34 1/16 | 865 |
| Minimum inside width of cavity | 23 5/8 | 600 |
| Minimum overall depth of cavity” | 22 3/4 | 578 |
| Minimum clearance to corner cupboard | 1/2 | 13 |
| Minimum clearance to adjacent cupboard door | 1/16 | 2 |
*Depending on adjustment of levelling feet
**Including 3/4″ (19mm) door panels on adjacent cabinetry
DATA SHEET | INTEGRATED DOUBLE DISHDRAWER Tall Custom Door Panels
Model nos:
DD24DTX6I1 & DD24DTX6HI1
Shown with Custom Door Panels
Shown with Contemporary Square Fine Handle, AHD5OBDD60SX
Product includes the following Toe Kicks:
Recessed Pre-Finished Toe Kick (also used as a custom toe kick bracket)
NOTE: Refer to page 4 – Design Choices for all door panel and handle
options
| Product Dimensions | inch | mm |
|---|---|---|
| A Overall height of product* | 34 1/16 – 36 7/16 | 865 – 925 |
| B Overall width of product | 23 9/16 | 599 |
| C Overall depth of product(without handle and door panel) | 21 3/4 | 553 |
| D Height of chassis | 33 11/16 | 855 |
| E Depth of chassis | 21 3/4 | 553 |
| F Height of feet* | 3/8 – 2 3/4 | 10 – 70 |
| G Recessed pre-finished toe kick height | 1 3/4 – 4 13/16 | 45 – 123 |
| H Toe kick panel width | 23 7/15 | 596 |
| I Recessed pre-finished toe kick panel depth | 5/8 | 16 |
| J Recessed pre-finished toe kick depth** | 1 9/16 – 3 15/16 | 40 – 100 |
| K Height of upper door panel | 17 13/32 | 442 |
| L Height of lower door panel | 12 1/4 | 311 |
| M Height of toe kick space | 21/4 – 4 5/8 | 58 – 118 |
| N Maximum extension of drawer** | 20 3/4 | 527 |
| O Depth of door panel | 11/16 | 18 |
| P Height of door panels | 29 31/32 | 761 |
| Q Door panel width | 23 7/16 | 595 |
| ‘Depending on adjustment of levelling feet “Excluding custom toe kick panel | ||
| Minimum Clearances | inch | mm |
| Minimum inside height of cavity* | 34 1/16 | 865 |
| Minimum inside width of cavity | 23 5/8 | 600 |
| Minimum overall depth of cavity** | 22 3/4 | 578 |
| Minimum clearance to corner cupboard | 1/2 | 13 |
| Minimum clearance to adjacent cupboard door | 1/16 | 2 |
DATA SHEET | INTEGRATED DOUBLE DISHDRAWER Tall Glass Recessed Handle Door Panels
Model nos:
DD24DTX6I1 & DD24DTX6HI1
Shown with Recessed Handle Stainless Steel Panels, ADDD24DTNX
Product includes the following Toe Kicks:
Recessed Pre-Finished Toe Kick (also used as a custom toe kick bracket)
NOTE: Refer to page 4 – Design Choices for all door panel and handle
options
| Product Dimensions | inch | mm |
|---|---|---|
| A Overall height of product* | 34 1/16 – 36 7/16 | 865 – 925 |
| B Overall width of product | 23 9/16 | 599 |
| C Overall depth of product(without handle and door panel) | 21 3/4 | 553 |
| D Height of chassis | 33 11/16 | 855 |
| E Depth of chassis | 21 3/4 | 553 |
| F Height of feet* | 3/8 – 2 3/4 | 10 – 70 |
| G Recessed pre-finished toe kick height | 1 3/4 – 4 13/16 | 45 – 123 |
| H Toe kick panel width | 23 7/15 | 596 |
| I Recessed pre-finished toe kick panel depth | 5/8 | 16 |
| J Recessed pre-finished toe kick depth** | 1 9/16 – 3 15/16 | 40 – 100 |
| K Height of upper door panel | 17 13/32 | 442 |
| L Height of lower door panel | 12 1/4 | 311 |
| M Height of toe kick space | 21/4 – 4 5/8 | 58 – 118 |
| N Maximum extension of drawer** | 20 3/4 | 527 |
| O Depth of door panel | 11/16 | 18 |
| P Height of door panels | 29 31/32 | 761 |
| Q Door panel width | 23 7/16 | 595 |
Depending on adjustment of levelling feet
Excluding custom toe kick
Max. 9/16″ (15mm) bench overhang recommended| |
Minimum Clearances| inch| mm
Minimum inside height of cavity*| 34 1/16| 865
Minimum inside width of cavity| 23 5/8| 600
Minimum overall depth of cavity**| 22 3/4| 578
Minimum clearance to corner cupboard| 1/2| 13
Minimum clearance to adjacent cupboard door| 1/16| 2
*Depending on adjustment of levelling feet
**Including 3/4″ (19mm) door panels on adjacent cabinetry
DATA SHEET | INTEGRATED DOUBLE DISHDRAWER Tall Glass Recessed Handle Door Panels
Model nos:
DD24DTX6I1 & DD24DTX6HI1
Shown with Recessed Handle Matte Black Glass Panels, ADDD24DTZB
Product includes the following Toe Kicks:
Recessed Pre-Finished Toe Kick (also used as a custom toe kick bracket)
NOTE: Refer to page 4 – Design Choices for all door panel and handle
options
| Product Dimensions | inch | mm |
|---|---|---|
| A Overall height of product* | 34 1/16 – 36 7/16 | 865 – 925 |
| B Overall width of product | 23 9/16 | 599 |
| C Overall depth of product(without handle and door panel) | 21 3/4 | 553 |
| D Height of chassis | 33 11/16 | 855 |
| E Depth of chassis | 21 3/4 | 553 |
| F Height of feet* | 3/8 – 2 3/4 | 10 – 70 |
| G Recessed pre-finished toe kick height | 1 3/4 – 4 13/16 | 45 – 123 |
| H Toe kick panel width | 23 7/15 | 596 |
| I Recessed pre-finished toe kick panel depth | 5/8 | 16 |
| J Recessed pre-finished toe kick depth** | 1 9/16 – 3 15/16 | 40 – 100 |
| K Height of upper door panel | 17 13/32 | 442 |
| L Height of lower door panel | 12 1/4 | 311 |
| M Height of toe kick space | 21/4 – 4 5/8 | 58 – 118 |
| N Maximum extension of drawer** | 20 3/4 | 527 |
| O Depth of door panel | 11/16 | 18 |
| P Height of door panels | 29 31/32 | 761 |
| Q Door panel width | 23 7/16 | 595 |
Depending on adjustment of levelling feet
Excluding custom toe kick
Max. 9/16″ (15mm) bench overhang recommended| |
Minimum Clearances| inch| mm
Minimum inside height of cavity*| 34 1/16| 865
Minimum inside width of cavity| 23 5/8| 600
Minimum overall depth of cavity**| 22 3/4| 578
Minimum clearance to corner cupboard| 1/2| 13
Minimum clearance to adjacent cupboard door| 1/16| 2
TOE KICK INFORMATION | INTEGRATED DOUBLE DISHDRAWER Tall
RECESSED PRE-FINISHED TOE KICK
RECESSED PRE-FINISHED TOE KICK WITH CUSTOM TOE KICK PANEL
Model no:
DD24DTX6I1 & DD24DTX6HI1
| Recessed Pre-Finished Toe Kick Depth | inch | mm |
|---|---|---|
| a Toe kick panel height | 1 3/4 – 4 13/16 | 45 – 123 |
| b Minimum clearance between toe kick panel and floor | 1/2 | 12 |
| C Depth of toe kick recess* | 1 9/16 – 3 15/16 | 40 – 100 |
*Back of door to front of toe kick
| Recessed Pre-Finished Toe Kick Depth with Custom Toe Kick Panel | inch | MIT |
|---|---|---|
| A | Toe kick panel height | 1 3/4 – 4 13/16 |
| B | Minimum clearance between toe kick panel and floor | 1/2 |
| C | Minimum toe kick panel depth (thickness) | min 3/8 |
| D | Depth of toe kick recess* | 13/ 16 – 3 3/16 |
*Back of door to front of custom toe kick, assuming a 3/4″ (19mm) thick custom toe kick panel is used
NOTE: For full installation and clearance details please refer to the
installation guide.
IMPORTANT NOTE : Throughout this guide, dimensions may vary by ±2mm
(1/16”).
Please read the installation manual for detailed information on installing the
product. For full installation instructions & specifications visit
fisherpaykel.com
HANDLE KITS
DATA SHEET | HANDLES Contemporary Square
Model no:
Square Handle AHD3OBDD60S
For Models:
DD24DI9 N, DD24DHI9 N, DD24DTI9 N, DD24DTX6I1, DD24DTX6HI1
Compatible with door panel kits:
Square Handle for Door Panel Kits ADDD24DPX, ADDD24DTPX
| Handle Dimensions | inch | mm |
|---|---|---|
| A Overall length of handle | 221/4 | 565 |
| B Overall depth of handle | 1 5/8 | 41 |
| C Overall height of handle | 5/8 | 16 |
| D Length of off-stand | 3 15/16 | 100 |
| E Distance between attachment holes between each off-stand | 11/4 | 32 |
| F Distance from centerline to inner attachment holes | 81/2 | 216 |
| G Distance from centerline to outer attachment holes | 9 25/32 | 249. |
| H Distance between inner attachment holes | 17 | 432 |
| I Distance between outer attachment holes | 19 9/16 | 497 |
| J Thickness of handle rail | 5/8 | 16 |
DishDrawer Double – the dimensions are the same for both handles
Suits standard 3/4″ (19mm) panel. Thicker panels may require counterboring or longer screws
Note:
Single DishDrawer requires one handle kit, double DishDrawer requires two
handle kits
INDICATES PRODUCT DATUM ————————————————————————–
IMPORTANT NOTE: Throughout this guide, dimensions may vary by ±2mm (1/16”).
Please read the installation manual for detailed information on installing the
product. For full installation instructions & specifications visit
fisherpaykel.com
DATA SHEET | HANDLES Contemporary Square Fine
Model no:
Square Fine Handle AHD5OBDD60SX
For Models:
DD24DI9 N, DD24DHI9 N, DD24DTI9 N, DD24DTX6I1, DD24DTX6HI1
Compatible with door panel kits:
Square Fine Handle for Door Panel Kits ADDD24DPX, ADDD24DTPX
| Handle Dimensions | inch | mm |
|---|---|---|
| A Overall length of handle | 221/4 | 565 |
| B Overall depth of handle | 1 5/8 | 41 |
| C Overall height of handle | 19/32 | 15 |
| D Length of off-stand | 3 15/16 | 100 |
| E Distance between attachment holes between each off-stand | 11/4 | 32 |
| F Distance from centerline to inner attachment holes | 81/2 | 216 |
| G Distance from centerline to outer attachment holes | 9 25/32 | 249. |
| H Distance between inner attachment holes | 17 | 432 |
| I Distance between outer attachment holes | 19 9/16 | 497 |
| J Thickness of handle rail | 5/8 | 16 |
DishDrawer Double – the dimensions are the same for both handles
Suits standard 3/4″ (19mm) panel. Thicker panels may require counterboring or longer screws
Note:
Single DishDrawer requires one handle kit, double DishDrawer requires two
handle kits.
DATA SHEET | HANDLES Contemporary Round
Model no:
Round Handle AHSOBDD60S
For Models:
DD24DI9 N, DD24DHI9 N, DD24DTI9 N, DD24DTX6I1, DD24DTX6HI1
Compatible with door panel kits:
Round Handle for Door Panel Kits ADDD24DPX, ADDD24DTPX
| Handle Dimensions | inch | mm |
|---|---|---|
| C) Overall length of handle | 221/4 | 565 |
| C) Overall depth of handle | 1 5/8 | 41 |
| © Overall height of handle | 21/32 | 17 |
| © Length of off-stand | 3 15/16 | 100 |
| C) Distance between attachment holes between each off-stand | 11/4 | 32 |
| C) Distance from centerline to inner attachment holes | 81/2 | 216 |
| © Distance from centerline to outer attachment holes | 9 25/32 | 249. |
| C) Distance between inner attachment holes | 17 | 432 |
| C) Distance between outer attachment holes | 19 9/16 | 497 |
| © Thickness of handle rail | 5/8 | 16 |
DishDrawer Double – the dimensions are the same for both handles
Suits standard 3/4″ (19mm) panel. Thicker panels may require counterboring or longer screws
Note:
Single DishDrawer requires one handle kit, double DishDrawer requires two
handle kits.
DATA SHEET | HANDLES Professional Round Flush
Model no:
Professional Flush Handle AHP3DWDDSX
Professional Flush Handle Brass AHP3DDDW24BA
Professional Flush Handle Dark Copper AHP3DDDW24DC
For Models:
DD24DI9 N, DD24DHI9 N, DD24DTI9 N, DD24DTX6I1, DD24DTX6HI1
Compatible with door panel kits:
Professional Round Flush Handle for Door Panel Kits ADDD24DPX, ADDD24DTPX
| Handle Dimensions | inch | mm |
|---|---|---|
| A Overall length of handle | 20 9/32 | 515 |
| B Overall depth of handle | 2 9/32 | 58 |
| C Overall height of handle | 11/2 | 38 |
| D Length of off-stand | 2 3/8 | 60 |
| E Distance between attachment holes between each off-stand | 11/4 | 32 |
| F Distance from centerline to inner attachment holes | 81/2 | 216 |
| G Distance from centerline to outer attachment holes | 9 25/32 | 249. |
| H Distance between inner attachment holes | 17 | 432 |
| I Distance between outer attachment holes | 19 9/16 | 497 |
| J Thickness of handle rail | 1 | 25 |
DishDrawer Double – the dimensions are the same for both handles
Suits standard 3/4″ (19mm) panel. Thicker panels may require counterboring or longer screws
Note:
Single DishDrawer requires one handle kit, double DishDrawer requires two
handle kits.
DATA SHEET | HANDLES Classic Round
Model no:
Classic Round Handle AHCLDDDW24X
For Models:
DD24DI9 N, DD24DHI9 N, DD24DTI9 N, DD24DTX6I1, DD24DTX6HI1
Compatible with door panel kits:
Classic Round Handle for Door Panel Kits ADDD24DPX, ADDD24DTPX
| Handle Dimensions | inch | mm |
|---|---|---|
| A Overall length of handle | 21 7/16 | 544 |
| B Overall depth of handle | 2 3/16 | 55 |
| C Overall height of handle | 7/8 | 22 |
| D Length of off-stand | 31/8 | 80 |
| E Distance between attachment holes between each off-stand | 11/4 | 32 |
| F Distance from centerline to inner attachment holes | 81/2 | 216 |
| G Distance from centerline to outer attachment holes | 9 25/32 | 249. |
| H Distance between inner attachment holes | 17 | 432 |
| I Distance between outer attachment holes | 19 9/16 | 497 |
| J Thickness of handle rail | 13/16 | 20 |
DishDrawer Double – the dimensions are the same for both handles
Suits standard 3/4″ (19mm) panel. Thicker panels may require counterboring or longer screws
Note:
Single DishDrawer requires one handle kit, double DishDrawer requires two
handle kits.
90003206A
PLANNING GUIDE INTEGRATED DOUBLE DISHDRAWER – VERSION A – JANUARY 2024 ©
FISHER & PAYKEL LIMITED 2024
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>