Clicknget RPH-002 Rearview Mirror Phone Holder for Car User Manual
- June 17, 2024
- Clicknget
Table of Contents
Operating Instructions
Rear View Mirror Phone Holder 
RPH–002
Product Component
| 1. Crab Claws | 7. Adjustable Bracket-2 |
|---|---|
| 2. Si Ii cone pad | 8.Rotary Push Switch-2 |
| 3.Crab Clamp Locking Bar | 9. Kepala Bola Putar |
| 4.360 Degree Rotary Axis | 10.Kepala Bola Penjepit Ponsel |
| 5. Adjustable Bracket-1 | 11.Universal Extension Clip |
| 6.Rotary Push Switch-1 |
Installtion
Unscrewing the ball head nut of the cell phone clamp(lO)
Insert ball (9) through nut into groove (10)
Tighten the nuts. Installation complete
“The looseness of the nut determines the damping of the cell phone holder’s
movement.
Please adjust the tightness of the nut according to your persona habits to get
a better using experience!
Unscrew the Crab Clamp Loe king Bar (3)
Spread the crab pincers to the proper angle
Install on mirror attachment arm, tighten crab clamp locking Bar
“Please check the size of your mirrors to see if they meet the installation
requirements! 
360 degree rotary axis (4), horizontal 360 free rotation. Adjust the direction
you want%
Push the Rotary Push Switch (6.8) to easily adjust the tilt angle without any
tools.
Crab Claw Clamp Size
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>