BeNice 198789 Peel and Stick Tile Backsplash Instruction Manual
- June 17, 2024
- BeNice
Table of Contents
BeNice 198789 Peel and Stick Tile Backsplash
Before Installation
BeNice tiles can be installed over most sound surfaces if they are clean, flat, smooth, dry and free of dust, wax, grease, dirt, and soap.
For latex,repainted,or textured walls, follow these preparation instructions:
- Sand the surfaces with sanding paper
- Clean the wall with a damp cloth
- Allow surfaces to completely dry(24hours)
Applicable Surfaces
Inapplicable Surfaces
Tools
Tools needed
- Measuring tape
- Pencil
- Level
- Straightedge or Speed Square
- Sandpaper(if needed for preparation)
Tools for cutting tiles:(Chooes one)
- Utility Knife
- Scissors(Heavy Duty)
- Jig Saw
- Tin Snip
- Chop Saw
Cautions
Tiles must be installed at least 8″ away from the open flame
If your stove does not have a back panel or metal cover, it is important to leave a 8″ space between the stove and the tiles.
How to Install
-
Step1:
Thoroughly clean wall from all dust,wax,scum, and soap.Preferably use a TSP degreaser to clean Allow to dry. -
Step2:
Draw a leveled guideline on the wall. Mark at least one horizontal and one vertical guideline. -
Step3:
For the first tile, cut uneven edges to make a straight line against the corner. Do not install tile with uneven edges against the wall. -
Step4:
To cut the tiles,use your preferred tool from the recommended list and cut from the back to avoid damaging the tile. -
Step5:
Peel back the corner of the plastic protector,making sure to keep adhesive untouched.Peel back a little at a time and firmly press down where you peel. -
Step6:
Adhere the first tile firmly against the corner ,keeping in line with the guideline. -
Step7:
Continue laying the tiles, interlocking the edges against each other and overlap ping grout lines. Firmly press down on each tile to adhere to wall.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>