GREENHURST 4604 Helps Deflect the Heat Back into the Room User Guide
- June 17, 2024
- GREENHURST
Table of Contents
User Guide
4604 Helps Deflect the Heat Back into the Room
ITEM NUMBER:
4604, 24” OAK, 4609, 24”WHITE.
4605, 36” OAK, 4610 36” WHITE.
4603, 48” OAK, 4607 48” WHITE.
NOTES TO CUSTOMERS
- For ease and speed of assembly we recommend that before you commence each step of the assembly that you identify all the parts required to complete that step
- We recommend that where possible you allow sufficient space to assemble the item as close as possible to the place where it will be once assembled.
- For the protection of your furniture we recommend that the product is placed on protected surfaces during assembly to prevent damage.
- During assembly take care not to over tighten fixings as this may damage the product.
- Please ensure you retain all the product packaging until the item is assembled and you are happy. We can only accept the return of this product if it is in the original packaging.
- Please periodically check all the fittings and re-tighten as necessary.
- Never allow any liquids to remain on your furniture as absorption can cause the wood to warp or the finish to de-laminate.
- Do not over load your shelf. Maximum weight 5kg
- Do not lean or sit on the shelf.
- During warehouse storage it is possible for the shelf to absorb moisture from the surrounding atmosphere, when heated during first use the shelf may bow.
- Keep heating on to allow the shelf to settle for 14 -21 days.
For further advise, customer care or request for spare parts please contact our customer service department on 01562 753040
Parts List:
1 x Radiator shelf 2x Brackets 4x Screws
Assembly:
Step 1:
Each end of the shelf has two pre-drilled holes, These predrilled holes are a
guide, if you find that the wall mountings for the radiator stop the shelf
from fitting correctly please reposition the brackets on the shelf for a
better fit. Step 2:
Locate the bracket over the holes; the angle of the bracket must point towards
the flat part of the shelf.
The flat part of the shelf sits nearest to the wall over the radiator.
Step 3:
Using two screws tighten the bracket to the shelf.
Repeat with second bracket. Step 4:
Turn the shelf over so the brackets are pointing down, then slide brackets
between wall and radiator until bracket supports itself. Making sure the
radiator is firmly fixed to the wall.