BEYAS TYN-333 LED Solar Pir Motion Sensor Light User Manual
- June 17, 2024
- BEYAS
Table of Contents
BEYAS TYN-333 LED Solar Pir Motion Sensor Light
PLEASE READ THE USER MANUAL CAREFULLY BEFORE USE
PACKAGE LIST
PRODUCT PARAMETERS
- The internal light sensor ensures the motion sensor will not activate during the day. In the darkness, the motion sensor will stand by.
- The product is equipped with a built-in lithium battery, please do not replace it by yourself, do not put it with household garbage, or place it near sources of heat. It should be taken to your local battery disposal center.
- A full charge requires up to 8 hours of sunlight. Mounting location, weather conditions, and seasonal variation will directly influence the actual working time of the light.
Introduction
When the lights don’t work properly:
- Confirm whether the switch is on.
- Confirm whether it has been used for a long time without solar charging and ensure it has been charged with enough solar energy before using.
- Confirm to use within the product sensing distance (Max 8 meters).
- Confirm whether the installation height of the product exceeds 6 meters.
- Make sure the product installation direction is correct (solar panel upward).
- Make sure nothing prevents the solar panel from receiving sunlight.
3 Different Working Modes
Model 1 : Strong light mode: With the Built-in motion sensor detector, the flood lights will provide max-brightness illumination when the sensor is activated, and last about 20s after no motion detection
Mode2: Alternating strong and low light mode: The solar lights will turn to strong light mode with motion detected, and turn to low mode after 20 seconds without motion detection
Mode3 : Continuous light mode: The security lights work all night (while doesn’t during)
Read User Manual Online (PDF format)
Loading......