SUPRENT BT575BX Beard Trimmer User Manual
- June 17, 2024
- SUPRENT
Table of Contents
SUPRENT BT575BX Beard Trimmer
SPECIFICATIONS
BASIC PARAMETERS
PRODUCT DESCRIPTION
- Fully charge the trimmer before you use it for the first time or after not using it for a long period ( When charging, please use a power adapter with an output voltage not higher than 5V 1A).
- The waterproof grade of the trimmer is IPX7. It is accepted to wash the whole product. In addition, avoid splashing the power interface when flushing. After rinsing, wipe with a clean cloth and store in a dry and well-ventilated place.
- Install and remove the guide comb. Make sure the trimmer is turned off before you install or remove the guide comb. Adjust the adjusting ring to the number 1, and then remove the comb as figure 1 and install the comb as figure 2.
- Install and remove the cutter head. Make sure the trimmer is turned off before you install or remove the cutter head. Remove the cutter head as the figure 3, and install the cutter head as the figure 4.
- When the charging indicator blinks, it indicates that the trimmer is charging. When the charging indicator is steady, it indicates that the battery is fully charged.
- The width of the cutter head is 3.3cm. It can be trimmed to a minimum of 0.5mm and a maximum of 20mm.
- To avoid potential problems such as loud noise or high temperature during use, we recommend dripping a small amount of oil on the blade head after using 3 to 5 times. We also advise replacing the blade head once a year to improve your user experience.
Warranty Description
From the date of purchase, the main part of the product can enjoy a one-year warranty service (excluding accessories). Product failures due to accidental damage, unauthorized repairs, improper storage and other man-made damage are not covered by the warranty.
After-sales Service
If you have any queries about our products, please feel free to contact us.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>