Kelly Miller Graphic 2 Round Jeweled Bathroom Mirror Instruction Manual
- June 17, 2024
- Kelly Miller
Table of Contents
Kelly Miller Graphic 2 Round Jeweled Bathroom Mirror
PARTS INCLUDED
A) MIRROR WITH FRENCH CLEAT AND SPARE PARTS
INSTALLATION STEPS
- Unpack all parts and place them on a protected work surface.
- Determine the exact location of the fixture and mark the holes on the wall surface using the holes in the aluminium hanger as guide.
- Drill small holes on each point location on the wall. Each hole should be just large enough to accommodate plastic wedge.
- Insert the plastic wedge into the holes on the wall.
- Mount the aluminium hanger into the wall using screw.
- Check that the aluminium hanger fixture is screwed into the wall.
- Place the pinboard with hanger cleat into the aluminium hanger fixture.
- Installation is complete.
The document includes diagrams illustrating the steps for mounting the aluminium hanger onto the wall and how to attach the pinboard with the hanger cleat to the aluminium hanger fixture.
CARE INSTRUCTIONS
To clean, use a soft and dry or damp cloth. Do not use an abrasive cleanser.
IMPORTANT SAFETY INSTRUCTIONS
Check with a professional to ensure your wall can tolerate the weight of the mirror. It is imperative that the mirror is mounted into a wall stud.
FAQ
- What tools are required for installation?
- A screwdriver is required for the installation, which is not included in the parts.
- Can I clean the mirror with any cleanser?
- No, use only a soft and dry or damp cloth to clean the mirror. Do not use abrasive cleansers.
- What should I check before installing the mirror?
- Ensure that your wall can support the weight of the mirror and that it is mounted into a wall stud for safety.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>