FNG8 BWH-SLFDIV3 Partition Wall Made Of Transparent Acrylic 6 Pieces Instruction Manual
- June 17, 2024
- FNG8
Table of Contents
FNG8 BWH-SLFDIV3 Partition Wall Made Of Transparent Acrylic 6 Pieces
Instruction For Use
STEP 1
Decide where you want the divider to go. We suggest measuring and marking out
the location before attaching. Then remove the film from the adhesive strip
STEP2
Before sticking down m1ake sure you are certain that it’s in the desired spot
as the adhesive is strong. Then carefully hold the divider over the chosen
area.
STEP3
Slowly lower the divider, then once you are happy, firmly press down on the
base to stick it down.
STEP4
Once these steps are complete, you can start organising.
MANUEL D’INSTRUCTIONS
STEP 1
Decide where the Partition wall should be installed.
We recommend the position var dem Attach to measure and close to mark. Then
remove them Film from the adhesive strip.
STEP 2
Make sure of this Glue down so that the Partition in the right place because
the adhesive strip is firmly in place liable. Then hold it Carefully move the
partition over the desired place.
STEP 3
Release the partition slowly down, and if you with the If you are satisfied,
print firmly down to her to stick on.
STEP-4
After these steps are done you can start organizing begin.
Customer Support
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>