Pacbrake L5831 Basic & Premium Air Horn Kits User Guide
- June 17, 2024
- Pacbrake
Table of Contents
Pacbrake L5831 Basic & Premium Air Horn Kits
Product Specifications:
- Model: L5831
- Recommended Air Tank Size: Minimum 1/2 gallon
- Minimum Air Pressure: 100 PSI
- Maximum Air Pressure: 150 PSI
Product Usage Instructions:
Air Horn Kit Types:
The Air Horn Kits are available in Basic and Premium versions. The Premium
kits are designed for vehicles without an onboard air system, while the Basic
kits are suitable for vehicles with an existing onboard air system.
Installation:
When installing the air horns, it is crucial to position them facing
rearward or downward to prevent the accumulation of dirt and moisture in the
chambers.
Solenoid Installation:
To install the solenoid, follow these steps:
- Remove the original air fitting from the air tank and replace it with a brass tee fitting.
- Install both the original and new air fittings.
- Tap into an ignition power source using a 5 AMP fuse.
CAUTION – Triple Train Horn Kits:
For the Triple Train Horn kits (Part No: 10314 / 10254), ensure correct
wiring of the solenoid (Part No: C10613):
- The BLACK wire must connect to ground.
- The RED wire must connect to power.
Warranty Information:
To be eligible for warranty coverage, the owner must either submit their
warranty card or register online within 30 days of the purchase date.
Frequently Asked Questions (FAQ):
-
Q: Can I use the air horn kit on any vehicle?
A: The air horn kit is designed for universal applications; however, it’s essential to check local regulations before installation, as some areas may not permit the use of air horns on passenger vehicles. -
Q: What is the recommended air tank size for the kit?
A: A minimum 1/2 gallon air tank is recommended for the air horn kit, with a minimum air pressure of 100 PSI and a maximum of 150 PSI for effective system activation. -
Q: How should I position the air horns during installation?
A: It is recommended to install the air horns facing rearward or downward to prevent dirt and moisture accumulation in the chambers.
Thank you and congratulations on the purchase of an Air Horn Kit.
IMPORTANT
Some municipalities do not allow the use of air horns on passenger vehicles,
please check the regulations in your area before installing this kit.
PLEASE NOTE : An air horn kit requires an onboard air source and an air tank to effectively activate the system. A minimum 1/2 gallon air tank, with a minimum of 100 PSI and a maximum of 150 PSI, is recommend
AIR HORN KITS
This manual is used across multiple kits. All kits are universal applications:
INSTALLATION
It is recommended to install the air horns facing rearward or down to avoid dirt & moisture accumulating in the chambers
CAUTION : The solenoid included in 10314 / 10254 “Triple Train Horn” kits (Part No: C10613) are polarity-dependent: The BLACK wire must link to ground, the RED wire must link to power. Incorrect wiring will result in immediate failure of the solenoid.
WARRANTY
To be eligible for warranty, the owner must submit their warranty card or register online within 30 days of the purchase date.
L5831_REV5_07.17.2023